diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json
index 865176a50d..dd1a25fd91 100644
--- a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json	
@@ -14,8 +14,8 @@
     "outer_wall_speed": "60",
     "sparse_infill_pattern": "gyroid",
     "sparse_infill_speed": "150",
-    "top_surface_speed": "150",
     "smooth_coefficient": "150",
+    "top_surface_speed": "150",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json
index 2773dbfec9..b937915567 100644
--- a/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json	
@@ -14,8 +14,8 @@
     "outer_wall_speed": "60",
     "sparse_infill_pattern": "gyroid",
     "sparse_infill_speed": "180",
-    "top_surface_speed": "150",
     "smooth_coefficient": "150",
+    "top_surface_speed": "150",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
diff --git a/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2D.json b/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2D.json
index a3dd7062c2..97d5c9741e 100644
--- a/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2D.json	
+++ b/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2D.json	
@@ -76,7 +76,6 @@
         "150"
     ],
     "compatible_printers": [
-        "Bambu Lab H2D 0.4 nozzle",
-        "Bambu Lab O1C 0.4 nozzle"
+        "Bambu Lab H2D 0.4 nozzle"
     ]
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json
index 22c49862e7..33b01933e3 100644
--- a/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json	
@@ -14,8 +14,8 @@
     "outer_wall_speed": "60",
     "sparse_infill_pattern": "gyroid",
     "sparse_infill_speed": "200",
-    "top_surface_speed": "150",
     "smooth_coefficient": "150",
+    "top_surface_speed": "150",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
diff --git a/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2D.json b/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2D.json
index 8470d5547a..d026879902 100644
--- a/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2D.json	
+++ b/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2D.json	
@@ -71,7 +71,6 @@
         "150"
     ],
     "compatible_printers": [
-        "Bambu Lab H2D 0.4 nozzle",
-        "Bambu Lab O1C 0.4 nozzle"
+        "Bambu Lab H2D 0.4 nozzle"
     ]
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json
index e41231bc4c..516192f597 100644
--- a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json	
@@ -8,8 +8,8 @@
     "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
     "elefant_foot_compensation": "0.15",
     "sparse_infill_density": "25%",
-    "wall_loops": "4",
     "smooth_coefficient": "150",
+    "wall_loops": "4",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 0.6 nozzle",
diff --git a/resources/profiles/BBL/process/fdm_process_common.json b/resources/profiles/BBL/process/fdm_process_common.json
index 6862940f25..7c619f5a36 100644
--- a/resources/profiles/BBL/process/fdm_process_common.json
+++ b/resources/profiles/BBL/process/fdm_process_common.json
@@ -13,6 +13,7 @@
     "brim_object_gap": "0.1",
     "brim_width": "5",
     "compatible_printers_condition": "",
+    "circle_compensation_manual_offset": "0",
     "default_acceleration": "10000",
     "detect_overhang_wall": "1",
     "detect_thin_wall": "0",
@@ -21,6 +22,7 @@
     "enable_arc_fitting": "1",
     "enable_prime_tower": "1",
     "enable_support": "0",
+    "enable_circle_compensation": "0",
     "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
     "gap_infill_speed": "30",
     "infill_combination": "0",
@@ -40,8 +42,14 @@
     "ironing_spacing": "0.15",
     "ironing_speed": "30",
     "ironing_type": "no ironing",
+    "infill_lock_depth": "1.0",
+    "initial_layer_travel_acceleration": "6000",
+    "infill_shift_step": "0.4",
+    "infill_rotate_step": "0",
     "layer_height": "0.2",
     "line_width": "0.42",
+    "locked_skin_infill_pattern": "crosszag",
+    "locked_skeleton_infill_pattern": "zigzag",
     "max_bridge_length": "0",
     "max_travel_detour_distance": "0",
     "minimum_sparse_infill_area": "15",
@@ -49,6 +57,7 @@
     "outer_wall_line_width": "0.42",
     "outer_wall_speed": "120",
     "overhang_totally_speed": "10",
+    "override_filament_scarf_seam_setting": "0",
     "pre_start_fan_time": [
         "0"
     ],
@@ -56,6 +65,11 @@
     "print_sequence": "by layer",
     "print_settings_id": "",
     "prime_tower_brim_width": "3",
+    "prime_tower_enable_framework": "0",
+    "prime_tower_lift_speed": "90",
+    "prime_tower_lift_height": "-1",
+    "prime_tower_max_speed": "90",
+    "prime_tower_flat_ironing": "0",
     "raft_layers": "0",
     "reduce_crossing_wall": "0",
     "reduce_infill_retraction": "1",
@@ -92,6 +106,11 @@
     "support_threshold_angle": "30",
     "support_top_z_distance": "0.2",
     "support_type": "normal(auto)",
+    "seam_slope_type": "none",
+    "seam_slope_start_height": "10%",
+    "seam_slope_gap": "0",
+    "seam_slope_min_length": "10",
+    "symmetric_infill_y_axis": "0",
     "top_shell_layers": "3",
     "top_shell_thickness": "0.8",
     "top_surface_line_width": "0.42",
@@ -107,16 +126,5 @@
     "wipe_tower_no_sparse_layers": "0",
     "xy_contour_compensation": "0",
     "xy_hole_compensation": "0",
-    "compatible_printers": [],
-    "smooth_coefficient": "80",
-    "overhang_totally_speed": "19",
-    "scarf_angle_threshold": "155",
-    "infill_shift_step": "0.4",
-    "infill_rotate_step": "0",
-    "prime_tower_enable_framework": "0",
-    "symmetric_infill_y_axis": "0",
-    "prime_tower_lift_speed": "90",
-    "prime_tower_lift_height": "-1",
-    "prime_tower_max_speed": "90",
-    "prime_tower_flat_ironing":"0"
+    "z_direction_outwall_speed_continuous": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_dual_common.json b/resources/profiles/BBL/process/fdm_process_dual_common.json
index d373125bec..173d694b07 100644
--- a/resources/profiles/BBL/process/fdm_process_dual_common.json
+++ b/resources/profiles/BBL/process/fdm_process_dual_common.json
@@ -8,6 +8,7 @@
     "default_acceleration": "10000",
     "enable_overhang_speed":"1",
     "gap_infill_speed": "50",
+    "initial_layer_travel_acceleration": "6000",
     "initial_layer_acceleration": "500",
     "initial_layer_infill_speed": "60",
     "initial_layer_speed": "30",
@@ -33,6 +34,13 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
+    "prime_tower_flat_ironing": "1",
+    "slowdown_start_height": "0",
+    "slowdown_start_speed": "1000",
+    "slowdown_start_acc": "100000",
+    "slowdown_end_height": "400",
+    "slowdown_end_speed": "1000",
+    "slowdown_end_acc": "100000",
     "small_perimeter_speed": "50%",
     "small_perimeter_threshold": "0",
     "smooth_coefficient": "2",
@@ -40,10 +48,10 @@
     "sparse_infill_speed": "250",
     "support_interface_speed": "80",
     "support_speed": "150",
+    "travel_acceleration": "10000",
     "top_surface_acceleration": "2000",
     "top_surface_speed": "200",
     "travel_speed": "500",
     "travel_speed_z": "0",
-    "z_direction_outwall_speed_continuous": "1",
-    "prime_tower_flat_ironing":"1"
+    "z_direction_outwall_speed_continuous": "1"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.06_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_single_0.06_nozzle_0.2.json
index 27e5efd187..03142a2d27 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.06_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.06_nozzle_0.2.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "40",
     "inner_wall_line_width": "0.22",
     "internal_solid_infill_line_width": "0.22",
+    "ironing_inset": "0.11",
     "layer_height": "0.06",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
-    "ironing_inset": "0.11",
     "sparse_infill_line_width": "0.22",
     "sparse_infill_speed": "100",
     "support_bottom_z_distance": "0.06",
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.08_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_single_0.08_nozzle_0.2.json
index 06d204b97b..759405303f 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.08_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.08_nozzle_0.2.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "40",
     "inner_wall_line_width": "0.22",
     "internal_solid_infill_line_width": "0.22",
+    "ironing_inset": "0.11",
     "layer_height": "0.08",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
-    "ironing_inset": "0.11",
     "sparse_infill_line_width": "0.22",
     "sparse_infill_speed": "100",
     "support_bottom_z_distance": "0.08",
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.10_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_single_0.10_nozzle_0.2.json
index 15de04e84c..dbdaa00266 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.10_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.10_nozzle_0.2.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "40",
     "inner_wall_line_width": "0.22",
     "internal_solid_infill_line_width": "0.22",
+    "ironing_inset": "0.11",
     "layer_height": "0.1",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
-    "ironing_inset": "0.11",
     "sparse_infill_line_width": "0.22",
     "sparse_infill_speed": "100",
     "support_bottom_z_distance": "0.1",
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.12_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_single_0.12_nozzle_0.2.json
index 74a109eae8..6d2024203c 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.12_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.12_nozzle_0.2.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "40",
     "inner_wall_line_width": "0.22",
     "internal_solid_infill_line_width": "0.22",
+    "ironing_inset": "0.11",
     "layer_height": "0.12",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
-    "ironing_inset": "0.11",
     "sparse_infill_line_width": "0.22",
     "sparse_infill_speed": "100",
     "support_bottom_z_distance": "0.12",
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.14_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_single_0.14_nozzle_0.2.json
index f4f6479555..27f9392425 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.14_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.14_nozzle_0.2.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "40",
     "inner_wall_line_width": "0.22",
     "internal_solid_infill_line_width": "0.22",
+    "ironing_inset": "0.11",
     "layer_height": "0.14",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
-    "ironing_inset": "0.11",
     "sparse_infill_line_width": "0.22",
     "sparse_infill_speed": "100",
     "support_bottom_z_distance": "0.14",
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.18_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_single_0.18_nozzle_0.6.json
index f1896dc456..e30aa34c51 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.18_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.18_nozzle_0.6.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "35",
     "inner_wall_line_width": "0.62",
     "internal_solid_infill_line_width": "0.62",
+    "ironing_inset": "0.31",
     "layer_height": "0.18",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
-    "ironing_inset": "0.31",
     "overhang_3_4_speed": "15",
     "sparse_infill_line_width": "0.62",
     "sparse_infill_speed": "100",
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.6.json
index 805718e40b..adeb1d4634 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.6.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "35",
     "inner_wall_line_width": "0.62",
     "internal_solid_infill_line_width": "0.62",
+    "ironing_inset": "0.31",
     "layer_height": "0.24",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
-    "ironing_inset": "0.31",
     "overhang_3_4_speed": "15",
     "sparse_infill_line_width": "0.62",
     "sparse_infill_speed": "100",
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.8.json
index a1278f553c..126df08ec5 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.8.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "35",
     "inner_wall_line_width": "0.82",
     "internal_solid_infill_line_width": "0.82",
+    "ironing_inset": "0.41",
     "layer_height": "0.24",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
-    "ironing_inset": "0.41",
     "overhang_3_4_speed": "25",
     "overhang_4_4_speed": "5",
     "sparse_infill_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.30_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_single_0.30_nozzle_0.6.json
index 26d1af49f0..22f063e678 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.30_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.30_nozzle_0.6.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "35",
     "inner_wall_line_width": "0.62",
     "internal_solid_infill_line_width": "0.62",
+    "ironing_inset": "0.31",
     "layer_height": "0.3",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
-    "ironing_inset": "0.31",
     "overhang_3_4_speed": "15",
     "sparse_infill_line_width": "0.62",
     "sparse_infill_speed": "100",
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.32_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_single_0.32_nozzle_0.8.json
index 3a447ac781..c2a64c7246 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.32_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.32_nozzle_0.8.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "35",
     "inner_wall_line_width": "0.82",
     "internal_solid_infill_line_width": "0.82",
+    "ironing_inset": "0.41",
     "layer_height": "0.32",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
-    "ironing_inset": "0.41",
     "overhang_3_4_speed": "25",
     "overhang_4_4_speed": "5",
     "sparse_infill_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.36_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_single_0.36_nozzle_0.6.json
index 68f196203c..25e6dfec81 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.36_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.36_nozzle_0.6.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "35",
     "inner_wall_line_width": "0.62",
     "internal_solid_infill_line_width": "0.62",
+    "ironing_inset": "0.31",
     "layer_height": "0.36",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
-    "ironing_inset": "0.31",
     "overhang_3_4_speed": "15",
     "sparse_infill_line_width": "0.62",
     "sparse_infill_speed": "100",
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.40_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_single_0.40_nozzle_0.8.json
index 2379706180..d18e153b36 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.40_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.40_nozzle_0.8.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "35",
     "inner_wall_line_width": "0.82",
     "internal_solid_infill_line_width": "0.82",
+    "ironing_inset": "0.41",
     "layer_height": "0.4",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
-    "ironing_inset": "0.41",
     "overhang_3_4_speed": "25",
     "overhang_4_4_speed": "5",
     "sparse_infill_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.42_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_single_0.42_nozzle_0.6.json
index 50ad950490..aab8737068 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.42_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.42_nozzle_0.6.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "35",
     "inner_wall_line_width": "0.62",
     "internal_solid_infill_line_width": "0.62",
+    "ironing_inset": "0.31",
     "layer_height": "0.42",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
-    "ironing_inset": "0.31",
     "overhang_3_4_speed": "15",
     "sparse_infill_line_width": "0.62",
     "sparse_infill_speed": "100",
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.48_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_single_0.48_nozzle_0.8.json
index d730f4364d..1089171e9c 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.48_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.48_nozzle_0.8.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "35",
     "inner_wall_line_width": "0.82",
     "internal_solid_infill_line_width": "0.82",
+    "ironing_inset": "0.31",
     "layer_height": "0.48",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
-    "ironing_inset": "0.41",
     "overhang_3_4_speed": "25",
     "overhang_4_4_speed": "5",
     "sparse_infill_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_single_0.56_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_single_0.56_nozzle_0.8.json
index e8d0ee2c81..8281402490 100644
--- a/resources/profiles/BBL/process/fdm_process_single_0.56_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_single_0.56_nozzle_0.8.json
@@ -12,10 +12,10 @@
     "initial_layer_speed": "35",
     "inner_wall_line_width": "0.82",
     "internal_solid_infill_line_width": "0.82",
+    "ironing_inset": "0.41",
     "layer_height": "0.56",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
-    "ironing_inset": "0.41",
     "overhang_3_4_speed": "25",
     "overhang_4_4_speed": "5",
     "sparse_infill_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_single_common.json b/resources/profiles/BBL/process/fdm_process_single_common.json
index cc60ff52c4..67e5ce4f04 100644
--- a/resources/profiles/BBL/process/fdm_process_single_common.json
+++ b/resources/profiles/BBL/process/fdm_process_single_common.json
@@ -24,6 +24,12 @@
     "print_extruder_variant": [
         "Direct Drive Standard"
     ],
+    "slowdown_start_height": "0",
+    "slowdown_start_speed": "1000",
+    "slowdown_start_acc": "100000",
+    "slowdown_end_height": "400",
+    "slowdown_end_speed": "1000",
+    "slowdown_end_acc": "100000",
     "small_perimeter_speed": "50%",
     "small_perimeter_threshold": "0",
     "sparse_infill_acceleration": "100%",