diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot index c5224491b3..5dc2cd5328 100644 --- a/localization/i18n/OrcaSlicer.pot +++ b/localization/i18n/OrcaSlicer.pot @@ -2935,10 +2935,10 @@ msgstr "" msgid "AMS Slots" msgstr "" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3514,7 +3514,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" #, possible-c-format, possible-boost-format @@ -3526,12 +3526,12 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" msgid "" @@ -3597,8 +3597,8 @@ msgid "" msgstr "" msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4155,7 +4155,7 @@ msgstr "" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4266,9 +4266,6 @@ msgstr "" msgid "Assemble Control" msgstr "" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5019,11 +5016,6 @@ msgstr "" msgid "No printers." msgstr "" -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "" @@ -8607,10 +8599,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -9202,7 +9194,7 @@ msgstr "" msgid "Preferred orientation" msgstr "" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "" msgid "Printer preset names" @@ -9798,7 +9790,7 @@ msgstr "" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" @@ -10432,7 +10424,7 @@ msgid "Default color" msgstr "" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -10912,7 +10904,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -11077,7 +11069,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -11412,9 +11404,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -11423,9 +11415,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -11452,11 +11444,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -11638,7 +11630,7 @@ msgstr "" msgid "Ironing speed" msgstr "" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "" msgid "Ironing angle" @@ -11771,8 +11763,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -11917,7 +11908,7 @@ msgid "" "is enabled." msgstr "" -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "" msgid "Configuration notes" @@ -12039,7 +12030,7 @@ msgid "" "speed to print. For 100%% overhang, bridge speed is used." msgstr "" -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "" msgid "" @@ -12078,7 +12069,7 @@ msgstr "" msgid "Printer type" msgstr "" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "" msgid "Printer notes" @@ -12478,7 +12469,7 @@ msgstr "" msgid "Skirt distance" msgstr "" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "" msgid "Skirt start point" @@ -12575,7 +12566,7 @@ msgstr "" msgid "Solid infill" msgstr "" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "" msgid "" @@ -13288,7 +13279,7 @@ msgstr "" msgid "Wipe tower rotation angle" msgstr "" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "" msgid "Width of the brim." @@ -13344,7 +13335,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -13864,7 +13855,7 @@ msgstr "" msgid "Load custom G-code from json." msgstr "" -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "" msgid "Load filament IDs for each object." @@ -13899,25 +13890,25 @@ msgstr "" msgid "MakerLab name" msgstr "" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "" msgid "MakerLab version" msgstr "" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "" msgid "metadata name list" msgstr "" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "" msgid "metadata value list" msgstr "" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "" msgid "Allow 3mf with newer version to be sliced" @@ -14165,7 +14156,7 @@ msgstr "" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" -msgid "Layer z" +msgid "Layer Z" msgstr "" msgid "" @@ -14173,7 +14164,7 @@ msgid "" "layer." msgstr "" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "" msgid "Height of the last layer above the print bed." @@ -15441,8 +15432,8 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" diff --git a/localization/i18n/ca/OrcaSlicer_ca.po b/localization/i18n/ca/OrcaSlicer_ca.po index d2a9f65332..995d10933c 100644 --- a/localization/i18n/ca/OrcaSlicer_ca.po +++ b/localization/i18n/ca/OrcaSlicer_ca.po @@ -3094,10 +3094,10 @@ msgstr "Pas" msgid "AMS Slots" msgstr "Ranures AMS" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3756,7 +3756,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Velocitat volumètrica màxima massa petita.\n" "Restableix a 0.5" @@ -3773,14 +3773,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Alçada de capa massa petita.\n" "Restableix a 0.2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Espaiat de planxa massa petit.\n" "Restableix a 0.1" @@ -3888,8 +3888,8 @@ msgstr "" "Restablert a 0." msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4475,7 +4475,7 @@ msgstr "Seqüència" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4586,9 +4586,6 @@ msgstr "Vista de secció" msgid "Assemble Control" msgstr "Control d'ensamblatge" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5387,11 +5384,6 @@ msgstr "Tornar a carregar la llista de fitxers des de la impressora." msgid "No printers." msgstr "No hi ha cap Impressora." -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "Carregant llista de fitxers..." @@ -9391,10 +9383,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -10109,7 +10101,7 @@ msgstr "L'alçada màxima imprimible està limitada pel mecanisme d'impressora" msgid "Preferred orientation" msgstr "Orientació preferida" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "" "Orientar automàticament els stls a l'eix Z després de la importació inicial" @@ -10950,9 +10942,12 @@ msgstr "Radi de detecció de l'orella" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" +"La geometria es simplificarà abans de detectar angles pronunciats. Aquest " +"paràmetre indica la longitud mínima de la desviació per a la simplificació.\n" +"0 per desactivar" msgid "Select printers" msgstr "" @@ -11867,7 +11862,7 @@ msgid "Default color" msgstr "Color predeterminat" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -12464,7 +12459,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -12663,7 +12658,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -13077,9 +13072,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -13088,9 +13083,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -13117,11 +13112,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -13353,8 +13348,8 @@ msgstr "" msgid "Ironing speed" msgstr "Velocitat de planxat" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "Velocitat d'impressió de les línies de planxat" msgid "Ironing angle" msgstr "Angle de planxat" @@ -13496,8 +13491,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -13698,7 +13692,7 @@ msgstr "" "intentar mantenir el temps mínim de capa anterior, quan \"alentir per a un " "millor refredament de la capa\" està habilitat." -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Diàmetre del broquet" msgid "Configuration notes" @@ -13855,7 +13849,7 @@ msgstr "" "utilitzar una velocitat diferent per imprimir. Per al voladís del 100%%, " "s'utilitza la velocitat de pont." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "Filament per imprimir parets" msgid "" @@ -13910,7 +13904,7 @@ msgstr "" msgid "Printer type" msgstr "Tipus d'impressora" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "Tipus d'impressora" msgid "Printer notes" @@ -14416,7 +14410,7 @@ msgstr "" msgid "Skirt distance" msgstr "Distància de la faldilla" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Distància de la faldilla a la Vora d'Adherència o a l'objecte" msgid "Skirt start point" @@ -14539,7 +14533,7 @@ msgstr "" msgid "Solid infill" msgstr "Farciment sòlid" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "Filament per imprimir farciment sòlid" msgid "" @@ -15442,7 +15436,7 @@ msgstr "Amplada de la Torre de Purga" msgid "Wipe tower rotation angle" msgstr "Angle de rotació de la Torre de Purga" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Angle de rotació de la Torre de Purga pel que fa a l'eix X." msgid "Width of the brim." @@ -15521,7 +15515,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -16162,7 +16156,7 @@ msgstr "Carregar Codi-G personalitzat" msgid "Load custom G-code from json." msgstr "Carregar el Codi-G personalitzat des de json." -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "Carregar els identificadors del filament" msgid "Load filament IDs for each object." @@ -16202,25 +16196,25 @@ msgstr "" msgid "MakerLab name" msgstr "Nom MakerLab" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "Nom de MakerLab per generar aquest 3mf" msgid "MakerLab version" msgstr "Versió MakerLab" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "Versió de MakerLab per generar aquest 3mf" msgid "metadata name list" msgstr "llista de noms de metadades" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "llista de noms de metadades afegida a 3MF" msgid "metadata value list" msgstr "llista de valors de metadades" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "llista de valors de metadades afegida a 3MF" msgid "Allow 3mf with newer version to be sliced" @@ -16510,7 +16504,7 @@ msgstr "" "Índex de la capa actual. Basat en 1( és a dir, la primera capa és el número " "1 )." -msgid "Layer z" +msgid "Layer Z" msgstr "Capa Z" msgid "" @@ -16520,7 +16514,7 @@ msgstr "" "Alçada de la capa actual sobre el llit d'impressió, mesurada a la part " "superior de la capa." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "Capa màxima Z" msgid "Height of the last layer above the print bed." @@ -17987,8 +17981,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -19261,17 +19255,6 @@ msgstr "" #~ msgid "Enable this option to use classic mode." #~ msgstr "Activeu aquesta opció per utilitzar el mode clàssic" -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "La geometria es simplificarà abans de detectar angles pronunciats. Aquest " -#~ "paràmetre indica la longitud mínima de la desviació per a la " -#~ "simplificació.\n" -#~ "0 per desactivar" - #~ msgid "Compatible machine" #~ msgstr "Màquina compatible" @@ -19284,21 +19267,12 @@ msgstr "" #~ msgid "Default filament color" #~ msgstr "Color del filament predeterminat" -#~ msgid "mm³/s" -#~ msgstr "mm³/s" - -#~ msgid "g/cm³" -#~ msgstr "g/cm³" - #~ msgid "Rotate solid infill direction" #~ msgstr "Rotar la direcció de farciment sòlid" #~ msgid "Rotate the solid infill direction by 90° for each layer." #~ msgstr "Rotar la direcció de farciment sòlid 90° per a cada capa." -#~ msgid "Print speed of ironing lines." -#~ msgstr "Velocitat d'impressió de les línies de planxat" - #~ msgid "" #~ "Flow Compensation Model, used to adjust the flow for small infill areas. " #~ "The model is expressed as a comma separated pair of values for extrusion " @@ -19401,7 +19375,7 @@ msgstr "" #~ msgid "Downward machines settings" #~ msgstr "configuració descendent de les màquines" -#~ msgid "Load filament ids for each object" +#~ msgid "Load filament IDs for each object" #~ msgstr "Carregar els identificadors del filament per a cada objecte" #~ msgid "" diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po index 4d22297470..ec75962583 100644 --- a/localization/i18n/cs/OrcaSlicer_cs.po +++ b/localization/i18n/cs/OrcaSlicer_cs.po @@ -3046,10 +3046,10 @@ msgstr "Krok" msgid "AMS Slots" msgstr "AMS sloty" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3680,7 +3680,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Příliš malá maximální objemová rychlost.\n" "Obnovit na 0,5" @@ -3697,14 +3697,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Příliš malá výška vrstvy.\n" "Obnovit na 0,2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Příliš malá rozteč žehlení.\n" "Obnovit na 0,1" @@ -3800,8 +3800,8 @@ msgid "" msgstr "" msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4381,7 +4381,7 @@ msgstr "Sekvence" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4492,9 +4492,6 @@ msgstr "Sekce Zobrazení" msgid "Assemble Control" msgstr "Ovládání sestavy" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5273,11 +5270,6 @@ msgstr "" msgid "No printers." msgstr "Žádné tiskárny." -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "Načítání seznamu souborů..." @@ -9105,10 +9097,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -9771,7 +9763,7 @@ msgstr "Maximální tisknutelná výška, která je omezena mechanismem tiskárn msgid "Preferred orientation" msgstr "" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "" msgid "Printer preset names" @@ -10437,9 +10429,12 @@ msgstr "Poloměr detekce uší límce" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" +"Geometrie bude zredukována před detekcí ostrých úhlů. Tento parametr udává " +"minimální délku odchylky pro redukci.\n" +"0 pro deaktivaci" msgid "Select printers" msgstr "" @@ -11128,7 +11123,7 @@ msgid "Default color" msgstr "Výchozí barva" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -11678,7 +11673,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -11859,7 +11854,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -12235,9 +12230,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -12246,9 +12241,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -12275,11 +12270,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -12485,8 +12480,8 @@ msgstr "" msgid "Ironing speed" msgstr "Rychlost žehlení" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "Rychlost tisku žehlících linek" msgid "Ironing angle" msgstr "Úhel žehlení" @@ -12624,8 +12619,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -12803,7 +12797,7 @@ msgid "" "is enabled." msgstr "" -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Průměr trysky" msgid "Configuration notes" @@ -12952,7 +12946,7 @@ msgstr "" "Zjistěte procento převisů vzhledem k šířce extruze a použijte jinou rychlost " "tisku. Pro 100%% převisy se použije rychlost mostu." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "" msgid "" @@ -12997,7 +12991,7 @@ msgstr "" msgid "Printer type" msgstr "Typ tiskárny" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "" msgid "Printer notes" @@ -13440,7 +13434,7 @@ msgstr "" msgid "Skirt distance" msgstr "Vzdálenost obrysu" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Vzdálenost od Obrysu k Límci nebo předmětu" msgid "Skirt start point" @@ -13545,7 +13539,7 @@ msgstr "" msgid "Solid infill" msgstr "Plná výplň" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "" msgid "" @@ -14357,7 +14351,7 @@ msgstr "Šířka pro čistící věž" msgid "Wipe tower rotation angle" msgstr "Úhel natočení čistící věže" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Úhel natočení čistící věže s ohledem na osu X." msgid "Width of the brim." @@ -14415,7 +14409,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -15016,7 +15010,7 @@ msgstr "Načíst vlastní G-kód" msgid "Load custom G-code from json." msgstr "Načíst vlastní G-kód z JSON" -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "" msgid "Load filament IDs for each object." @@ -15051,25 +15045,25 @@ msgstr "" msgid "MakerLab name" msgstr "" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "" msgid "MakerLab version" msgstr "" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "" msgid "metadata name list" msgstr "" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "" msgid "metadata value list" msgstr "" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "" msgid "Allow 3mf with newer version to be sliced" @@ -15336,7 +15330,7 @@ msgstr "Číslo vrstvy" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" -msgid "Layer z" +msgid "Layer Z" msgstr "" msgid "" @@ -15345,7 +15339,7 @@ msgid "" msgstr "" "Výška aktuální vrstvy nad tiskovou podložkou, měřeno k hornímu okraji vrstvy." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "" msgid "Height of the last layer above the print bed." @@ -16696,8 +16690,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -17766,16 +17760,6 @@ msgstr "" #~ msgid "Enable this option to use classic mode." #~ msgstr "Povolte tuto možnost pro použití klasického režimu" -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "Geometrie bude zredukována před detekcí ostrých úhlů. Tento parametr " -#~ "udává minimální délku odchylky pro redukci.\n" -#~ "0 pro deaktivaci" - #~ msgid "Compatible machine" #~ msgstr "Kompatibilní stroj" @@ -17788,15 +17772,6 @@ msgstr "" #~ msgid "Default filament color" #~ msgstr "Výchozí barva filamentu" -#~ msgid "mm³/s" -#~ msgstr "mm³/s" - -#~ msgid "g/cm³" -#~ msgstr "g/cm³" - -#~ msgid "Print speed of ironing lines." -#~ msgstr "Rychlost tisku žehlících linek" - #~ msgid "" #~ "The highest printable layer height for the extruder. Used to limit the " #~ "maximum layer height when adaptive layer height is enabled." diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po index 82e01c74be..f98d26c1f3 100644 --- a/localization/i18n/de/OrcaSlicer_de.po +++ b/localization/i18n/de/OrcaSlicer_de.po @@ -3119,10 +3119,10 @@ msgstr "Schritt" msgid "AMS Slots" msgstr "AMS Slots" -msgid "Left Ams" +msgid "Left AMS" msgstr "Linker AMS-Slot" -msgid "Right Ams" +msgid "Right AMS" msgstr "Rechter AMS-Slot" msgid "" @@ -3795,7 +3795,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Zu kleine maximale volumetrische Geschwindigkeit.\n" "Wert wurde auf 0,5 zurückgesetzt" @@ -3812,14 +3812,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Zu geringe Schichthöhe.\n" "Auf 0,2 zurücksetzen" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Zu kleiner Ironing-Abstand.\n" "Auf 0,1 zurückgesetzt" @@ -3926,8 +3926,8 @@ msgstr "" "auf 0 gesetzt" msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" "Die Verriegelungstiefe sollte kleiner als die Hauttiefe sein.\n" "Auf 50 % der Hauttiefe zurücksetzen." @@ -4527,7 +4527,7 @@ msgstr "Reihenfolge" msgid "object selection" msgstr "Objektauswahl" -msgid "part selectiont" +msgid "part selection" msgstr "Teileauswahl" msgid "number keys" @@ -4638,9 +4638,6 @@ msgstr "Schnittansicht" msgid "Assemble Control" msgstr "Montagekontrolle" -msgid "part selection" -msgstr "Teileauswahl" - msgid "Selection Mode" msgstr "Auswahlmodus" @@ -5449,14 +5446,6 @@ msgstr "Dateiliste vom Drucker neu laden." msgid "No printers." msgstr "Keine Drucker." -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" -"Bitte überprüfen Sie das Netzwerk und versuchen Sie es erneut. Sie können " -"den Drucker neu starten oder aktualisieren, wenn das Problem weiterhin " -"besteht." - msgid "Loading file list..." msgstr "Dateiliste laden..." @@ -9507,10 +9496,10 @@ msgstr "" msgid "Air Pump" msgstr "Luftpumpe" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "Laser 10W" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "Laser 40W" msgid "Cutting Module" @@ -10242,7 +10231,7 @@ msgstr "" msgid "Preferred orientation" msgstr "Bevorzugte Ausrichtung" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "Automatische Ausrichtung von STLs auf der Z-Achse beim Import" msgid "Printer preset names" @@ -11098,12 +11087,12 @@ msgstr "Radius für die Erkennung von Brim-Ohren" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" "Die Geometrie wird vor der Erkennung scharfer Winkel reduziert. Dieser " "Parameter ist ein Indikator für die minimale Länge der Abweichung für die " -"Reduzierung. \n" +"Reduzierung.\n" "0 zum Deaktivieren." msgid "Select printers" @@ -12015,7 +12004,7 @@ msgid "Default color" msgstr "Standardfarbe" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" "Standard-Filamentfarbe\n" @@ -12624,7 +12613,7 @@ msgid "Default jerk." msgstr "Default Ruckwert" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" "Marlin Firmware Junction Deviation (ersetzt die traditionelle XY-" "Ruckeinstellung)" @@ -12832,7 +12821,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -13282,9 +13271,9 @@ msgstr "Dichte der Skelettfüllung" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" "Der verbleibende Teil des Modellkonturs nach dem Entfernen einer bestimmten " "Tiefe von der Oberfläche wird als Skelett bezeichnet. Dieser Parameter wird " @@ -13298,9 +13287,9 @@ msgstr "Dichte der Außenhautfüllung" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" "Der Teil der äußeren Oberfläche des Modells innerhalb eines bestimmten " "Tiefenbereichs wird als Haut bezeichnet. Dieser Parameter wird verwendet, um " @@ -13334,11 +13323,11 @@ msgstr "Linienbreite der Skelettfüllung" msgid "Adjust the line width of the selected skeleton paths." msgstr "Passen Sie die Linienbreite der ausgewählten Skelettpfade an." -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "Symmetrische Füllung Y-Achse" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -13578,8 +13567,8 @@ msgstr "" msgid "Ironing speed" msgstr "Geschwindigkeit beim Glätten" -msgid "Print speed of ironing lines" -msgstr "Druckgeschwindigkeit der Glättlinien" +msgid "Print speed of ironing lines." +msgstr "Druckgeschwindigkeit der Glättlinien." msgid "Ironing angle" msgstr "Glättwinkel" @@ -13726,8 +13715,7 @@ msgid "Maximum Junction Deviation" msgstr "Maximale Verbindungsabweichung" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" "Maximale Verbindungsabweichung (M205 J, gilt nur, wenn JD > 0 für Marlin " "Firmware)" @@ -13928,7 +13916,7 @@ msgstr "" "definierte minimale Schichtzeit einzuhalten, wenn die Verlangsamung für eine " "bessere Schichtkühlung aktiviert ist." -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Düsendurchmesser" msgid "Configuration notes" @@ -14084,7 +14072,7 @@ msgstr "" "verwenden hierfür eine unterschiedliche Druckgeschwindigkeiten. Bei einem " "100%% Überhang wird die Brückengeschwindigkeit verwendet." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "Filament für den Druck der Wände" msgid "" @@ -14140,7 +14128,7 @@ msgstr "" msgid "Printer type" msgstr "Druckertyp" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "Typ des Druckers" msgid "Printer notes" @@ -14649,7 +14637,7 @@ msgstr "" msgid "Skirt distance" msgstr "Abstand der Umrandung" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Abstand von der Umrandung zum Rand oder zum Objekt" msgid "Skirt start point" @@ -14779,7 +14767,7 @@ msgstr "" msgid "Solid infill" msgstr "Massive Füllung" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "Filament für den Druck der massiven Füllung" msgid "" @@ -15713,7 +15701,7 @@ msgstr "Breite des Reinigungsturms." msgid "Wipe tower rotation angle" msgstr "Winkel der Reinigungsturmrotation" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Winkel der Reinigungsturmrotation in Bezug auf die X-Achse." msgid "Width of the brim." @@ -15798,7 +15786,7 @@ msgstr "Extralänge der Rippe" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" "Positive Werte können die Größe der Rippenwand erhöhen, während negative " @@ -16450,7 +16438,7 @@ msgstr "Lade benutzerdefinierten G-Code" msgid "Load custom G-code from json." msgstr "Lade benutzerdefinierten G-Code aus json." -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "Lade Filament-IDs" msgid "Load filament IDs for each object." @@ -16492,25 +16480,25 @@ msgstr "" msgid "MakerLab name" msgstr "MakerLab-Name" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "MakerLab-Name zum Generieren dieses 3mf" msgid "MakerLab version" msgstr "MakerLab-Version" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "MakerLab-Version zum Generieren dieses 3mf" msgid "metadata name list" msgstr "Metadatennamenliste" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "Metadatennamenliste, wird in die 3mf hinzugefügt" msgid "metadata value list" msgstr "Metadatenwertliste" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "Metadatenwertliste, wird in die 3mf hinzugefügt" msgid "Allow 3mf with newer version to be sliced" @@ -16799,7 +16787,7 @@ msgstr "" "Index der aktuellen Schicht. Einsbasiert (d.h. die erste Schicht ist Nummer " "1)." -msgid "Layer z" +msgid "Layer Z" msgstr "Layer Z" msgid "" @@ -16809,8 +16797,8 @@ msgstr "" "Höhe der aktuellen Schicht über dem Druckbett, gemessen an der Oberseite der " "Schicht." -msgid "Maximal layer z" -msgstr "Maximale Schichtdicke z" +msgid "Maximal layer Z" +msgstr "Maximale Schichtdicke Z" msgid "Height of the last layer above the print bed." msgstr "Höhe der letzten Schicht über dem Druckbett." @@ -18311,12 +18299,12 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" -"Die Datei: %s \n" -"wurde möglicherweise von einem anderen Programm geöffnet. \n" +"Die Datei: %s\n" +"wurde möglicherweise von einem anderen Programm geöffnet.\n" "Bitte schließen Sie es und versuchen Sie es erneut." msgid "" @@ -19614,17 +19602,6 @@ msgstr "" #~ msgid "Enable this option to use classic mode." #~ msgstr "Diese Option aktivieren, um den klassischen Modus zu verwenden" -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "Die Geometrie wird vor der Erkennung von scharfen Winkeln reduziert. " -#~ "DieserParameter gibt die minimale Länge der Abweichung für die " -#~ "Reduzierung an.\n" -#~ "0, um die Reduzierung zu deaktivieren." - #~ msgid "Compatible machine" #~ msgstr "Kompatible Maschine" @@ -19637,21 +19614,12 @@ msgstr "" #~ msgid "Default filament color" #~ msgstr "Standard-Filamentfarbe" -#~ msgid "mm³/s" -#~ msgstr "mm³/s" - -#~ msgid "g/cm³" -#~ msgstr "g/cm³" - #~ msgid "Rotate solid infill direction" #~ msgstr "Massives Füllmuster drehen" #~ msgid "Rotate the solid infill direction by 90° for each layer." #~ msgstr "Drehe das massive Füllmuster um 90° für jede Schicht." -#~ msgid "Print speed of ironing lines." -#~ msgstr "Druckgeschwindigkeit der Glättlinien." - #~ msgid "" #~ "Flow Compensation Model, used to adjust the flow for small infill areas. " #~ "The model is expressed as a comma separated pair of values for extrusion " @@ -19749,7 +19717,7 @@ msgstr "" #~ msgid "Downward machines settings" #~ msgstr "Einstellungen für abwärtskompatible Maschinen" -#~ msgid "Load filament ids for each object" +#~ msgid "Load filament IDs for each object" #~ msgstr "Lade Filament-IDs für jedes Objekt" #~ msgid "" @@ -20581,13 +20549,6 @@ msgstr "" #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" #~ msgstr "Bitte geben Sie einen gültigen Wert ein (K in 0~0.3, N in 0.6~2.0)" -#~ msgid "Select connected printetrs (0/6)" -#~ msgstr "Wählen die verbundenen Drucker (0/6)" - -#, c-format, boost-format -#~ msgid "Select Connected Printetrs (%d/6)" -#~ msgstr "Wählen die verbundenen Drucker (%d/6)" - #~ msgid "PrintingPause" #~ msgstr "Druckpause" diff --git a/localization/i18n/en/OrcaSlicer_en.po b/localization/i18n/en/OrcaSlicer_en.po index 6ac6c793fc..9fb6f0c341 100644 --- a/localization/i18n/en/OrcaSlicer_en.po +++ b/localization/i18n/en/OrcaSlicer_en.po @@ -2950,10 +2950,10 @@ msgstr "" msgid "AMS Slots" msgstr "" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3555,7 +3555,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Too small max volumetric speed.\n" "Value was reset to 0.5" @@ -3572,14 +3572,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Layer height too small\n" "It has been reset to 0.2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Ironing spacing too small\n" "It has been reset to 0.1" @@ -3660,8 +3660,8 @@ msgid "" msgstr "" msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4221,7 +4221,7 @@ msgstr "" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4332,9 +4332,6 @@ msgstr "" msgid "Assemble Control" msgstr "Assembly Control" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5092,11 +5089,6 @@ msgstr "" msgid "No printers." msgstr "" -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "" @@ -8773,10 +8765,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -9396,7 +9388,7 @@ msgstr "" msgid "Preferred orientation" msgstr "" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "" msgid "Printer preset names" @@ -10035,7 +10027,7 @@ msgstr "" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" @@ -10708,7 +10700,7 @@ msgid "Default color" msgstr "" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -11206,7 +11198,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -11380,7 +11372,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -11725,9 +11717,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -11736,9 +11728,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -11765,11 +11757,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -11961,8 +11953,8 @@ msgstr "" msgid "Ironing speed" msgstr "" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "This is the print speed for ironing lines." msgid "Ironing angle" msgstr "" @@ -12096,8 +12088,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -12244,8 +12235,8 @@ msgid "" "is enabled." msgstr "" -msgid "Diameter of nozzle" -msgstr "The diameter of the nozzle" +msgid "The diameter of nozzle." +msgstr "" msgid "Configuration notes" msgstr "" @@ -12372,7 +12363,7 @@ msgstr "" "This detects the overhang percentage relative to line width and uses a " "different speed to print. For 100%% overhang, bridging speed is used." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "" msgid "" @@ -12411,7 +12402,7 @@ msgstr "" msgid "Printer type" msgstr "" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "" msgid "Printer notes" @@ -12822,7 +12813,7 @@ msgstr "" msgid "Skirt distance" msgstr "" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "This is the distance from the skirt to the brim or the object." msgid "Skirt start point" @@ -12922,7 +12913,7 @@ msgstr "" msgid "Solid infill" msgstr "" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "" msgid "" @@ -13679,7 +13670,7 @@ msgstr "This is the width of prime towers." msgid "Wipe tower rotation angle" msgstr "" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "" msgid "Width of the brim." @@ -13735,7 +13726,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -14278,7 +14269,7 @@ msgstr "" msgid "Load custom G-code from json." msgstr "" -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "" msgid "Load filament IDs for each object." @@ -14313,25 +14304,25 @@ msgstr "" msgid "MakerLab name" msgstr "" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "" msgid "MakerLab version" msgstr "" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "" msgid "metadata name list" msgstr "" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "" msgid "metadata value list" msgstr "" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "" msgid "Allow 3mf with newer version to be sliced" @@ -14579,7 +14570,7 @@ msgstr "" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" -msgid "Layer z" +msgid "Layer Z" msgstr "" msgid "" @@ -14587,7 +14578,7 @@ msgid "" "layer." msgstr "" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "" msgid "Height of the last layer above the print bed." @@ -15910,8 +15901,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -16818,9 +16809,6 @@ msgstr "" #~ "The configuration package is incompatible with the current version of " #~ "Bambu Studio." -#~ msgid "Print speed of ironing lines." -#~ msgstr "This is the print speed for ironing lines." - #~ msgid "" #~ "The highest printable layer height for the extruder. Used to limit the " #~ "maximum layer height when adaptive layer height is enabled." diff --git a/localization/i18n/es/OrcaSlicer_es.po b/localization/i18n/es/OrcaSlicer_es.po index 5c3692c18a..af6ca84324 100644 --- a/localization/i18n/es/OrcaSlicer_es.po +++ b/localization/i18n/es/OrcaSlicer_es.po @@ -3109,10 +3109,10 @@ msgstr "Paso" msgid "AMS Slots" msgstr "Ranuras AMS" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3774,7 +3774,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Velocidad volumétrica máxima demasiado baja.\n" "Restableciendo a 0,5" @@ -3791,14 +3791,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Altura de la capa demasiado pequeña.\n" "Restableciendo a 0,2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Espaciado del alisado demasiado pequeño.\n" "Restableciendo a 0,1" @@ -3907,8 +3907,8 @@ msgstr "" "Restableciendo a 0." msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4500,7 +4500,7 @@ msgstr "Secuencia" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4611,9 +4611,6 @@ msgstr "Vista de Sección" msgid "Assemble Control" msgstr "Control de Ensamblado" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5410,11 +5407,6 @@ msgstr "Recarga la lista de archivos desde la impresora." msgid "No printers." msgstr "No hay impresoras." -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "Cargando lista de archivos..." @@ -9401,10 +9393,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -10113,7 +10105,7 @@ msgstr "Altura máxima imprimible limitada por el mecanismo de la impresora" msgid "Preferred orientation" msgstr "Orientación preferida" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "" "Orientar automáticamente los stls en el eje Z en la importación inicial" @@ -10916,9 +10908,12 @@ msgstr "Radio de detección de Orejas de borde" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" +"La geometría se verá diezmada antes de detectar angulos agudos. Este " +"parámetro indica la longitud mínima de desviación para el diezmado\n" +"0 para desactivar" msgid "Select printers" msgstr "" @@ -11777,7 +11772,7 @@ msgid "Default color" msgstr "Color por defecto" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -12376,7 +12371,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -12562,7 +12557,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -12959,9 +12954,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -12970,9 +12965,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -12999,11 +12994,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -13234,8 +13229,8 @@ msgstr "" msgid "Ironing speed" msgstr "Velocidad de alisado" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "Velocidad de impresión de las líneas de alisado." msgid "Ironing angle" msgstr "Ángulo de alisado" @@ -13377,8 +13372,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -13562,7 +13556,7 @@ msgid "" "is enabled." msgstr "" -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Diámetro de boquilla" msgid "Configuration notes" @@ -13725,7 +13719,7 @@ msgstr "" "utiliza diferentes velocidades para imprimir. Para el 100%% de voladizo, se " "utiliza la velocidad de puente." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "Filamento usado para imprimir perímetros" msgid "" @@ -13780,7 +13774,7 @@ msgstr "" msgid "Printer type" msgstr "Tipo de impresora" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "El tipo de impresora" msgid "Printer notes" @@ -14286,7 +14280,7 @@ msgstr "" msgid "Skirt distance" msgstr "Distancia de falda" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Distancia de la falda al borde de adherencia o al objeto" msgid "Skirt start point" @@ -14411,7 +14405,7 @@ msgstr "" msgid "Solid infill" msgstr "Relleno sólido interno" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "Filamento para imprimir relleno sólido interno" msgid "" @@ -15305,7 +15299,7 @@ msgstr "Ancho de la torre de purga" msgid "Wipe tower rotation angle" msgstr "Ángulo de rotación de torre de purga" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Ángulo de rotación con respecto al eje X." msgid "Width of the brim." @@ -15384,7 +15378,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -16019,7 +16013,7 @@ msgstr "Cargar G-Code personalizado" msgid "Load custom G-code from json." msgstr "Cargar G-Code personalizado desde json." -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "" msgid "Load filament IDs for each object." @@ -16054,25 +16048,25 @@ msgstr "" msgid "MakerLab name" msgstr "" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "" msgid "MakerLab version" msgstr "" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "" msgid "metadata name list" msgstr "" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "" msgid "metadata value list" msgstr "" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "" msgid "Allow 3mf with newer version to be sliced" @@ -16364,7 +16358,7 @@ msgstr "" "Índice de la capa actual. Basado en uno (es decir, la primera capa es la " "número 1)." -msgid "Layer z" +msgid "Layer Z" msgstr "Z de capa" msgid "" @@ -16374,7 +16368,7 @@ msgstr "" "Altura de la capa actual sobre la cama de impresión, medida hasta la parte " "superior de la capa." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "Z máxima de capa" msgid "Height of the last layer above the print bed." @@ -17851,8 +17845,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -19105,16 +19099,6 @@ msgstr "" #~ msgid "Enable this option to use classic mode." #~ msgstr "Activar esta opción para usar el modo clásico" -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "La geometría se verá diezmada antes de detectar angulos agudos. Este " -#~ "parámetro indica la longitud mínima de desviación para el diezmado\n" -#~ "0 para desactivar" - #~ msgid "Compatible machine" #~ msgstr "Máquina compatible" @@ -19127,21 +19111,12 @@ msgstr "" #~ msgid "Default filament color" #~ msgstr "Color de filamento por defecto" -#~ msgid "mm³/s" -#~ msgstr "mm³/s" - -#~ msgid "g/cm³" -#~ msgstr "g/cm³" - #~ msgid "Rotate solid infill direction" #~ msgstr "Rotar la dirección del relleno sólido" #~ msgid "Rotate the solid infill direction by 90° for each layer." #~ msgstr "Rotar 90° la dirección del relleno sólido en cada capa." -#~ msgid "Print speed of ironing lines." -#~ msgstr "Velocidad de impresión de las líneas de alisado." - #~ msgid "" #~ "Flow Compensation Model, used to adjust the flow for small infill areas. " #~ "The model is expressed as a comma separated pair of values for extrusion " @@ -20069,13 +20044,6 @@ msgstr "" #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" #~ msgstr "Por favor, introduzca un valor válido (K en 0~0.3, N en 0.6~2.0)" -#~ msgid "Select connected printetrs (0/6)" -#~ msgstr "Seleccionar impresoras conectadas (0/6)" - -#, c-format, boost-format -#~ msgid "Select Connected Printetrs (%d/6)" -#~ msgstr "Seleccionar impresoras conectadas (%d/6)" - #~ msgid "PrintingPause" #~ msgstr "Impresión Pausada" @@ -21319,10 +21287,10 @@ msgstr "" #~ msgid "" #~ "Too large layer height.\n" -#~ "Reset to 0.2" +#~ "Reset to 0.2." #~ msgstr "" #~ "Altura de la capa demasiado grande.\n" -#~ "Reajustar a 0,2" +#~ "Reajustar a 0,2." #~ msgid "" #~ "\n" diff --git a/localization/i18n/fr/OrcaSlicer_fr.po b/localization/i18n/fr/OrcaSlicer_fr.po index c2d27a715d..88cfbe4f7e 100644 --- a/localization/i18n/fr/OrcaSlicer_fr.po +++ b/localization/i18n/fr/OrcaSlicer_fr.po @@ -3119,10 +3119,10 @@ msgstr "Étape" msgid "AMS Slots" msgstr "Emplacements AMS" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3793,7 +3793,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Vitesse volumétrique maximale trop faible.\n" "La valeur a été réinitialisée à 0,5" @@ -3810,12 +3810,12 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "Hauteur de couche trop petite. Réinitialiser à 0,2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "Espacement de lissage trop petit. Réinitialiser à 0.1" msgid "" @@ -3916,8 +3916,8 @@ msgstr "" "Remise à 0." msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4506,7 +4506,7 @@ msgstr "Séquence" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4617,9 +4617,6 @@ msgstr "Vue en coupe" msgid "Assemble Control" msgstr "Contrôle de l'Assemblage" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5425,11 +5422,6 @@ msgstr "Recharger la liste des fichiers de l’imprimante." msgid "No printers." msgstr "Aucune imprimante." -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "Chargement de la liste des fichiers…" @@ -9503,10 +9495,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -10234,7 +10226,7 @@ msgstr "Hauteur imprimable maximale limitée par le mécanisme de l'imprimante" msgid "Preferred orientation" msgstr "Orientation préférée" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "" "Orienter automatiquement les stls sur l’axe Z lors de l’importation initiale" @@ -11091,9 +11083,12 @@ msgstr "Rayon de détection de la bordure à oreilles" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" +"La géométrie sera décimée avant de détecter les angles vifs. Ce paramètre " +"indique la longueur minimale de l’écart pour la décimation.\n" +"0 pour désactiver" msgid "Select printers" msgstr "" @@ -12023,7 +12018,7 @@ msgid "Default color" msgstr "Couleur par défaut" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -12626,7 +12621,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -12827,7 +12822,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -13243,9 +13238,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -13254,9 +13249,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -13283,11 +13278,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -13523,8 +13518,8 @@ msgstr "" msgid "Ironing speed" msgstr "Vitesse de lissage" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "Vitesse d'impression des lignes de lissage." msgid "Ironing angle" msgstr "Angle de lissage" @@ -13669,8 +13664,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -13871,7 +13865,7 @@ msgstr "" "maintenir le temps de couche minimal défini ci-dessus lorsque le " "ralentissement pour un meilleur refroidissement de la couche est activé." -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Diamètre de la buse" msgid "Configuration notes" @@ -14034,7 +14028,7 @@ msgstr "" "utilisez une vitesse différente pour imprimer. Pour un surplomb de 100%% la " "vitesse du pont est utilisée." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "Filament pour imprimer les parois" msgid "" @@ -14090,7 +14084,7 @@ msgstr "" msgid "Printer type" msgstr "Type d’imprimante" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "Type de l’imprimante" msgid "Printer notes" @@ -14595,7 +14589,7 @@ msgstr "" msgid "Skirt distance" msgstr "Distance de la jupe" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Distance de la jupe au bord ou à l'objet" msgid "Skirt start point" @@ -14723,7 +14717,7 @@ msgstr "" msgid "Solid infill" msgstr "Remplissage solide" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "Filament pour l’impression de remplissage solide" msgid "" @@ -15636,7 +15630,7 @@ msgstr "Largeur de la tour d’amorçage" msgid "Wipe tower rotation angle" msgstr "Angle de rotation de la tour d’essuyage" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Angle de rotation de la tour d’essuyage par rapport à l’axe X." msgid "Width of the brim." @@ -15716,7 +15710,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -16365,7 +16359,7 @@ msgstr "Charger un G-code personnalisé" msgid "Load custom G-code from json." msgstr "Charger un G-code personnalisé à partir de json." -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "Chargement des identifiants de filaments" msgid "Load filament IDs for each object." @@ -16408,25 +16402,25 @@ msgstr "" msgid "MakerLab name" msgstr "Nom dans MakerLab" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "Nom de MakerLab pour générer ce 3mf" msgid "MakerLab version" msgstr "Version de MakerLab" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "Version de MakerLab pour générer ce 3mf" msgid "metadata name list" msgstr "liste de noms de métadonnées" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "liste de noms de métadonnées ajoutée dans le 3mf" msgid "metadata value list" msgstr "liste des valeurs des métadonnées" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "liste des valeurs de métadonnées ajoutée au 3mf" msgid "Allow 3mf with newer version to be sliced" @@ -16722,7 +16716,7 @@ msgstr "" "Indice de la couche actuelle. Base unitaire (c’est-à-dire que la première " "couche porte le numéro 1)." -msgid "Layer z" +msgid "Layer Z" msgstr "Couche z" msgid "" @@ -16732,7 +16726,7 @@ msgstr "" "Hauteur de la couche actuelle au-dessus du plateau d’impression, mesurée " "jusqu’au sommet de la couche." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "Couche maximale z" msgid "Height of the last layer above the print bed." @@ -18220,8 +18214,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -19508,16 +19502,6 @@ msgstr "" #~ msgid "Enable this option to use classic mode." #~ msgstr "Activer cette option pour utiliser le mode classique" -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "La géométrie sera décimée avant de détecter les angles vifs. Ce paramètre " -#~ "indique la longueur minimale de l’écart pour la décimation.\n" -#~ "0 pour désactiver" - #~ msgid "Compatible machine" #~ msgstr "Appareils compatibles" @@ -19530,12 +19514,6 @@ msgstr "" #~ msgid "Default filament color" #~ msgstr "Couleur du filament par défaut" -#~ msgid "mm³/s" -#~ msgstr "mm³/s" - -#~ msgid "g/cm³" -#~ msgstr "g/cm³" - #~ msgid "Rotate solid infill direction" #~ msgstr "Faire pivoter la direction du remplissage solide" @@ -19544,9 +19522,6 @@ msgstr "" #~ "Faire pivoter la direction du remplissage solide de 90° pour chaque " #~ "couche." -#~ msgid "Print speed of ironing lines." -#~ msgstr "Vitesse d'impression des lignes de lissage." - #~ msgid "" #~ "Flow Compensation Model, used to adjust the flow for small infill areas. " #~ "The model is expressed as a comma separated pair of values for extrusion " @@ -19652,7 +19627,7 @@ msgstr "" #~ msgid "Downward machines settings" #~ msgstr "réglages des machines descendantes" -#~ msgid "Load filament ids for each object" +#~ msgid "Load filament IDs for each object" #~ msgstr "Chargement des identifiants de filaments pour chaque objet" #~ msgid "" @@ -20572,13 +20547,6 @@ msgstr "" #~ msgstr "" #~ "Veuillez saisir une valeur valide (K entre 0 et 0,3, N entre 0,6 et 2,0)." -#~ msgid "Select connected printetrs (0/6)" -#~ msgstr "Sélectionner les imprimantes connectées (0/6)" - -#, c-format, boost-format -#~ msgid "Select Connected Printetrs (%d/6)" -#~ msgstr "Sélectionner les imprimantes connectées (%d/6)" - #~ msgid "PrintingPause" #~ msgstr "Pause de l’impression" diff --git a/localization/i18n/hu/OrcaSlicer_hu.po b/localization/i18n/hu/OrcaSlicer_hu.po index 24945d0925..f97e36f5df 100644 --- a/localization/i18n/hu/OrcaSlicer_hu.po +++ b/localization/i18n/hu/OrcaSlicer_hu.po @@ -3003,10 +3003,10 @@ msgstr "Lépés" msgid "AMS Slots" msgstr "AMS férőhelyek" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3639,7 +3639,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Túl alacsony max. volumetrikus sebesség.\n" "Az értéke 0,5-re állt vissza" @@ -3653,14 +3653,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Túl alacsony rétegmagasság.\n" "Visszaállítva 0,2-re" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Túl kicsi vasalási térköz.\n" "Visszaállítva 0,1-re" @@ -3756,8 +3756,8 @@ msgid "" msgstr "" msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4328,7 +4328,7 @@ msgstr "Sorrend" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4439,9 +4439,6 @@ msgstr "Keresztmetszet nézet" msgid "Assemble Control" msgstr "Összeállítás" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5220,11 +5217,6 @@ msgstr "" msgid "No printers." msgstr "" -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "" @@ -9024,10 +9016,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -9679,7 +9671,7 @@ msgstr "" msgid "Preferred orientation" msgstr "" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "" msgid "Printer preset names" @@ -10330,7 +10322,7 @@ msgstr "" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" @@ -11015,7 +11007,7 @@ msgid "Default color" msgstr "Alapértelmezett szín" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -11527,7 +11519,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -11699,7 +11691,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -12053,9 +12045,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -12064,9 +12056,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -12093,11 +12085,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -12284,8 +12276,8 @@ msgstr "" msgid "Ironing speed" msgstr "Vasalás sebessége" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "A vasalási vonalak nyomtatási sebessége" msgid "Ironing angle" msgstr "" @@ -12423,8 +12415,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -12571,7 +12562,7 @@ msgid "" "is enabled." msgstr "" -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Fúvóka átmérője" msgid "Configuration notes" @@ -12716,7 +12707,7 @@ msgstr "" "más sebességet használ. A 100%%-os túlnyúlás esetén az áthidaláshoz " "beállított sebességet használja." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "" msgid "" @@ -12755,7 +12746,7 @@ msgstr "" msgid "Printer type" msgstr "Nyomtató típusa" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "" msgid "Printer notes" @@ -13183,7 +13174,7 @@ msgstr "" msgid "Skirt distance" msgstr "Szoknya távolsága" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "A szoknyától a peremig vagy tárgyig mért távolság" msgid "Skirt start point" @@ -13291,7 +13282,7 @@ msgstr "" msgid "Solid infill" msgstr "Tömör kitöltés" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "" msgid "" @@ -14088,7 +14079,7 @@ msgstr "Ez a törlő torony szélessége." msgid "Wipe tower rotation angle" msgstr "Törlőtorony forgatási szöge" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Törlőtorony forgatási szöge az x-tengelyhez képest." msgid "Width of the brim." @@ -14144,7 +14135,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -14723,7 +14714,7 @@ msgstr "" msgid "Load custom G-code from json." msgstr "" -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "" msgid "Load filament IDs for each object." @@ -14758,25 +14749,25 @@ msgstr "" msgid "MakerLab name" msgstr "" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "" msgid "MakerLab version" msgstr "" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "" msgid "metadata name list" msgstr "" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "" msgid "metadata value list" msgstr "" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "" msgid "Allow 3mf with newer version to be sliced" @@ -15024,7 +15015,7 @@ msgstr "" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" -msgid "Layer z" +msgid "Layer Z" msgstr "" msgid "" @@ -15032,7 +15023,7 @@ msgid "" "layer." msgstr "" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "" msgid "Height of the last layer above the print bed." @@ -16379,8 +16370,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -17480,15 +17471,6 @@ msgstr "" #~ msgid "Default filament color" #~ msgstr "Alapértelmezett filament szín" -#~ msgid "mm³/s" -#~ msgstr "mm³/s" - -#~ msgid "g/cm³" -#~ msgstr "g/cm³" - -#~ msgid "Print speed of ironing lines." -#~ msgstr "A vasalási vonalak nyomtatási sebessége" - #~ msgid "" #~ "The highest printable layer height for the extruder. Used to limit the " #~ "maximum layer height when adaptive layer height is enabled." diff --git a/localization/i18n/it/OrcaSlicer_it.po b/localization/i18n/it/OrcaSlicer_it.po index 950c1e51ba..882f52a2c1 100644 --- a/localization/i18n/it/OrcaSlicer_it.po +++ b/localization/i18n/it/OrcaSlicer_it.po @@ -3117,10 +3117,10 @@ msgstr "Passo" msgid "AMS Slots" msgstr "Slot AMS" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3785,7 +3785,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Velocità volumetrica massima troppo bassa.\n" "Il valore è stato ripristinato a 0,5" @@ -3802,14 +3802,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Altezza delo strato troppo piccola.\n" "È stata ripristinata a 0,2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Spaziatura di stiratura troppo piccola.\n" "È stata ripristinata a 0,1" @@ -3916,8 +3916,8 @@ msgstr "" "È stato ripristinato a 0." msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4504,7 +4504,7 @@ msgstr "Sequenza" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4615,9 +4615,6 @@ msgstr "Vista della sezione" msgid "Assemble Control" msgstr "Controllo assemblaggio" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5409,11 +5406,6 @@ msgstr "Ricarica l'elenco dei file dalla stampante." msgid "No printers." msgstr "Nessuna stampante." -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "Caricamento elenco file..." @@ -9432,10 +9424,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -10162,7 +10154,7 @@ msgstr "" msgid "Preferred orientation" msgstr "Orientamento preferito" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "" "Orienta automaticamente gli STL sull'asse Z al momento dell'importazione " "iniziale." @@ -11015,9 +11007,12 @@ msgstr "Raggio di rilevamento tesa ad orecchio" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" +"La geometria verrà decimata prima di rilevare gli spigoli vivi. Questo " +"parametro indica la lunghezza minima dello scostamento per la decimazione.\n" +"0 per disattivare." msgid "Select printers" msgstr "" @@ -11938,7 +11933,7 @@ msgid "Default color" msgstr "Colore predefinito" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -12540,7 +12535,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -12742,7 +12737,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -13158,9 +13153,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -13169,9 +13164,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -13198,11 +13193,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -13438,8 +13433,8 @@ msgstr "" msgid "Ironing speed" msgstr "Velocità stiratura" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "Indica la velocità di stampa per le linee di stiratura." msgid "Ironing angle" msgstr "Angolo di stiratura" @@ -13582,8 +13577,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -13785,7 +13779,7 @@ msgstr "" "durata minima stimata dello strato definito sopra, quando è abilitata " "l'opzione 'Rallenta stampa per miglior raffreddamento degli strati'." -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Diametro ugello" msgid "Configuration notes" @@ -13947,7 +13941,7 @@ msgstr "" "utilizza un velocità di stampa differente. Per una sporgenza del 100%%, " "viene utilizzata la velocità dei ponti." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "Filamento per stampa pareti" msgid "" @@ -14003,7 +13997,7 @@ msgstr "" msgid "Printer type" msgstr "Tipo stampante" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "Tipo di stampante" msgid "Printer notes" @@ -14511,7 +14505,7 @@ msgstr "" msgid "Skirt distance" msgstr "Distanza gonna" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Distanza dalla gonna alla tesa o all'oggetto" msgid "Skirt start point" @@ -14639,7 +14633,7 @@ msgstr "" msgid "Solid infill" msgstr "Riempimento solido" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "Filamento utilizzato per stampare il riempimento solido" msgid "" @@ -15554,7 +15548,7 @@ msgstr "Larghezza della torre di spurgo." msgid "Wipe tower rotation angle" msgstr "Angolo di rotazione della torre di spurgo" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Angolo di rotazione della torre di spurgo rispetto all'asse X." msgid "Width of the brim." @@ -15632,7 +15626,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -16274,7 +16268,7 @@ msgstr "Carica G-code personalizzato" msgid "Load custom G-code from json." msgstr "Carica G-code personalizzato da json." -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "Carica ID dei filamenti" msgid "Load filament IDs for each object." @@ -16315,25 +16309,25 @@ msgstr "" msgid "MakerLab name" msgstr "Nome MakerLab" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "Nome MakerLab per generare questo 3mf" msgid "MakerLab version" msgstr "Versione MakerLab" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "Versione MakerLab per generare questo 3mf" msgid "metadata name list" msgstr "elenco nomi metadati" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "elenco dei nomi dei metadati aggiunti nel 3mf" msgid "metadata value list" msgstr "elenco valori metadati" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "elenco dei valori dei metadati aggiunti nel 3mf" msgid "Allow 3mf with newer version to be sliced" @@ -16631,7 +16625,7 @@ msgstr "" "Indice dello strato attuale. Basato su uno (cioè il primo livello è il " "numero 1)." -msgid "Layer z" +msgid "Layer Z" msgstr "Strato Z" msgid "" @@ -16641,7 +16635,7 @@ msgstr "" "Altezza dello strato attuale sopra il piano di stampa, misurata fino alla " "parte superiore dello strato." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "Massimale strato Z" msgid "Height of the last layer above the print bed." @@ -18128,8 +18122,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -19404,17 +19398,6 @@ msgstr "" #~ msgid "Enable this option to use classic mode." #~ msgstr "Abilita questa opzione per utilizzare la modalità classica." -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "La geometria verrà decimata prima di rilevare gli spigoli vivi. Questo " -#~ "parametro indica la lunghezza minima dello scostamento per la " -#~ "decimazione.\n" -#~ "0 per disattivare." - #~ msgid "Compatible machine" #~ msgstr "Macchina compatibile" @@ -19427,21 +19410,12 @@ msgstr "" #~ msgid "Default filament color" #~ msgstr "Colore predefinito del filamento" -#~ msgid "mm³/s" -#~ msgstr "mm³/s" - -#~ msgid "g/cm³" -#~ msgstr "g/cm³" - #~ msgid "Rotate solid infill direction" #~ msgstr "Ruota direzione riempimento solido" #~ msgid "Rotate the solid infill direction by 90° for each layer." #~ msgstr "Ruota la direzione del riempimento solido di 90° per ogni strato." -#~ msgid "Print speed of ironing lines." -#~ msgstr "Indica la velocità di stampa per le linee di stiratura." - #~ msgid "" #~ "Flow Compensation Model, used to adjust the flow for small infill areas. " #~ "The model is expressed as a comma separated pair of values for extrusion " @@ -19547,7 +19521,7 @@ msgstr "" #~ msgid "Downward machines settings" #~ msgstr "Impostazioni macchine" -#~ msgid "Load filament ids for each object" +#~ msgid "Load filament IDs for each object" #~ msgstr "Carica gli ID dei filamenti per ogni oggetto" #~ msgid "" diff --git a/localization/i18n/ja/OrcaSlicer_ja.po b/localization/i18n/ja/OrcaSlicer_ja.po index 737546b5de..ced5819a79 100644 --- a/localization/i18n/ja/OrcaSlicer_ja.po +++ b/localization/i18n/ja/OrcaSlicer_ja.po @@ -2982,10 +2982,10 @@ msgstr "手順" msgid "AMS Slots" msgstr "AMSスロット" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3590,7 +3590,7 @@ msgstr "このフィラメントで推奨ノズル温度は %d ~ %d ℃です。 msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "値が小さすぎます、0.5に戻します" #, c-format, boost-format @@ -3602,12 +3602,12 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "積層ピッチが小さすぎます、0.2にリセットされました" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "値が小さいです、0.1にリセットします" msgid "" @@ -3695,8 +3695,8 @@ msgid "" msgstr "" msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4258,7 +4258,7 @@ msgstr "順番" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4369,9 +4369,6 @@ msgstr "断面" msgid "Assemble Control" msgstr "組立て" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5131,11 +5128,6 @@ msgstr "" msgid "No printers." msgstr "プリンタなし" -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "ファイルリストを読込み中" @@ -8810,10 +8802,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -9459,7 +9451,7 @@ msgstr "造形可能の最大高さです。" msgid "Preferred orientation" msgstr "" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "" msgid "Printer preset names" @@ -10085,7 +10077,7 @@ msgstr "" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" @@ -10745,7 +10737,7 @@ msgid "Default color" msgstr "デフォルト色" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -11256,7 +11248,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -11423,7 +11415,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -11772,9 +11764,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -11783,9 +11775,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -11812,11 +11804,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -12013,8 +12005,8 @@ msgstr "" msgid "Ironing speed" msgstr "アイロン時の移動速度" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "アイロン時の造形速度です。" msgid "Ironing angle" msgstr "" @@ -12148,8 +12140,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -12294,7 +12285,7 @@ msgid "" "is enabled." msgstr "" -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "ノズル直径" msgid "Configuration notes" @@ -12433,7 +12424,7 @@ msgstr "" "この設定により、線幅に対するオーバーハングの割合を検出し、異なる速度で造形し" "ます。100%%のオーバーハングの場合、ブリッジの速度が使用されます。" -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "" msgid "" @@ -12472,7 +12463,7 @@ msgstr "" msgid "Printer type" msgstr "プリンタータイプ" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "" msgid "Printer notes" @@ -12892,7 +12883,7 @@ msgstr "" msgid "Skirt distance" msgstr "スカート距離" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "スカートからブリム或はオブジェクトまでの距離です。" msgid "Skirt start point" @@ -12992,7 +12983,7 @@ msgstr "" msgid "Solid infill" msgstr "ソリッドインフィル" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "" msgid "" @@ -13754,7 +13745,7 @@ msgstr "プライムタワーの幅です。" msgid "Wipe tower rotation angle" msgstr "ワイプタワーの回転角" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "x軸に対するワイプタワーの回転角度。" msgid "Width of the brim." @@ -13812,7 +13803,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -14368,7 +14359,7 @@ msgstr "" msgid "Load custom G-code from json." msgstr "" -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "" msgid "Load filament IDs for each object." @@ -14403,25 +14394,25 @@ msgstr "" msgid "MakerLab name" msgstr "" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "" msgid "MakerLab version" msgstr "" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "" msgid "metadata name list" msgstr "" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "" msgid "metadata value list" msgstr "" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "" msgid "Allow 3mf with newer version to be sliced" @@ -14696,7 +14687,7 @@ msgstr "レイヤーナンバー" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" -msgid "Layer z" +msgid "Layer Z" msgstr "" msgid "" @@ -14704,7 +14695,7 @@ msgid "" "layer." msgstr "プリント ベッド上の現在のレイヤーの高さ (レイヤーの最上部までの計測)。" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "" msgid "Height of the last layer above the print bed." @@ -15991,8 +15982,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -17023,15 +17014,6 @@ msgstr "" #~ msgid "Default filament color" #~ msgstr "フィラメントのデフォルト色" -#~ msgid "mm³/s" -#~ msgstr "mm³/s" - -#~ msgid "g/cm³" -#~ msgstr "g/cm³" - -#~ msgid "Print speed of ironing lines." -#~ msgstr "アイロン時の造形速度です。" - #~ msgid "" #~ "The highest printable layer height for the extruder. Used to limit the " #~ "maximum layer height when adaptive layer height is enabled." diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po index 03c33402f0..7b139d5262 100644 --- a/localization/i18n/ko/OrcaSlicer_ko.po +++ b/localization/i18n/ko/OrcaSlicer_ko.po @@ -3026,10 +3026,10 @@ msgstr "단계" msgid "AMS Slots" msgstr "AMS 슬롯" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3654,7 +3654,7 @@ msgstr "이 필라멘트 유형의 권장 노즐 온도는 [%d, %d]°C입니다" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "최대 압출 속도가 너무 작습니다.\n" "0.5로 재설정" @@ -3670,14 +3670,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "레이어 높이가 너무 작습니다.\n" "0.2로 재설정" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "다림질 간격이 너무 작습니다.\n" "0.1로 재설정" @@ -3777,8 +3777,8 @@ msgstr "" "0으로 재설정합니다." msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4354,7 +4354,7 @@ msgstr "순서" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4465,9 +4465,6 @@ msgstr "단면도" msgid "Assemble Control" msgstr "조립 제어" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5242,11 +5239,6 @@ msgstr "프린터에서 파일 목록을 다시 로드합니다." msgid "No printers." msgstr "프린터 없음." -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "파일 목록 로드 중..." @@ -9100,10 +9092,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -9778,7 +9770,7 @@ msgstr "프린터 기계장치에 의해 제한되는 출력 가능한 최대 msgid "Preferred orientation" msgstr "선호하는 방향" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "최초 임포트 시 Z축에서 자동으로 스톨 방향 지정" msgid "Printer preset names" @@ -10548,9 +10540,12 @@ msgstr "브림 귀 감지 반경" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" +"날카로운 각도를 감지하기 전에 형상이 무시됩니다. 이 매개변수는 무시하는 형" +"상의 최소 길이를 나타냅니다.\n" +"0으로 비활성화합니다" msgid "Select printers" msgstr "" @@ -11386,7 +11381,7 @@ msgid "Default color" msgstr "기본 색상" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -11947,7 +11942,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -12132,7 +12127,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -12529,9 +12524,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -12540,9 +12535,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -12569,11 +12564,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -12791,8 +12786,8 @@ msgstr "" msgid "Ironing speed" msgstr "다림질 속도" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "다림질 선의 출력 속도" msgid "Ironing angle" msgstr "다림질 각도" @@ -12930,8 +12925,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -13120,7 +13114,7 @@ msgstr "" "레이어 냉각을 위한 감속이 활성화된 경우 위에 정의된 최소 레이어 시간을 유지하" "기 위해 프린터가 감속하는 최소 출력 속도입니다." -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "노즐 직경" msgid "Configuration notes" @@ -13264,7 +13258,7 @@ msgstr "" "선 너비에 비례하여 오버행 백분율을 감지하고 다른 속도를 사용하여 출력합니다. " "100%% 오버행의 경우 브릿지 속도가 사용됩니다." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "벽을 출력하는 필라멘트" msgid "" @@ -13314,7 +13308,7 @@ msgstr "" msgid "Printer type" msgstr "프린터 유형" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "프린터 유형" msgid "Printer notes" @@ -13789,7 +13783,7 @@ msgstr "" msgid "Skirt distance" msgstr "스커트 거리" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "스커트와 브림 또는 객체와의 거리" msgid "Skirt start point" @@ -13908,7 +13902,7 @@ msgstr "임계값보다 작은 드문 채우기 영역은 꽉찬 내부 채우 msgid "Solid infill" msgstr "솔리드 채우기" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "솔리드 인필을 출력하는 필라멘트" msgid "" @@ -14747,7 +14741,7 @@ msgstr "프라임 타워의 너비" msgid "Wipe tower rotation angle" msgstr "프라임 타워 회전 각도" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "X축 기준의 프라임 타워 회전 각도." msgid "Width of the brim." @@ -14820,7 +14814,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -15425,7 +15419,7 @@ msgstr "사용자 정의 Gcode 불러오기" msgid "Load custom G-code from json." msgstr "사용자 정의 Gcode를 json에서 불러오기." -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "필라멘트 ID 불러오기" msgid "Load filament IDs for each object." @@ -15462,25 +15456,25 @@ msgstr "프린터 또는 필라멘트 사전 설정에서 3mf의 수정된 Gcode msgid "MakerLab name" msgstr "메이커 랩 이름" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "이 3mf를 생성하는 메이커랩 이름" msgid "MakerLab version" msgstr "메이커 랩 버전" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "이 3mf를 생성하기 위한 메이커랩 버전" msgid "metadata name list" msgstr "메타데이터 이름 목록" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "3mf에 메타데이터 이름 목록 추가됨" msgid "metadata value list" msgstr "메타데이터 값 목록" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "메타데이터 값 목록이 3MF에 추가됨" msgid "Allow 3mf with newer version to be sliced" @@ -15746,7 +15740,7 @@ msgstr "레이어 번호" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "현재 레이어의 인덱스입니다. 1 기반(즉, 첫 번째 레이어가 1번입니다)." -msgid "Layer z" +msgid "Layer Z" msgstr "레이어 z" msgid "" @@ -15754,7 +15748,7 @@ msgid "" "layer." msgstr "레이어 상단까지 측정된 출력 베드 위의 현재 레이어 높이입니다." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "최대 레이어 z" msgid "Height of the last layer above the print bed." @@ -17159,8 +17153,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -18407,16 +18401,6 @@ msgstr "" #~ "가 100% 돌출되어 있고 아래에서 이를 지지하는 벽이 없으면 100% 돌출 속도가 " #~ "적용됩니다." -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "날카로운 각도를 감지하기 전에 형상이 무시됩니다. 이 매개변수는 무시하는 형" -#~ "상의 최소 길이를 나타냅니다.\n" -#~ "0으로 비활성화합니다" - #~ msgid "Compatible machine" #~ msgstr "호환 장치" @@ -18429,21 +18413,12 @@ msgstr "" #~ msgid "Default filament color" #~ msgstr "기본 필라멘트 색상" -#~ msgid "mm³/s" -#~ msgstr "mm³/s" - -#~ msgid "g/cm³" -#~ msgstr "g/cm³" - #~ msgid "Rotate solid infill direction" #~ msgstr "솔리드 채우기 방향 회전" #~ msgid "Rotate the solid infill direction by 90° for each layer." #~ msgstr "각 레이어에 대해 솔리드 채우기 방향을 90° 회전합니다." -#~ msgid "Print speed of ironing lines." -#~ msgstr "다림질 선의 출력 속도" - #~ msgid "" #~ "Flow Compensation Model, used to adjust the flow for small infill areas. " #~ "The model is expressed as a comma separated pair of values for extrusion " @@ -18552,7 +18527,7 @@ msgstr "" #~ msgid "Downward machines settings" #~ msgstr "하향 머신 설정" -#~ msgid "Load filament ids for each object" +#~ msgid "Load filament IDs for each object" #~ msgstr "각 객체에 대한 필라멘트 ID 로드" #~ msgid "" @@ -19269,13 +19244,6 @@ msgstr "" #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" #~ msgstr "유효한 값을 입력하세요(K는 0~0.3, N은 0.6~2.0)" -#~ msgid "Select connected printetrs (0/6)" -#~ msgstr "연결된 프린터 선택(0/6)" - -#, c-format, boost-format -#~ msgid "Select Connected Printetrs (%d/6)" -#~ msgstr "연결된 프린터 (%d/6)를 선택합니다" - #~ msgid "PrintingPause" #~ msgstr "인쇄 일시 중지" diff --git a/localization/i18n/lt/OrcaSlicer_lt.po b/localization/i18n/lt/OrcaSlicer_lt.po index 51c40b8b6d..74e55141bf 100644 --- a/localization/i18n/lt/OrcaSlicer_lt.po +++ b/localization/i18n/lt/OrcaSlicer_lt.po @@ -3089,10 +3089,10 @@ msgstr "Žingsnis" msgid "AMS Slots" msgstr "AMS angos" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3740,7 +3740,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Per mažas maksimalus tūrinis greitis.\n" "Atstatyta į 0,5" @@ -3757,14 +3757,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Per mažas sluoksnio aukštis.\n" "Atstatyta į 0,2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Per mažas lyginimo tarpas.\n" "Atstatyta į 0,1" @@ -3870,8 +3870,8 @@ msgstr "" "Atstatoma į 0." msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4451,7 +4451,7 @@ msgstr "Seka" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4562,9 +4562,6 @@ msgstr "Sekcijos peržiūra" msgid "Assemble Control" msgstr "Surinkimo valdymas" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5358,11 +5355,6 @@ msgstr "Iš naujo iš spausdintuvo įkelti failų sąrašą." msgid "No printers." msgstr "Bėra spausdintuvų." -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "Įkeliamas failų sąrašas..." @@ -9341,10 +9333,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -10051,7 +10043,7 @@ msgstr "" msgid "Preferred orientation" msgstr "Pageidautina orientacija" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "Automatiškai orientuoti stl failus pagal Z ašį pradinio importo metu" msgid "Printer preset names" @@ -10877,9 +10869,12 @@ msgstr "Kraštų ausies aptikimo spindulys" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" +"Prieš aptikdami aštrius kampus, geometrija bus išskaidyta. Šis parametras " +"nurodo mažiausią nuokrypio ilgį decimavimui.\n" +"0 - išjungti" msgid "Select printers" msgstr "" @@ -11755,7 +11750,7 @@ msgid "Default color" msgstr "Numatytoji spalva" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -12334,7 +12329,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -12532,7 +12527,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -12940,9 +12935,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -12951,9 +12946,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -12980,11 +12975,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -13214,8 +13209,8 @@ msgstr "" msgid "Ironing speed" msgstr "Lyginimo greitis" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "Lyginimo linijų spausdinimo greitis" msgid "Ironing angle" msgstr "Lyginimo kampas" @@ -13353,8 +13348,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -13541,7 +13535,7 @@ msgstr "" "išlaikytų pirmiau apibrėžtą minimalų sluoksnio laiką, kai įjungtas " "sulėtinimas dėl geresnio sluoksnių aušinimo." -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Purkštuvo skersmuo" msgid "Configuration notes" @@ -13694,7 +13688,7 @@ msgstr "" "naudokite skirtingą spausdinimo greitį. Jei iškyša 100 %%, naudojamas tilto " "greitis." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "Gijos sienoms spausdinti" msgid "" @@ -13749,7 +13743,7 @@ msgstr "" msgid "Printer type" msgstr "Spausdintuvo tipas" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "Spausdintuvo tipas" msgid "Printer notes" @@ -14227,7 +14221,7 @@ msgstr "" msgid "Skirt distance" msgstr "Apvado atstumas" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Tai atstumas nuo apvado iki krašto arba objekto" msgid "Skirt start point" @@ -14348,7 +14342,7 @@ msgstr "" msgid "Solid infill" msgstr "Vientisas užpildas" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "Filamentas vientisam užpildui spausdinti" msgid "" @@ -15236,7 +15230,7 @@ msgstr "Pagrindinio bokšto plotis" msgid "Wipe tower rotation angle" msgstr "Valymo bokšto sukimosi kampas" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Valymo bokšto sukimosi kampas x ašies atžvilgiu." msgid "Width of the brim." @@ -15313,7 +15307,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -15942,7 +15936,7 @@ msgstr "Įkelti pasirinktinį G-kodą" msgid "Load custom G-code from json." msgstr "" -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "Įkelti gijų ID" msgid "Load filament IDs for each object." @@ -15978,25 +15972,25 @@ msgstr "" msgid "MakerLab name" msgstr "MakerLab pavadinimas" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "„MakerLab“ pavadinimas šiam 3mf generuoti" msgid "MakerLab version" msgstr "„MakerLab“ versija" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "„MakerLab“ versija šiam 3mf generuoti" msgid "metadata name list" msgstr "metaduomenų pavadinimų sąrašas" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "metaduomenų pavadinimų sąrašas įtrauktas į 3mf" msgid "metadata value list" msgstr "metaduomenų reikšmių sąrašas" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "į 3mf įtrauktas metaduomenų reikšmių sąrašas" msgid "Allow 3mf with newer version to be sliced" @@ -16280,7 +16274,7 @@ msgstr "Sluoksnio numeris" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "Dabartinio sluoksnio indeksas (pirmasis sluoksnis turi numerį 1)." -msgid "Layer z" +msgid "Layer Z" msgstr "Sluoksnis z" msgid "" @@ -16290,7 +16284,7 @@ msgstr "" "Dabartinio sluoksnio aukštis virš spausdinimo pagrindo, matuojamas iki " "sluoksnio viršaus." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "Maksimalusis sluoksnis z" msgid "Height of the last layer above the print bed." @@ -17737,8 +17731,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -19031,16 +19025,6 @@ msgstr "" #~ msgid "Enable this option to use classic mode." #~ msgstr "Įjunkite šią parinktį, jei norite naudoti klasikinį režimą" -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "Prieš aptikdami aštrius kampus, geometrija bus išskaidyta. Šis parametras " -#~ "nurodo mažiausią nuokrypio ilgį decimavimui.\n" -#~ "0 - išjungti" - #~ msgid "Compatible machine" #~ msgstr "Suderinamas įrenginys" @@ -19132,9 +19116,6 @@ msgstr "" #~ msgstr "" #~ "Įjunkite šią parinktį, jei norite į G-kodą įtraukti komandą EXCLUDE OBJECT" -#~ msgid "Print speed of ironing lines." -#~ msgstr "Lyginimo linijų spausdinimo greitis" - #~ msgid "This G-code part is inserted at every layer change after lift z" #~ msgstr "" #~ "Šis G-kodas įterpiamas kiekvieną kartą keičiant sluoksnį po z pakėlimo" @@ -19334,7 +19315,7 @@ msgstr "" #~ msgid "Load custom G-code from json" #~ msgstr "Įkelti pasirinktinį G-kodą iš json" -#~ msgid "Load filament ids for each object" +#~ msgid "Load filament IDs for each object" #~ msgstr "Įkelti kiekvieno objekto gijų ID" #~ msgid "Skip the modified G-code in 3mf from Printer or filament Presets" diff --git a/localization/i18n/nl/OrcaSlicer_nl.po b/localization/i18n/nl/OrcaSlicer_nl.po index bf5e9a64b4..10adce1ad3 100644 --- a/localization/i18n/nl/OrcaSlicer_nl.po +++ b/localization/i18n/nl/OrcaSlicer_nl.po @@ -3038,10 +3038,10 @@ msgstr "Stap" msgid "AMS Slots" msgstr "AMS Slots" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3680,7 +3680,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Te kleine maximale volumetrische snelheid.\n" "De waarde is teruggezet naar 0,5" @@ -3697,14 +3697,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Laaghoogte is te klein\n" "Teruggezet naar 0.2mm" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "De ruimte voor het strijken is te klein\n" "Teruggezet naar 0.1" @@ -3802,8 +3802,8 @@ msgid "" msgstr "" msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4373,7 +4373,7 @@ msgstr "Reeks" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4484,9 +4484,6 @@ msgstr "Sectie weergave" msgid "Assemble Control" msgstr "Assemblage controle" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5264,11 +5261,6 @@ msgstr "" msgid "No printers." msgstr "Geen printers." -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "Bestandslijst laden..." @@ -9166,10 +9158,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -9840,7 +9832,7 @@ msgstr "" msgid "Preferred orientation" msgstr "Voorkeursoriëntatie" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "" msgid "Printer preset names" @@ -10494,7 +10486,7 @@ msgstr "" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" @@ -11183,7 +11175,7 @@ msgid "Default color" msgstr "Standaardkleur" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -11697,7 +11689,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -11875,7 +11867,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -12231,9 +12223,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -12242,9 +12234,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -12271,11 +12263,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -12465,8 +12457,8 @@ msgstr "" msgid "Ironing speed" msgstr "Snelheid tijdens het strijken" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "Dit is de print snelheid van de strijk lijnen" msgid "Ironing angle" msgstr "" @@ -12603,8 +12595,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -12752,7 +12743,7 @@ msgid "" "is enabled." msgstr "" -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Diameter van het mondstuk" msgid "Configuration notes" @@ -12902,7 +12893,7 @@ msgstr "" "lijnbreedte te detecteren en gebruikt verschillende snelheden om af te " "drukken. Voor 100%% overhang wordt de brugsnelheid gebruikt." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "" msgid "" @@ -12941,7 +12932,7 @@ msgstr "" msgid "Printer type" msgstr "Printertype" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "" msgid "Printer notes" @@ -13380,7 +13371,7 @@ msgstr "" msgid "Skirt distance" msgstr "Rand (skirt) afstand" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Dit is de afstand van de skirt tot de rand van het object." msgid "Skirt start point" @@ -13484,7 +13475,7 @@ msgstr "" msgid "Solid infill" msgstr "Dichte vulling" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "" msgid "" @@ -14291,7 +14282,7 @@ msgstr "Dit is de breedte van de prime toren." msgid "Wipe tower rotation angle" msgstr "Rotatie van het afveegblok" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Rotatie van het afveegblok ten opzichte van de X-as." msgid "Width of the brim." @@ -14347,7 +14338,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -14943,7 +14934,7 @@ msgstr "Laad aangepaste G-code" msgid "Load custom G-code from json." msgstr "Laad aangepaste G-code vanuit json." -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "" msgid "Load filament IDs for each object." @@ -14978,25 +14969,25 @@ msgstr "" msgid "MakerLab name" msgstr "" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "" msgid "MakerLab version" msgstr "" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "" msgid "metadata name list" msgstr "" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "" msgid "metadata value list" msgstr "" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "" msgid "Allow 3mf with newer version to be sliced" @@ -15244,7 +15235,7 @@ msgstr "" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" -msgid "Layer z" +msgid "Layer Z" msgstr "" msgid "" @@ -15252,7 +15243,7 @@ msgid "" "layer." msgstr "" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "" msgid "Height of the last layer above the print bed." @@ -16625,8 +16616,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -17786,15 +17777,6 @@ msgstr "" #~ msgid "Default filament color" #~ msgstr "Standaard filamentkleur" -#~ msgid "mm³/s" -#~ msgstr "mm³/s" - -#~ msgid "g/cm³" -#~ msgstr "g/cm³" - -#~ msgid "Print speed of ironing lines." -#~ msgstr "Dit is de print snelheid van de strijk lijnen" - #~ msgid "" #~ "The highest printable layer height for the extruder. Used to limit the " #~ "maximum layer height when adaptive layer height is enabled." diff --git a/localization/i18n/pl/OrcaSlicer_pl.po b/localization/i18n/pl/OrcaSlicer_pl.po index 38b6ec1a6d..78d566169d 100644 --- a/localization/i18n/pl/OrcaSlicer_pl.po +++ b/localization/i18n/pl/OrcaSlicer_pl.po @@ -3086,10 +3086,10 @@ msgstr "Krok" msgid "AMS Slots" msgstr "Gniazda AMS" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3748,7 +3748,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Zbyt mała maksymalna prędkość przepływu.\n" "Zresetowano do 0,5" @@ -3765,14 +3765,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Zbyt mała wysokość warstwy.\n" "Zresetowano do 0,2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Zbyt mała odległość między ścieżkami przy prasowaniu.\n" "Zresetowano do 0,1" @@ -3879,8 +3879,8 @@ msgstr "" "Zresetuj do wartości 0" msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4461,7 +4461,7 @@ msgstr "Kolejność" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4572,9 +4572,6 @@ msgstr "Widok przekroju" msgid "Assemble Control" msgstr "Kontrola montażu" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5375,11 +5372,6 @@ msgstr "Przeładuj listę plików z drukarki." msgid "No printers." msgstr "Brak drukarek." -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "Wczytywanie listy plików..." @@ -9343,10 +9335,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -10061,7 +10053,7 @@ msgstr "" msgid "Preferred orientation" msgstr "Preferowana orientacja" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "" "Automatyczne orientowanie plików STL na osi Z przy początkowym imporcie" @@ -10898,9 +10890,12 @@ msgstr "Promień wykrywania ucha brim" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" +"Kształt zostanie zredukowany przed wykryciem ostrych kątów. Ten parametr " +"wskazuje minimalną długość odchylenia dla redukcji.\n" +"0, aby dezaktywować" msgid "Select printers" msgstr "" @@ -11798,7 +11793,7 @@ msgid "Default color" msgstr "Domyślny kolor" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -12394,7 +12389,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -12589,7 +12584,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -12999,9 +12994,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -13010,9 +13005,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -13039,11 +13034,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -13273,8 +13268,8 @@ msgstr "Odległość od krawędzi. Wartość 0 ustawia ją na połowę średnicy msgid "Ironing speed" msgstr "Szybkość prasowania" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "Prędkość drukowania linii dla prasowania" msgid "Ironing angle" msgstr "Kąt prasowania" @@ -13422,8 +13417,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -13622,7 +13616,7 @@ msgstr "" "minimalny czas warstwy określony powyżej, jeśli włączona jest opcja " "spowalnianie druku dla lepszego chłodzenia warstw." -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Średnica dyszy" msgid "Configuration notes" @@ -13776,7 +13770,7 @@ msgstr "" "Określ procentowy udział nawisów w stosunku do szerokości ekstruzji i użyj " "różnych prędkości do druku. Dla 100%% nawisów, zostanie użyta prędkość mostu." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "Ten filament będzie używany do drukowania ścian" msgid "" @@ -13832,7 +13826,7 @@ msgstr "" msgid "Printer type" msgstr "Typ drukarki" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "Rodzaj drukarki" msgid "Printer notes" @@ -14333,7 +14327,7 @@ msgstr "" msgid "Skirt distance" msgstr "Odstęp skirtu od obiektu" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Odległość skirtu do brumu albo do obiektu" msgid "Skirt start point" @@ -14460,7 +14454,7 @@ msgstr "" msgid "Solid infill" msgstr "Pełne wypełnienie" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "Ten filament będzie używany do drukowania pełnego wypełnienia" msgid "" @@ -15353,7 +15347,7 @@ msgstr "Szerokość wieży czyszczącej" msgid "Wipe tower rotation angle" msgstr "Kąt obrotu wieży czyszczącej" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Kąt obrotu wieży czyszczącej względem osi x." msgid "Width of the brim." @@ -15428,7 +15422,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -16062,7 +16056,7 @@ msgstr "Załaduj własny G-code" msgid "Load custom G-code from json." msgstr "Załaduj własny G-code z json." -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "Wczytaj identyfikatory filamentu" msgid "Load filament IDs for each object." @@ -16103,25 +16097,25 @@ msgstr "" msgid "MakerLab name" msgstr "Nazwa MakerLab" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "Nazwa MakerLab do generowania tego 3mf" msgid "MakerLab version" msgstr "Wersja MakerLab" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "Wersja MakerLab do generowania tego 3mf" msgid "metadata name list" msgstr "" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "" msgid "metadata value list" msgstr "" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "" msgid "Allow 3mf with newer version to be sliced" @@ -16410,7 +16404,7 @@ msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" "Indeks aktualnej warstwy uwzględniający zero (pierwsza warstwa ma wartość 1)." -msgid "Layer z" +msgid "Layer Z" msgstr "Warstwa Z" msgid "" @@ -16420,7 +16414,7 @@ msgstr "" "Wysokość bieżącej warstwy nad stołem roboczym, mierzona do górnej krawędzi " "warstwy" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "Maksymalna warstwa Z" msgid "Height of the last layer above the print bed." @@ -17862,8 +17856,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -19129,16 +19123,6 @@ msgstr "" #~ msgid "Enable this option to use classic mode." #~ msgstr "Włącz tę opcję, aby używać trybu klasycznego" -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "Kształt zostanie zredukowany przed wykryciem ostrych kątów. Ten parametr " -#~ "wskazuje minimalną długość odchylenia dla redukcji.\n" -#~ "0, aby dezaktywować" - #~ msgid "Compatible machine" #~ msgstr "Kompatybilna maszyna" @@ -19151,21 +19135,12 @@ msgstr "" #~ msgid "Default filament color" #~ msgstr "Domyślny kolor filamentu" -#~ msgid "mm³/s" -#~ msgstr "mm³/s" - -#~ msgid "g/cm³" -#~ msgstr "g/cm³" - #~ msgid "Rotate solid infill direction" #~ msgstr "Zmień kierunek pełnego wypełnienia" #~ msgid "Rotate the solid infill direction by 90° for each layer." #~ msgstr "Zmień kierunek pełnego wypełnienia o 90° dla każdej warstwy." -#~ msgid "Print speed of ironing lines." -#~ msgstr "Prędkość drukowania linii dla prasowania" - #~ msgid "" #~ "Flow Compensation Model, used to adjust the flow for small infill areas. " #~ "The model is expressed as a comma separated pair of values for extrusion " @@ -19267,7 +19242,7 @@ msgstr "" #~ msgid "Downward machines settings" #~ msgstr "ustawienia wstecznej kompatybilności maszyn" -#~ msgid "Load filament ids for each object" +#~ msgid "Load filament IDs for each object" #~ msgstr "Wczytaj identyfikatory filamentu dla każdego obiektu" #~ msgid "" diff --git a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po index 262c0db36f..58f994dcce 100644 --- a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po +++ b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po @@ -3089,10 +3089,10 @@ msgstr "Passo" msgid "AMS Slots" msgstr "Espaços do AMS" -msgid "Left Ams" +msgid "Left AMS" msgstr "AMS Esquerdo" -msgid "Right Ams" +msgid "Right AMS" msgstr "AMS Direito" msgid "" @@ -3749,10 +3749,10 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Fluxo volumétrico máximo está muito baixo.\n" -"Redefinir para 0,5" +"Redefinir para 0,5." #, c-format, boost-format msgid "" @@ -3766,17 +3766,17 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Altura da camada muito pequena.\n" -"Redefinir para 0,2" +"Redefinir para 0,2." msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Espaçamento de passar a ferro muito pequeno.\n" -"Redefinir para 0,1" +"Redefinir para 0,1." msgid "" "Zero initial layer height is invalid.\n" @@ -3882,14 +3882,18 @@ msgstr "" "Redefinir para 0." msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" +"A profundidade do travamento deve ser menor que a profundidade da textura.\n" +"Redefinir para 50% da profundidade da textura." msgid "" "Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " "Generator to be enabled." msgstr "" +"Ambos os modos [Extrusão] e [Combinado] de Textura Difusa exigem que o " +"Gerador de Parede Arachne esteja habilitado." msgid "" "Change these settings automatically?\n" @@ -3897,6 +3901,10 @@ msgid "" "No - Disable Arachne Wall Generator and set [Displacement] mode of the " "Fuzzy Skin" msgstr "" +"Alterar essas configurações automaticamente?\n" +"Sim - Habilitar Gerador de Parede Arachne\n" +"Não - Desabilitar Gerador de Parede Arachne e setar o modo [Deslocamento] da " +"Textura Difusa" msgid "" "Spiral mode only works when wall loops is 1, support is disabled, top shell " @@ -4467,7 +4475,7 @@ msgstr "Sequência" msgid "object selection" msgstr "seleção de objeto" -msgid "part selectiont" +msgid "part selection" msgstr "seleção de peça" msgid "number keys" @@ -4578,9 +4586,6 @@ msgstr "Vista de Seção" msgid "Assemble Control" msgstr "Controle de Montagem" -msgid "part selection" -msgstr "seleção de peça" - msgid "Selection Mode" msgstr "Modo de Seleção" @@ -5375,11 +5380,6 @@ msgstr "Recarregar lista de arquivos da impressora." msgid "No printers." msgstr "Nenhuma impressora." -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "Carregando lista de arquivos…" @@ -9378,10 +9378,10 @@ msgstr "" msgid "Air Pump" msgstr "Bomba de Ar" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "Laser 10 W" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "Laser 40 W" msgid "Cutting Module" @@ -10100,7 +10100,7 @@ msgstr "Altura máxima de impressão limitada pelo mecanismo da impressora." msgid "Preferred orientation" msgstr "Orientação preferida" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "" "Orientar automaticamente os arquivos STL no eixo Z durante a importação " "inicial." @@ -10935,9 +10935,12 @@ msgstr "Raio de detecção da orelha da borda" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" +"A geometria será decimada antes de detectar ângulos agudos. Este parâmetro " +"indica o comprimento mínimo da divergência para a decimação.\n" +"0 para desativar." msgid "Select printers" msgstr "Selecionar impressoras" @@ -11843,9 +11846,11 @@ msgid "Default color" msgstr "Cor padrão" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" +"Cor padrão do filamento.\n" +"Clique com o botão direito para redefinir o valor para o padrão do sistema." msgid "Filament notes" msgstr "Observações do filamento" @@ -12449,10 +12454,10 @@ msgid "Default jerk." msgstr "Jerk padrão." msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" "Desvio de Junção do Firmware Marlin (substitui a configuração de Jerk XY " -"tradicional)" +"tradicional)." msgid "Jerk of outer walls." msgstr "Jerk nas paredes externas." @@ -12650,7 +12655,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -13099,9 +13104,9 @@ msgstr "Densidade de preenchimento de esqueleto" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" "A parte restante do contorno do modelo após a remoção de uma certa " "profundidade da superfície é chamada de esqueleto. Este parâmetro é usado " @@ -13116,9 +13121,9 @@ msgstr "Densidade de preenchimento de textura" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" "A porção da superfície externa do modelo dentro de uma determinada faixa de " "profundidade é chamada de textura. Este parâmetro é usado para ajustar a " @@ -13153,11 +13158,11 @@ msgstr "Largura da linha do esqueleto" msgid "Adjust the line width of the selected skeleton paths." msgstr "Ajuste da largura da linha dos caminhos de esqueleto selecionados." -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -13389,8 +13394,8 @@ msgstr "" msgid "Ironing speed" msgstr "Velocidade do passar a ferro" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "Velocidade de impressão das linhas do passar a ferro." msgid "Ironing angle" msgstr "Ângulo do passar a ferro" @@ -13530,10 +13535,10 @@ msgid "Maximum Junction Deviation" msgstr "Desvio de Junção Máximo" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" -msgstr "Desvio de junção máximo (M205 J, aplicável apenas se JD > 0 para " -"Firmware Marlin)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" +msgstr +"Desvio de junção máximo (M205 J, aplicável apenas se JD > 0 para Firmware " +"Marlin)" msgid "Minimum speed for extruding" msgstr "Velocidade mínima para extrusão" @@ -13736,8 +13741,8 @@ msgstr "" "velocidade para manter o tempo mínimo de camada definido acima quando a " "desaceleração para melhor resfriamento da camada está ativada." -msgid "Diameter of nozzle" -msgstr "Diâmetro do bico" +msgid "The diameter of nozzle." +msgstr "O diâmetro do bico." msgid "Configuration notes" msgstr "Notas de configuração" @@ -13891,8 +13896,8 @@ msgstr "" "perímetro e usa uma velocidade diferente de impressão. Para saliências " "100%%, a velocidade de ponte é usada." -msgid "Filament to print walls" -msgstr "Filamento para imprimir paredes" +msgid "Filament to print walls." +msgstr "Filamento para imprimir paredes." msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " @@ -13946,8 +13951,8 @@ msgstr "" msgid "Printer type" msgstr "Tipo de impressora" -msgid "Type of the printer" -msgstr "Tipo da impressora" +msgid "Type of the printer." +msgstr "Tipo da impressora." msgid "Printer notes" msgstr "Notas da impressora" @@ -14448,8 +14453,8 @@ msgstr "" msgid "Skirt distance" msgstr "Distância da saia" -msgid "Distance from skirt to brim or object" -msgstr "Distância da saia para a borda ou objeto" +msgid "The distance from the skirt to the brim or the object." +msgstr "A distância da saia para a borda ou objeto." msgid "Skirt start point" msgstr "Ponto de partida da saia" @@ -14573,8 +14578,8 @@ msgstr "" msgid "Solid infill" msgstr "Preenchimento sólido" -msgid "Filament to print solid infill" -msgstr "Filamento para imprimir o preenchimento sólido" +msgid "Filament to print solid infill." +msgstr "Filamento para imprimir o preenchimento sólido." msgid "" "Line width of internal solid infill. If expressed as a %, it will be " @@ -15483,8 +15488,8 @@ msgstr "Largura da torre de preparação." msgid "Wipe tower rotation angle" msgstr "Ângulo de rotação da torre de limpeza" -msgid "Wipe tower rotation angle with respect to x-axis." -msgstr "Ângulo de rotação da torre de limpeza em relação ao eixo x." +msgid "Wipe tower rotation angle with respect to X axis." +msgstr "Ângulo de rotação da torre de limpeza em relação ao eixo X." msgid "Width of the brim." msgstr "" @@ -15566,7 +15571,7 @@ msgstr "Comprimento extra de nervura" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" "Valores positivos podem aumentar o tamanho da parede da nervura, enquanto " @@ -16206,7 +16211,7 @@ msgstr "Carregar G-code personalizado" msgid "Load custom G-code from json." msgstr "Carregar G-code personalizado do json." -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "Carregar IDs de filamentos" msgid "Load filament IDs for each object." @@ -16245,26 +16250,26 @@ msgstr "" msgid "MakerLab name" msgstr "Nome do MakerLab" -msgid "MakerLab name to generate this 3mf" -msgstr "Nome do MakerLab para gerar este 3mf" +msgid "MakerLab name to generate this 3mf." +msgstr "Nome do MakerLab para gerar este 3mf." msgid "MakerLab version" msgstr "Versão do MakerLab" -msgid "MakerLab version to generate this 3mf" -msgstr "Versão do MakerLab para gerar este 3mf" +msgid "MakerLab version to generate this 3mf." +msgstr "Versão do MakerLab para gerar este 3mf." msgid "metadata name list" msgstr "lista de nomes de metadados" -msgid "metadata name list added into 3mf" -msgstr "lista de nomes de metadados adicionada ao 3mf" +msgid "metadata name list added into 3mf." +msgstr "lista de nomes de metadados adicionada ao 3mf." msgid "metadata value list" msgstr "lista de valores de metadados" -msgid "metadata value list added into 3mf" -msgstr "lista de valores de metadados adicionada ao 3mf" +msgid "metadata value list added into 3mf." +msgstr "lista de valores de metadados adicionada ao 3mf." msgid "Allow 3mf with newer version to be sliced" msgstr "Permitir que 3mf com versão mais recente seja fatiado" @@ -16549,8 +16554,8 @@ msgstr "" "Índice da camada atual. Baseado em um (ou seja, a primeira camada é o número " "1)." -msgid "Layer z" -msgstr "Camada z" +msgid "Layer Z" +msgstr "Camada Z" msgid "" "Height of the current layer above the print bed, measured to the top of the " @@ -16559,8 +16564,8 @@ msgstr "" "Altura da camada atual acima da mesa de impressão, medida até o topo da " "camada." -msgid "Maximal layer z" -msgstr "Altura máxima da camada z" +msgid "Maximal layer Z" +msgstr "Altura máxima da camada Z" msgid "Height of the last layer above the print bed." msgstr "Altura da última camada acima da mesa de impressão." @@ -18029,8 +18034,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" "O arquivo: %s \n" @@ -19262,16 +19267,6 @@ msgstr "" #~ msgid "Enable this option to use classic mode." #~ msgstr "Ative esta opção para usar o modo clássico." -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "A geometria será decimada antes de detectar ângulos agudos. Este " -#~ "parâmetro indica o comprimento mínimo da divergência para a decimação.\n" -#~ "0 para desativar." - #~ msgid "Compatible machine" #~ msgstr "Máquina compatível" @@ -19290,9 +19285,6 @@ msgstr "" #~ msgid "Rotate the solid infill direction by 90° for each layer." #~ msgstr "Rotaciona a direção do preenchimento em 90° para cada camada." -#~ msgid "Print speed of ironing lines." -#~ msgstr "Velocidade de impressão das linhas do passar a ferro." - #~ msgid "" #~ "Flow Compensation Model, used to adjust the flow for small infill areas. " #~ "The model is expressed as a comma separated pair of values for extrusion " diff --git a/localization/i18n/ru/OrcaSlicer_ru.po b/localization/i18n/ru/OrcaSlicer_ru.po index fd5dd72d9a..9fdf5507ec 100644 --- a/localization/i18n/ru/OrcaSlicer_ru.po +++ b/localization/i18n/ru/OrcaSlicer_ru.po @@ -3118,10 +3118,10 @@ msgstr "Шаг" msgid "AMS Slots" msgstr "Слоты АСПП" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" # Примечание: выбор слотов ограничен одним типом материала. @@ -3793,7 +3793,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Слишком маленький максимальный объёмный расход.\n" "Значение будет сброшено на 0,5." @@ -3810,14 +3810,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Слишком маленькая высота слоя.\n" "Значение будет сброшено на 0,2." msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Слишком маленькое расстояние между линиями разглаживания.\n" "Значение будет сброшено на 0,1." @@ -3925,8 +3925,8 @@ msgstr "" "Значение сброшено на 0." msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4528,7 +4528,7 @@ msgstr "Последовательность" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4639,9 +4639,6 @@ msgstr "Отсечение вида" msgid "Assemble Control" msgstr "Управление сборкой" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5443,11 +5440,6 @@ msgstr "Перезагрузка списка файлов с принтера." msgid "No printers." msgstr "Принтеры отсутствуют." -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "Загрузка списка файлов..." @@ -6706,7 +6698,7 @@ msgstr "Все модели будут удалены, продолжить?" msgid "The current project has unsaved changes, save it before continue?" msgstr "" -"В текущем проекте имеются несохранённые изменения. \n" +"В текущем проекте имеются несохранённые изменения.\n" "Сохранить их перед продолжением?" msgid "Number of copies:" @@ -8067,7 +8059,7 @@ msgid "" "Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "При записи таймлапса без видимости головы рекомендуется добавить «Черновая " -"башня таймлапса». \n" +"башня таймлапса».\n" "Щёлкните правой кнопкой мыши на пустом месте стола и выберите «Добавить " "примитив» -> «Черновая башня таймлапса»." @@ -9504,10 +9496,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -10231,7 +10223,7 @@ msgid "Preferred orientation" msgstr "Предпочтительная ориентация" # Автоориентация stl файлов по оси Z при первоначальном импорте. -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "Автоориентация моделей относительно оси Z при первоначальном импорте." msgid "Printer preset names" @@ -10550,7 +10542,7 @@ msgstr "" "Если хотите чтобы все заполнения щелей, в том числе сгенерированные " "классическим генератором периметров, были удалены (т.е. не печатались), " "установите высокое значение параметра «Игнорировать небольшие щели», " -"например, 999999. \n" +"например, 999999.\n" "\n" "Однако это не рекомендуется, так как заполнение щелей между периметрами " "делает модель прочнее. Если слишком много заполнений появляется между " @@ -10908,7 +10900,7 @@ msgid "" "3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "Эта опция создаёт мосты для отверстий с зенковкой, позволяя печатать их без " -"поддержки. \n" +"поддержки.\n" "\n" "Опции:\n" "1. Нет (т.е. отключено)\n" @@ -11073,9 +11065,12 @@ msgstr "Радиус обнаружения ушек каймы" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" +"Геометрия модели будет упрощена перед обнаружением острых углов. Этот " +"параметр задаёт минимальную длину отклонения для её упрощения.\n" +"Установите 0 для отключения." msgid "Select printers" msgstr "Выбор профиля принтера" @@ -11993,7 +11988,7 @@ msgid "Default color" msgstr "Цвет по умолчанию" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -12591,7 +12586,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -12804,7 +12799,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -12954,7 +12949,7 @@ msgstr "" "Включите, если хотите чтобы программа пыталась заменить последовательности " "из коротких прямолинейных участков дугами (используя команды G2 и G3). " "Функция должна поддерживаться прошивкой принтера. Значение допуска " -"траектории такое же как разрешение G-кода. \n" +"траектории такое же как разрешение G-кода.\n" "\n" "Примечание: для устройств с прошивкой Klipper рекомендуется отключить эту " "опцию. Klipper не получает преимуществ от этой опции, поскольку прошивка " @@ -13045,7 +13040,7 @@ msgid "" "command: M106 P2 S(0-255)." msgstr "" "Если в принтере имеет вспомогательный вентилятор для охлаждения моделей " -"(обычно это боковой вентилятор), можете включить эту опцию. \n" +"(обычно это боковой вентилятор), можете включить эту опцию.\n" "G-код команда: M106 P2 S(0-255)." msgid "" @@ -13241,9 +13236,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -13252,9 +13247,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -13281,11 +13276,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -13305,7 +13300,7 @@ msgid "" "Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " "(eg 80%). This value must not be larger than the nozzle diameter." msgstr "" -"Максимальная высота слоя для комбинированного разреженного заполнения. \n" +"Максимальная высота слоя для комбинированного разреженного заполнения.\n" "\n" "Установите 0 или 100%, чтобы использовать значение диаметра сопла (для " "максимального сокращения времени печати), или значение ~80% для увеличения " @@ -13522,8 +13517,8 @@ msgstr "" msgid "Ironing speed" msgstr "Скорость разглаживания" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "Скорость разглаживания." msgid "Ironing angle" msgstr "Угол разглаживания" @@ -13671,8 +13666,7 @@ msgid "Maximum Junction Deviation" msgstr "Макс. значение Junction Deviation" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -13831,7 +13825,7 @@ msgid "" msgstr "" "Меньшее значение приводит к более плавному изменению скорости экструзии. " "Однако это приводит к значительному увеличению размера G-код файла и " -"увеличению количества инструкций для обработки принтером. \n" +"увеличению количества инструкций для обработки принтером.\n" "\n" "Значение по умолчанию, равное 3, хорошо подходит для большинства случаев. " "Если принтер печатает с мини-фризами, увеличьте это значение, чтобы " @@ -13849,7 +13843,7 @@ msgid "" "not be visible to the user." msgstr "" "Сглаживание скорости экструзии будет применяться только к внешним периметрам " -"и нависаниям. \n" +"и нависаниям.\n" "Это помогает уменьшить количество артефактов, вызванные резкими перепадами " "скорости на видимых внешних участках, без влияния на скорость печати " "внутренних элементов, которые не видны пользователю." @@ -13869,7 +13863,7 @@ msgstr "" "исключением первых нескольких слоёв, которые обычно настроены на работу без " "охлаждения.\n" "Пожалуйста, включите вспомогательный вентилятор для охлаждения моделей " -"(auxiliary_fan) в настройках принтера, чтобы использовать эту функцию. \n" +"(auxiliary_fan) в настройках принтера, чтобы использовать эту функцию.\n" "G-код команда: M106 P2 S(0-255)." msgid "" @@ -13889,7 +13883,7 @@ msgstr "" "сохранить минимальное время слоя, указанное выше, если включена опция " "«Замедлять печать для лучшего охлаждения слоёв»." -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Диаметр сопла" msgid "Configuration notes" @@ -14042,7 +14036,7 @@ msgstr "" "Определяет процент нависания относительно ширины линии и использует разную " "скорость печати. Для 100%%-го свеса используется скорость печати мостов." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "Пластиковая нить для печати периметров." msgid "" @@ -14098,7 +14092,7 @@ msgstr "" msgid "Printer type" msgstr "Тип принтера" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "Тип принтера" msgid "Printer notes" @@ -14609,7 +14603,7 @@ msgstr "" msgid "Skirt distance" msgstr "Расстояние до юбки" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Расстояние между юбкой и каймой, или моделью." msgid "Skirt start point" @@ -14733,7 +14727,7 @@ msgstr "" msgid "Solid infill" msgstr "Сплошное заполнение" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "Пластиковая нить для печати сплошного заполнения." msgid "" @@ -14793,7 +14787,7 @@ msgid "" msgstr "" "Обычно при печати спиральной вазы поток первого витка увеличивается от 0% до " "100%, что в некоторых случаях может привести к недоэкструзии в начале " -"спирали. \n" +"спирали.\n" "Этот коэффициент позволяет изменить поток в начале спиральной вазы, чтобы " "избежать подобных проблем." @@ -14810,7 +14804,7 @@ msgid "" msgstr "" "Обычно при печати спиральной вазы поток последнего витка уменьшается от 100% " "до 0%, что в некоторых случаях может привести к недоэкструзии в конце " -"спирали. \n" +"спирали.\n" "Этот коэффициент позволяет изменить поток в конце спиральной вазы, чтобы " "избежать подобных проблем." @@ -15508,7 +15502,7 @@ msgstr "" "исключить коробление материала, и потенциально привести к повышению " "прочности межслойного соединения. Однако в то же время более высокая " "температура камеры снижает эффективность фильтрации воздуха при печати ABS и " -"ASA. \n" +"ASA.\n" "\n" "Для PLA, PETG, TPU, PVA и других низкотемпературных материалов этот параметр " "следует отключить, поскольку температура внутри термокамеры должна быть " @@ -15703,7 +15697,7 @@ msgstr "" msgid "Wipe tower rotation angle" msgstr "Угол поворота черновой башни" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Угол поворота черновой башни относительно оси X." msgid "Width of the brim." @@ -15787,7 +15781,7 @@ msgstr "Дополнительная длина ребра" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" "Положительное значение может увеличить длину ребра, а отрицательное - " @@ -16457,7 +16451,7 @@ msgid "Load custom G-code from json." msgstr "Загрузить пользовательской G-код из json" # ??? назначить идентификаторы -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "Загрузить идентификаторы прутков" msgid "Load filament IDs for each object." @@ -16500,25 +16494,25 @@ msgstr "" msgid "MakerLab name" msgstr "Имя MakerLab" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "Имя MakerLab, использованное для создания этого 3mf-файла." msgid "MakerLab version" msgstr "Версия MakerLab" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "Версия MakerLab, использованная для создания этого 3mf-файла." msgid "metadata name list" msgstr "Список имён метаданных" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "Список имён метаданных добавляемых в 3mf" msgid "metadata value list" msgstr "Список значений метаданных" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "Список значений метаданных добавляемых в 3mf" msgid "Allow 3mf with newer version to be sliced" @@ -16812,7 +16806,7 @@ msgstr "" "Номер текущего слоя отсчитываемый от единицы (т.е. первый слой имеет номер " "1)." -msgid "Layer z" +msgid "Layer Z" msgstr "Высота слоя над столом" msgid "" @@ -16821,7 +16815,7 @@ msgid "" msgstr "" "Высота текущего слоя над печатным столом, измеренная до верхней части слоя." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "Макс. высота слоя над столом" msgid "Height of the last layer above the print bed." @@ -16865,7 +16859,7 @@ msgid "" "It seems object %s has %s. Please re-orient the object or enable support " "generation." msgstr "" -"Похоже, что у модели %s имеются замечания - %s. \n" +"Похоже, что у модели %s имеются замечания - %s.\n" "Переориентируйте её или включите генерацию поддержки." msgid "Generating support" @@ -17155,10 +17149,10 @@ msgstr "" "Подробную информацию о калибровке динамики потока можно найти на нашем вики-" "сайте.\n" "\n" -"При обычных обстоятельствах калибровка не требуется. \n" +"При обычных обстоятельствах калибровка не требуется.\n" "Если при запуске печати одним цветом/материалом в меню запуска печати " "отмечена опция «Калибровка динамики потока», то калибровка пластиковой нити " -"будет производится старым способом. \n" +"будет производится старым способом.\n" "При запуске печати несколькими цветами/материалами, принтер будет " "использовать параметр компенсации по умолчанию для материала при каждой его " "смене, что в большинстве случаев позволяет получить хороший результат.\n" @@ -17986,7 +17980,7 @@ msgstr "" msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." msgstr "" -"В поле ввода производителя/серии пластиковой нити введены пробелы. \n" +"В поле ввода производителя/серии пластиковой нити введены пробелы.\n" "Пожалуйста, введите нормальное имя." msgid "The vendor cannot be a number. Please re-enter." @@ -18004,7 +17998,7 @@ msgid "" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" -"Пластиковая нить с таким именем %s уже существует. \n" +"Пластиковая нить с таким именем %s уже существует.\n" "Если продолжить создание, то созданный профиль будет отображаться с полным " "именем. Хотите продолжить?" @@ -18118,7 +18112,7 @@ msgid "" "choose the vendor and model of the printer" msgstr "" "Вы не выбрали на базе какого профиля принтера хотите создать новый профиль " -"принтера. \n" +"принтера.\n" "Пожалуйста, выберите производителя и модель принтера." msgid "" @@ -18180,7 +18174,7 @@ msgstr "" msgid "" "All inputs in the custom printer vendor or model are spaces. Please re-enter." msgstr "" -"В поле ввода производителя/модели принтера введены пробелы. \n" +"В поле ввода производителя/модели принтера введены пробелы.\n" "Пожалуйста, введите нормальное имя." msgid "Please check bed printable shape and origin input." @@ -18230,7 +18224,7 @@ msgstr "" "\n" "Программа обнаружила, что функция синхронизации пользовательских профилей " "отключена, \n" -"что может привести к неудачной настройке прутка на вкладке «Принтер». \n" +"что может привести к неудачной настройке прутка на вкладке «Принтер».\n" "Нажмите «Синхронизировать пользовательские профили», чтобы включить функцию " "синхронизации." @@ -18282,8 +18276,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -18299,7 +18293,7 @@ msgid "" "User's filament preset set.\n" "Can be shared with others." msgstr "" -"Экспортируется набор пользовательских профилей пластиковых нитей. \n" +"Экспортируется набор пользовательских профилей пластиковых нитей.\n" "Вы сможете делиться этими файлами с другими пользователями." msgid "" @@ -18316,7 +18310,7 @@ msgid "" "Only printer names with user printer presets will be displayed, and each " "preset you choose will be exported as a zip." msgstr "" -"Будут отображаться только пользовательские профили принтеров. \n" +"Будут отображаться только пользовательские профили принтеров.\n" "Все они будут экспортированы в единый zip-файл." msgid "" @@ -18333,7 +18327,7 @@ msgid "" "exported as a zip." msgstr "" "Будут отображаться только профили принтеров с изменёнными профилями " -"процесса. \n" +"процесса.\n" "Все пользовательские профили процессов будут экспортированы в единый zip-" "файл." @@ -18396,7 +18390,7 @@ msgid "" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" -"Все профили прутка, относящиеся к этому материалу, будут удалены. \n" +"Все профили прутка, относящиеся к этому материалу, будут удалены.\n" "Если вы используете этот пруток в принтере, пожалуйста, сбросьте информацию " "о прутке для этого слота." @@ -19541,16 +19535,6 @@ msgstr "" #~ msgid "Enable this option to use classic mode." #~ msgstr "Включите эту опцию для использования классического режима." -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "Геометрия модели будет упрощена перед обнаружением острых углов. Этот " -#~ "параметр задаёт минимальную длину отклонения для её упрощения.\n" -#~ "Установите 0 для отключения." - #~ msgid "Compatible machine" #~ msgstr "Совместимые принтеры" @@ -19576,9 +19560,6 @@ msgstr "" #~ msgstr "" #~ "Разрешить поворот шаблона сплошного заполнение на 90° на каждом слое." -#~ msgid "Print speed of ironing lines." -#~ msgstr "Скорость разглаживания." - #~ msgid "" #~ "Flow Compensation Model, used to adjust the flow for small infill areas. " #~ "The model is expressed as a comma separated pair of values for extrusion " @@ -19673,7 +19654,7 @@ msgstr "" #~ msgid "Downward machines settings" #~ msgstr "Настройки совместимости принтера" -#~ msgid "Load filament ids for each object" +#~ msgid "Load filament IDs for each object" #~ msgstr "Загрузить идентификаторы прутков для каждого объекта" #~ msgid "" @@ -19823,7 +19804,7 @@ msgstr "" #~ "скорости экструзии, что приводит к более быстрому переключению " #~ "скоростей.\n" #~ "\n" -#~ "Значение 0 отключает эту функцию. \n" +#~ "Значение 0 отключает эту функцию.\n" #~ "\n" #~ "Для высокоскоростных принтеров с высокопроизводительным директ-" #~ "экструдером (например, Bambu lab или Voron) обычно не требуется " diff --git a/localization/i18n/sv/OrcaSlicer_sv.po b/localization/i18n/sv/OrcaSlicer_sv.po index e6486ca117..340684cf73 100644 --- a/localization/i18n/sv/OrcaSlicer_sv.po +++ b/localization/i18n/sv/OrcaSlicer_sv.po @@ -3010,10 +3010,10 @@ msgstr "Steg" msgid "AMS Slots" msgstr "AMS Fack" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3634,7 +3634,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "För liten max volymhastighet.\n" "Värdet återställdes till 0,5" @@ -3648,14 +3648,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "För liten lagerhöjd.\n" "Den har återställts till 0.2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "För litet avstånd för strykning.\n" "Återställ till 0.1" @@ -3750,8 +3750,8 @@ msgid "" msgstr "" msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4321,7 +4321,7 @@ msgstr "Sekvens" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4432,9 +4432,6 @@ msgstr "Sektionsvy" msgid "Assemble Control" msgstr "Monterings Kontroll" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5209,11 +5206,6 @@ msgstr "" msgid "No printers." msgstr "Ingen printer." -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "Laddar fil lista..." @@ -9008,10 +9000,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -9644,7 +9636,7 @@ msgstr "Maximala utskriftshöjd begränsas av skrivarens mekanism" msgid "Preferred orientation" msgstr "" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "" msgid "Printer preset names" @@ -10292,7 +10284,7 @@ msgstr "" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" @@ -10968,7 +10960,7 @@ msgid "Default color" msgstr "Standardfärg" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -11467,7 +11459,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -11642,7 +11634,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -11991,9 +11983,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -12002,9 +11994,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -12031,11 +12023,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -12223,8 +12215,8 @@ msgstr "" msgid "Ironing speed" msgstr "Stryknings hastighet" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "Utskrifts hastighet för strykning" msgid "Ironing angle" msgstr "" @@ -12327,7 +12319,7 @@ msgid "Maximum acceleration of the Y axis" msgstr "Max acceleration på Y-axis" msgid "Maximum acceleration of the Z axis" -msgstr "Max acceleration på Z-axis" +msgstr "Max acceleration på Z axis" msgid "Maximum acceleration of the E axis" msgstr "Max acceleration på E-axis" @@ -12351,7 +12343,7 @@ msgid "Maximum jerk of the Y axis" msgstr "Max jerk på Y-axis" msgid "Maximum jerk of the Z axis" -msgstr "Max jerk på Z-axis" +msgstr "Max jerk på Z axis" msgid "Maximum jerk of the E axis" msgstr "Max jerk på E-axis" @@ -12360,8 +12352,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -12508,7 +12499,7 @@ msgid "" "is enabled." msgstr "" -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Diametern på nozzeln" msgid "Configuration notes" @@ -12639,7 +12630,7 @@ msgstr "" "hastigheter för att skriva ut. Vid 100%% överhäng, bridge/brygg hastighet " "användas." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "" msgid "" @@ -12678,7 +12669,7 @@ msgstr "" msgid "Printer type" msgstr "" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "" msgid "Printer notes" @@ -13102,7 +13093,7 @@ msgstr "" msgid "Skirt distance" msgstr "Skirt avstånd" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Avståndet ifrån skirt till brim eller objektet" msgid "Skirt start point" @@ -13204,7 +13195,7 @@ msgstr "" msgid "Solid infill" msgstr "" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "" msgid "" @@ -13984,7 +13975,7 @@ msgstr "Prime tornets bredd" msgid "Wipe tower rotation angle" msgstr "" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "" msgid "Width of the brim." @@ -14040,7 +14031,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -14618,7 +14609,7 @@ msgstr "" msgid "Load custom G-code from json." msgstr "" -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "" msgid "Load filament IDs for each object." @@ -14653,25 +14644,25 @@ msgstr "" msgid "MakerLab name" msgstr "" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "" msgid "MakerLab version" msgstr "" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "" msgid "metadata name list" msgstr "" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "" msgid "metadata value list" msgstr "" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "" msgid "Allow 3mf with newer version to be sliced" @@ -14919,7 +14910,7 @@ msgstr "" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" -msgid "Layer z" +msgid "Layer Z" msgstr "" msgid "" @@ -14927,7 +14918,7 @@ msgid "" "layer." msgstr "" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "" msgid "Height of the last layer above the print bed." @@ -16287,8 +16278,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -17370,15 +17361,6 @@ msgstr "" #~ msgid "Default filament color" #~ msgstr "Standard filament färg" -#~ msgid "mm³/s" -#~ msgstr "mm³/s" - -#~ msgid "g/cm³" -#~ msgstr "g/cm³" - -#~ msgid "Print speed of ironing lines." -#~ msgstr "Utskrifts hastighet för strykning" - #~ msgid "" #~ "The highest printable layer height for the extruder. Used to limit the " #~ "maximum layer height when adaptive layer height is enabled." diff --git a/localization/i18n/tr/OrcaSlicer_tr.po b/localization/i18n/tr/OrcaSlicer_tr.po index b4e46dfaeb..5a5face702 100644 --- a/localization/i18n/tr/OrcaSlicer_tr.po +++ b/localization/i18n/tr/OrcaSlicer_tr.po @@ -3024,11 +3024,11 @@ msgstr "Adım" msgid "AMS Slots" msgstr "AMS Yuvaları" -msgid "Left Ams" -msgstr "Sol Ams" +msgid "Left AMS" +msgstr "Sol AMS" -msgid "Right Ams" -msgstr "Sağ Ams" +msgid "Right AMS" +msgstr "Sağ AMS" msgid "Note: Only the AMS slots loaded with the same material type can be selected." msgstr "Not: Yalnızca aynı malzeme türüne sahip AMS yuvaları seçilebilir." @@ -3651,7 +3651,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Maksimum hacimsel hız çok küçük.\n" "0,5'e sıfırla" @@ -3668,14 +3668,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Katman yüksekliği çok küçük.\n" "0,2'ye sıfırla" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Çok küçük ütüleme aralığı.\n" "0,1'e sıfırla" @@ -3779,8 +3779,8 @@ msgstr "" "0 a sıfırla." msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" "Kilit derinliği cilt derinliğinden daha küçük olmalıdır.\n" "Cilt derinliğinin %50'sine sıfırlayın" @@ -4363,7 +4363,7 @@ msgstr "Sekans" msgid "object selection" msgstr "nesne seçimi" -msgid "part selectiont" +msgid "part selection" msgstr "parça seçimi" msgid "number keys" @@ -4474,9 +4474,6 @@ msgstr "Bölüm Görünümü" msgid "Assemble Control" msgstr "Montaj Kontrolü" -msgid "part selection" -msgstr "parça seçimi" - msgid "Selection Mode" msgstr "Seçim Modu" @@ -5252,13 +5249,6 @@ msgstr "Dosya listesini yazıcıdan yeniden yükleyin." msgid "No printers." msgstr "Yazıcı yok." -msgid "" -"Please check the network and try again, You can restart or update the printer if the " -"issue persists." -msgstr "" -"Lütfen ağınızı kontrol edin ve tekrar deneyin. Sorun devam ederse yazıcıyı yeniden " -"başlatabilir veya güncelleyebilirsiniz." - msgid "Loading file list..." msgstr "Dosya listesi yükleniyor..." @@ -9139,11 +9129,13 @@ msgstr "" msgid "Air Pump" msgstr "Hava Pompası" -msgid "Laser 10w" -msgstr "Lazer 10w" +#, fuzzy +msgid "Laser 10 W" +msgstr "Lazer 10 W" -msgid "Laser 40w" -msgstr "Lazer 40w" +#, fuzzy +msgid "Laser 40 W" +msgstr "Lazer 40 W" msgid "Cutting Module" msgstr "Kesim Modülü" @@ -9814,7 +9806,7 @@ msgstr "Yazıcının mekanizması tarafından sınırlanan maksimum yazdırılab msgid "Preferred orientation" msgstr "Tercih edilen yönlendirme" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "İlk içe aktarma sonrasında stl'leri Z ekseninde otomatik olarak yönlendirin" msgid "Printer preset names" @@ -10596,7 +10588,7 @@ msgstr "Kenar kulak algılama yarıçapı" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" "Keskin açılar algılanmadan önce geometri azaltılacaktır. Bu parametre, azaltma için " @@ -11446,7 +11438,7 @@ msgid "Default color" msgstr "Varsayılan renk" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" "Varsayılan filament rengi\n" @@ -12001,7 +11993,7 @@ msgstr "Klipper'ın max_accel_to_decel değeri ivmenin bu %%'sine göre ayarlana msgid "Default jerk." msgstr "Varsayılan sarsıntı." -msgid "Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +msgid "Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "Marlin Firmware Köşe Sapması (geleneksel XY Sarsıntı ayarının yerini alır)" msgid "Jerk of outer walls." @@ -12183,21 +12175,23 @@ msgid "" "Fuzzy skin generation mode. Works only with Arachne!\n" "Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " "sideways from the original path.\n" -"Extrusion: The mode when the pattern formed by the amount of extruded plastic. This " -"is the fast and straight algorithm without unnecessary nozzle shake that gives a " -"smooth pattern. But it is more useful for forming loose walls in the entire they " -"array.\n" -"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the walls is " -"similar to [Displacement] Mode, but it leaves no pores between the perimeters.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" "\n" -"Attention! The [Extrusion] and [Combined] modes works only the fuzzy_skin_thickness " -"parameter not more than the thickness of printed loop.At the same time, the width of " -"the extrusion for a particular layer should also not be below a certain level. It is " -"usually equal 15-25%% of a layer height. Therefore, the maximum fuzzy skin thickness " -"with a perimeter width of 0.4 mm and a layer height of 0.2 mm will be 0.4-" -"(0.2*0.25)=±0.35mm! If you enter a higher parameter than this, the error " -"Flow::spacing() will displayed, and the model will not be sliced. You can choose " -"this number until this error is repeated." +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed " +"loop. At the same time, the width of the extrusion for a particular layer " +"should also not be below a certain level. It is usually equal 15-25%% of a " +"layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " +"width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " +"If you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." msgstr "" "Pütürlü yüzey oluşturma modu. Sadece Arachne ile çalışır!\n" "Yer Değiştirme: Desen, nozülün orijinal yoldan yana kaydırılmasıyla oluşturulduğu " @@ -12613,7 +12607,7 @@ msgstr "İskelet dolgu yoğunluğu" msgid "" "The remaining part of the model contour after removing a certain depth from the " "surface is called the skeleton. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different skeleton " +"section. When two regions have the same sparse infill settings but different skeleton " "densities, their skeleton areas will develop overlapping sections.default is as same " "as infill density." msgstr "" @@ -12628,7 +12622,7 @@ msgstr "Yüzey dolgu yoğunluğu" msgid "" "The portion of the model's outer surface within a certain depth range is called the " -"skin. This parameter is used to adjust the density of this section.When two regions " +"skin. This parameter is used to adjust the density of this section. When two regions " "have the same sparse infill settings but different skin densities, This area will " "not be split into two separate regions.default is as same as infill density." msgstr "" @@ -12661,14 +12655,15 @@ msgstr "İskelet çizgi genişliği" msgid "Adjust the line width of the selected skeleton paths." msgstr "Seçili iskelet yollarının çizgi genişliğini ayarlayın." -msgid "Symmetric infill y axis" -msgstr "Simetrik dolgu y ekseni" +msgid "Symmetric infill Y axis" +msgstr "Simetrik dolgu Y ekseni" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want these " -"parts to have symmetric textures, please click this option on one of the parts." +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of the " +"parts." msgstr "" -"Modelin y ekseni etrafında simetrik iki parçası varsa ve bu parçaların simetrik " +"Modelin Y ekseni etrafında simetrik iki parçası varsa ve bu parçaların simetrik " "dokulara sahip olmasını istiyorsanız, lütfen parçalardan birinde bu seçeneğe " "tıklayın." @@ -12891,7 +12886,7 @@ msgstr "Kenarlardan korunacak mesafe. 0 değeri bunu nozül çapının yarısın msgid "Ironing speed" msgstr "Ütüleme hızı" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "Ütüleme çizgilerinin baskı hızı" msgid "Ironing angle" @@ -13035,7 +13030,8 @@ msgstr "E ekseninin maksimum sarsıntısı (Jerk)" msgid "Maximum Junction Deviation" msgstr "Maksimum köşe sapması" -msgid "Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" "Maksimum köşe sapması (M205 J, yalnızca Marlin Firmware için JD > 0 ise geçerlidir)" @@ -13231,7 +13227,7 @@ msgstr "" "Daha iyi katman soğutması için yavaşlama etkinleştirildiğinde, yukarıda tanımlanan " "minimum katman süresini korumak için yazıcının yavaşladığı minimum yazdırma hızı." -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Nozul çapı" msgid "Configuration notes" @@ -13377,7 +13373,7 @@ msgstr "" "Çizgi genişliğine göre çıkıntı yüzdesini tespit edin ve yazdırmak için farklı hızlar " "kullanın. %%100 çıkıntı için köprü hızı kullanılır." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "Duvarları yazdırmak için filament" msgid "" @@ -13429,7 +13425,7 @@ msgstr "" msgid "Printer type" msgstr "Yazıcı türü" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "Yazıcı türü" msgid "Printer notes" @@ -13903,7 +13899,7 @@ msgstr "" msgid "Skirt distance" msgstr "Etek mesafesi" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Etekten kenara veya nesneye olan mesafe" msgid "Skirt start point" @@ -14023,7 +14019,7 @@ msgstr "" msgid "Solid infill" msgstr "Katı dolgu" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "Katı dolguyu yazdırmak için filament" msgid "" @@ -14881,7 +14877,7 @@ msgstr "Prime tower genişliği" msgid "Wipe tower rotation angle" msgstr "Silme kulesi dönüş açısı" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "X eksenine göre silme kulesi dönüş açısı." msgid "Width of the brim." @@ -14958,7 +14954,7 @@ msgstr "Ekstra rib uzunluğu" msgid "" "Positive values can increase the size of the rib wall, while negative values can " -"reduce the size.However, the size of the rib wall can not be smaller than that " +"reduce the size. However, the size of the rib wall can not be smaller than that " "determined by the cleaning volume." msgstr "" "Pozitif değerler rib duvarının boyutunu artırabilirken, negatif değerler boyutunu " @@ -15577,7 +15573,7 @@ msgstr "Özel gcode yükle" msgid "Load custom G-code from json." msgstr "Json'dan özel gcode yükleyin" -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "Filament kimliklerini yükle" msgid "Load filament IDs for each object." @@ -15615,25 +15611,25 @@ msgstr "Yazıcı veya filament Ön Ayarlarından 3mf’deki değiştirilmiş gco msgid "MakerLab name" msgstr "MakerLab adı" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "Bu 3mf’yi oluşturmak için MakerLab adı" msgid "MakerLab version" msgstr "MakerLab version" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "Bu 3mf’yi oluşturmak için MakerLab sürümü" msgid "metadata name list" msgstr "meta veri adı listesi" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "3mf’ye meta veri adı listesi eklendi" msgid "metadata value list" msgstr "meta veri değer listesi" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "3mf’ye meta veri değeri listesi eklendi" msgid "Allow 3mf with newer version to be sliced" @@ -15901,7 +15897,7 @@ msgstr "Katman numarası" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "Geçerli katmanın dizini. Tek tabanlı (yani ilk katman 1 numaradır)." -msgid "Layer z" +msgid "Layer Z" msgstr "Z katmanı" msgid "" @@ -15909,7 +15905,7 @@ msgid "" msgstr "" "Geçerli katmanın baskı yatağı üzerindeki yüksekliği, katmanın tepesine kadar ölçülür." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "Maksimum katman z" msgid "Height of the last layer above the print bed." @@ -17324,8 +17320,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" "%s dosyası başka bir program tarafından açılmış olabilir.\n" @@ -18578,15 +18574,6 @@ msgstr "" #~ msgid "Enable this option to use classic mode." #~ msgstr "Klasik modu kullanmak için bu seçeneği etkinleştirin" -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This parameter " -#~ "indicates the minimum length of the deviation for the decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "Keskin açılar tespit edilmeden önce geometrinin büyük bir kısmı yok edilecektir. " -#~ "Bu parametre, ondalık sapmanın minimum uzunluğunu gösterir.\n" -#~ "Devre dışı bırakmak için 0" - #~ msgid "Compatible machine" #~ msgstr "Uyumlu makine" @@ -18611,9 +18598,6 @@ msgstr "" #~ msgid "Rotate the solid infill direction by 90° for each layer." #~ msgstr "Katı dolgu yönünü her katman için 90° döndürün." -#~ msgid "Print speed of ironing lines." -#~ msgstr "Ütüleme çizgilerinin baskı hızı" - #~ msgid "" #~ "Flow Compensation Model, used to adjust the flow for small infill areas. The " #~ "model is expressed as a comma separated pair of values for extrusion length and " @@ -18706,7 +18690,7 @@ msgstr "" #~ msgid "Downward machines settings" #~ msgstr "Düşüşteki makinelerin ayarları" -#~ msgid "Load filament ids for each object" +#~ msgid "Load filament IDs for each object" #~ msgstr "Her nesne için filaman kimliklerini yükleyin" #~ msgid "" @@ -19484,13 +19468,6 @@ msgstr "" #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" #~ msgstr "Lütfen geçerli bir değer girin (K in 0~0.3, N in 0.6~2.0)" -#~ msgid "Select connected printetrs (0/6)" -#~ msgstr "Bağlı yazıcıları seçin (0/6)" - -#, c-format, boost-format -#~ msgid "Select Connected Printetrs (%d/6)" -#~ msgstr "Bağlı Yazıcıları Seçin (%d/6)" - #~ msgid "PrintingPause" #~ msgstr "Yazdırma Duraklatıldı" diff --git a/localization/i18n/uk/OrcaSlicer_uk.po b/localization/i18n/uk/OrcaSlicer_uk.po index 99500722fb..c8744d573a 100644 --- a/localization/i18n/uk/OrcaSlicer_uk.po +++ b/localization/i18n/uk/OrcaSlicer_uk.po @@ -3090,10 +3090,10 @@ msgstr "Крок" msgid "AMS Slots" msgstr "Слоти AMS" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3753,7 +3753,7 @@ msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Надто маленька максимальна об'ємна швидкість.\n" "Скинути до 0,5" @@ -3770,14 +3770,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Надто маленька висота шару.\n" "Скинути на 0.2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Занадто маленька відстань між розглажуванням.\n" "Скинути на 0,1" @@ -3882,8 +3882,8 @@ msgstr "" "Значення скинуто на 0." msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4465,7 +4465,7 @@ msgstr "Послідовність" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4576,9 +4576,6 @@ msgstr "Розріз" msgid "Assemble Control" msgstr "Складання керування" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5382,11 +5379,6 @@ msgstr "Перезавантажте список файлів з принтер msgid "No printers." msgstr "Ніяких принтерів." -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "Завантаження списку файлів..." @@ -9369,10 +9361,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -10070,7 +10062,7 @@ msgstr "Максимальна висота друку, яка обмежена msgid "Preferred orientation" msgstr "Бажана орієнтація" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "Автоматичне орієнтування stl за віссю Z під час першого імпорту" msgid "Printer preset names" @@ -10904,9 +10896,12 @@ msgstr "Радіус виявлення вушка кайма" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" +"Геометрія буде оброблена перед детектуванням гострих кутів. Цей параметр " +"вказує мінімальну довжину відхилення для обробки.\n" +"0 для вимкнення" msgid "Select printers" msgstr "" @@ -11802,7 +11797,7 @@ msgid "Default color" msgstr "Колір за замовчуванням" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -12395,7 +12390,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -12591,7 +12586,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -13004,9 +12999,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -13015,9 +13010,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -13044,11 +13039,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -13282,8 +13277,8 @@ msgstr "" msgid "Ironing speed" msgstr "Швидкість розглажування" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "Швидкість друку прасувальних ліній" msgid "Ironing angle" msgstr "Кут прасування" @@ -13425,8 +13420,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -13625,7 +13619,7 @@ msgstr "" "мінімального часу шару, визначеного вище, коли увімкнено уповільнення для " "кращого охолодження шару." -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Діаметр сопла" msgid "Configuration notes" @@ -13777,7 +13771,7 @@ msgstr "" "друку іншу швидкість. Для 100%%-вого нависання використовується швидкість " "моста." -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "Філамент для друку стінок" msgid "" @@ -13833,7 +13827,7 @@ msgstr "" msgid "Printer type" msgstr "Тип принтеру" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "Тип принтера" msgid "Printer notes" @@ -14327,7 +14321,7 @@ msgstr "" msgid "Skirt distance" msgstr "Відступ спідниці" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Відстань між спідницею та каймою або моделлю" msgid "Skirt start point" @@ -14451,7 +14445,7 @@ msgstr "" msgid "Solid infill" msgstr "Суцільне заповнення" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "Філамент для друку суцільного заповнення" msgid "" @@ -15333,7 +15327,7 @@ msgstr "Ширина підготовчої вежі" msgid "Wipe tower rotation angle" msgstr "Кут повороту вежі протирання" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Кут повороту вежі протирання за віссю Х." msgid "Width of the brim." @@ -15411,7 +15405,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -16030,7 +16024,7 @@ msgstr "Завантажити користувацький gcode" msgid "Load custom G-code from json." msgstr "Завантажити користувацький код з json" -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "Завантажувати id філаментів" msgid "Load filament IDs for each object." @@ -16069,25 +16063,25 @@ msgstr "" msgid "MakerLab name" msgstr "Назва MakerLab" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "Назва MakerLab для створення цього 3mf" msgid "MakerLab version" msgstr "Версія MakerLab" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "Версія MakerLab для створення цього 3mf" msgid "metadata name list" msgstr "список назв метаданих" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "список назв метаданих додано в 3mf" msgid "metadata value list" msgstr "список значень метаданих" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "список значень метаданих додано в 3mf" msgid "Allow 3mf with newer version to be sliced" @@ -16367,7 +16361,7 @@ msgstr "Номер шару" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "Індекс поточного шару. На одній основі (тобто перший шар номер 1)." -msgid "Layer z" +msgid "Layer Z" msgstr "Шар Z" msgid "" @@ -16376,7 +16370,7 @@ msgid "" msgstr "" "Висота поточного шару над поверхнею стола, виміряна до верхньої частини шару." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "Максимальний шар Z" msgid "Height of the last layer above the print bed." @@ -17832,8 +17826,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -19086,16 +19080,6 @@ msgstr "" #~ msgid "Enable this option to use classic mode." #~ msgstr "Увімкнути цей параметр для використання класичного режиму" -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "Геометрія буде оброблена перед детектуванням гострих кутів. Цей параметр " -#~ "вказує мінімальну довжину відхилення для обробки.\n" -#~ "0 для вимкнення" - #~ msgid "Compatible machine" #~ msgstr "Сумісна машина" @@ -19120,9 +19104,6 @@ msgstr "" #~ msgid "Rotate the solid infill direction by 90° for each layer." #~ msgstr "Повертати напрямок суцільного заповнення на 90° для кожного шару." -#~ msgid "Print speed of ironing lines." -#~ msgstr "Швидкість друку прасувальних ліній" - #~ msgid "" #~ "Flow Compensation Model, used to adjust the flow for small infill areas. " #~ "The model is expressed as a comma separated pair of values for extrusion " @@ -19186,7 +19167,7 @@ msgstr "" #~ msgid "Spacing of interface lines. Zero means solid interface." #~ msgstr "Відстань між лініями підтримки. Нуль означає суцільну підтримку" -#~ msgid "Load filament ids for each object" +#~ msgid "Load filament IDs for each object" #~ msgstr "Завантажувати id філаментів для кожного об'єкта" #~ msgid "" diff --git a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po index ddd8585b3e..0f18e2396f 100644 --- a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po +++ b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po @@ -2977,10 +2977,10 @@ msgstr "步骤" msgid "AMS Slots" msgstr "AMS舱内材料" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3587,7 +3587,7 @@ msgstr "该耗材的推荐喷嘴温度是[%d, %d]摄氏度" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "最大体积流量设置过小\n" "重置为0.5" @@ -3603,12 +3603,12 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "层高过小。将重置为0.2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "熨烫线距过小。将重置为0.1" msgid "" @@ -3703,8 +3703,8 @@ msgstr "" "重置为0。" msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4274,7 +4274,7 @@ msgstr "顺序" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4386,9 +4386,6 @@ msgstr "剖面视图" msgid "Assemble Control" msgstr "拼装视图控制" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5155,11 +5152,6 @@ msgstr "从打印机重新加载文件列表。" msgid "No printers." msgstr "未选择打印机" -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "加载文件列表..." @@ -8868,10 +8860,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -9490,7 +9482,7 @@ msgstr "由打印机结构约束的最大可打印高度" msgid "Preferred orientation" msgstr "零件朝向偏好" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "导入模型时自动旋转到指定的朝向" msgid "Printer preset names" @@ -10158,9 +10150,11 @@ msgstr "圆盘检测半径" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" +"在检测尖锐角度之前，几何形状将被简化。此参数表示简化的最小偏差长度。\n" +"设为0以停用" msgid "Select printers" msgstr "" @@ -10864,7 +10858,7 @@ msgid "Default color" msgstr "缺省颜色" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -11378,7 +11372,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -11554,7 +11548,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -11914,9 +11908,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -11925,9 +11919,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -11954,11 +11948,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -12147,8 +12141,8 @@ msgstr "" msgid "Ironing speed" msgstr "熨烫速度" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "熨烫的打印速度" msgid "Ironing angle" msgstr "熨烫角度" @@ -12282,8 +12276,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -12451,7 +12444,7 @@ msgid "" "is enabled." msgstr "" -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "喷嘴直径" msgid "Configuration notes" @@ -12585,7 +12578,7 @@ msgid "" msgstr "" "检测悬空相对于线宽的百分比，并应用不同的速度打印。100%%的悬空将使用桥接速度。" -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "打印外墙的耗材丝" msgid "" @@ -12634,7 +12627,7 @@ msgstr "" msgid "Printer type" msgstr "打印机类型" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "打印机类型" msgid "Printer notes" @@ -13066,7 +13059,7 @@ msgstr "" msgid "Skirt distance" msgstr "Skirt距离" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "从skirt到模型或者brim的距离" msgid "Skirt start point" @@ -13176,7 +13169,7 @@ msgstr "小于这个阈值的稀疏填充区域将会被内部实心填充替代 msgid "Solid infill" msgstr "实心填充" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "" msgid "" @@ -13949,7 +13942,7 @@ msgstr "擦拭塔宽度" msgid "Wipe tower rotation angle" msgstr "擦拭塔旋转角度" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "擦拭塔相对于x轴的旋转角度" msgid "Width of the brim." @@ -14018,7 +14011,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -14593,7 +14586,7 @@ msgstr "加载自定义G-code" msgid "Load custom G-code from json." msgstr "从json文件加载自定义G-code" -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "" msgid "Load filament IDs for each object." @@ -14628,25 +14621,25 @@ msgstr "" msgid "MakerLab name" msgstr "" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "" msgid "MakerLab version" msgstr "" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "" msgid "metadata name list" msgstr "" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "" msgid "metadata value list" msgstr "" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "" msgid "Allow 3mf with newer version to be sliced" @@ -14894,7 +14887,7 @@ msgstr "层编号" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "当前层编号。从1开始编号（即第一层编号为1）。" -msgid "Layer z" +msgid "Layer Z" msgstr "" msgid "" @@ -14902,7 +14895,7 @@ msgid "" "layer." msgstr "" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "" msgid "Height of the last layer above the print bed." @@ -16259,8 +16252,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -17380,15 +17373,6 @@ msgstr "" #~ msgid "Enable this option to use classic mode." #~ msgstr "启用此选项以使用经典模式" -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "在检测尖锐角度之前，几何形状将被简化。此参数表示简化的最小偏差长度。\n" -#~ "设为0以停用" - #~ msgid "Compatible machine" #~ msgstr "兼容的机器" @@ -17401,21 +17385,12 @@ msgstr "" #~ msgid "Default filament color" #~ msgstr "缺省材料颜色" -#~ msgid "mm³/s" -#~ msgstr "mm³/s" - -#~ msgid "g/cm³" -#~ msgstr "g/cm³" - #~ msgid "Rotate solid infill direction" #~ msgstr "旋转实心填充方向" #~ msgid "Rotate the solid infill direction by 90° for each layer." #~ msgstr "每层都旋转实心填充方向90°。" -#~ msgid "Print speed of ironing lines." -#~ msgstr "熨烫的打印速度" - #~ msgid "" #~ "Flow Compensation Model, used to adjust the flow for small infill areas. " #~ "The model is expressed as a comma separated pair of values for extrusion " diff --git a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po index 094e7cc2ef..b706724090 100644 --- a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po +++ b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po @@ -2984,10 +2984,10 @@ msgstr "步驟" msgid "AMS Slots" msgstr "AMS 槽內線材" -msgid "Left Ams" +msgid "Left AMS" msgstr "" -msgid "Right Ams" +msgid "Right AMS" msgstr "" msgid "" @@ -3591,7 +3591,7 @@ msgstr "該線材的推薦噴嘴溫度是攝氏 [%d, %d] 度" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "最大體積速度設定過小\n" "重設為 0.5" @@ -3607,14 +3607,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "層高過小。\n" "將重設為 0.2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "熨燙線距過小。\n" "將重設為 0.1" @@ -3710,8 +3710,8 @@ msgstr "" "重設為 0。" msgid "" -"lock depth should smaller than skin depth.\n" -"Reset to 50% of skin depth" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" msgid "" @@ -4282,7 +4282,7 @@ msgstr "順序" msgid "object selection" msgstr "" -msgid "part selectiont" +msgid "part selection" msgstr "" msgid "number keys" @@ -4394,9 +4394,6 @@ msgstr "剖面視圖" msgid "Assemble Control" msgstr "拼裝視角控制" -msgid "part selection" -msgstr "" - msgid "Selection Mode" msgstr "" @@ -5165,11 +5162,6 @@ msgstr "從列印機重新載入檔案清單。" msgid "No printers." msgstr "未選擇列印設備。" -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" - msgid "Loading file list..." msgstr "載入檔案清單..." @@ -8908,10 +8900,10 @@ msgstr "" msgid "Air Pump" msgstr "" -msgid "Laser 10w" +msgid "Laser 10 W" msgstr "" -msgid "Laser 40w" +msgid "Laser 40 W" msgstr "" msgid "Cutting Module" @@ -9541,7 +9533,7 @@ msgstr "受列印設備硬體限制的最大可列印高度" msgid "Preferred orientation" msgstr "首選方向" -msgid "Automatically orient stls on the Z-axis upon initial import." +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "匯入 STL 時自動對齊 Z 軸" msgid "Printer preset names" @@ -10260,9 +10252,11 @@ msgstr "耳狀 Brim 偵測半徑" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter " -"indicates the minimum length of the deviation for the decimation. \n" +"indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" +"在偵測尖銳角度之前，幾何形狀將被簡化。此參數表示簡化的最小偏差長度。\n" +"設為 0 以停用" msgid "Select printers" msgstr "" @@ -11042,7 +11036,7 @@ msgid "Default color" msgstr "預設顏色" msgid "" -"Default filament color\n" +"Default filament color.\n" "Right click to reset value to system default." msgstr "" @@ -11568,7 +11562,7 @@ msgid "Default jerk." msgstr "" msgid "" -"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "" msgid "Jerk of outer walls." @@ -11746,7 +11740,7 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the " "fuzzy_skin_thickness parameter not more than the thickness of printed " -"loop.At the same time, the width of the extrusion for a particular layer " +"loop. At the same time, the width of the extrusion for a particular layer " "should also not be below a certain level. It is usually equal 15-25%% of a " "layer height. Therefore, the maximum fuzzy skin thickness with a perimeter " "width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " @@ -12122,9 +12116,9 @@ msgstr "" msgid "" "The remaining part of the model contour after removing a certain depth from " "the surface is called the skeleton. This parameter is used to adjust the " -"density of this section.When two regions have the same sparse infill " +"density of this section. When two regions have the same sparse infill " "settings but different skeleton densities, their skeleton areas will develop " -"overlapping sections.default is as same as infill density." +"overlapping sections. Default is as same as infill density." msgstr "" msgid "Skin infill density" @@ -12133,9 +12127,9 @@ msgstr "" msgid "" "The portion of the model's outer surface within a certain depth range is " "called the skin. This parameter is used to adjust the density of this " -"section.When two regions have the same sparse infill settings but different " -"skin densities, This area will not be split into two separate " -"regions.default is as same as infill density." +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." msgstr "" msgid "Skin infill depth" @@ -12162,11 +12156,11 @@ msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" -msgid "Symmetric infill y axis" +msgid "Symmetric infill Y axis" msgstr "" msgid "" -"If the model has two parts that are symmetric about the y-axis, and you want " +"If the model has two parts that are symmetric about the Y axis, and you want " "these parts to have symmetric textures, please click this option on one of " "the parts." msgstr "" @@ -12379,8 +12373,8 @@ msgstr "與邊緣保持的距離。設定為 0 時，距離將自動設為噴嘴 msgid "Ironing speed" msgstr "熨燙速度" -msgid "Print speed of ironing lines" -msgstr "" +msgid "Print speed of ironing lines." +msgstr "熨燙的列印速度" msgid "Ironing angle" msgstr "熨燙角度" @@ -12515,8 +12509,7 @@ msgid "Maximum Junction Deviation" msgstr "" msgid "" -"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " -"Firmware)" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)" msgstr "" msgid "Minimum speed for extruding" @@ -12679,7 +12672,7 @@ msgstr "" "當啟用了為改善層冷卻而減速的功能時，這個參數設定列印設備能減速到的最低列印速" "度，以確保達到上面設定的最短層時間。" -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "噴嘴直徑" msgid "Configuration notes" @@ -12814,7 +12807,7 @@ msgstr "" "偵測懸空相對於線寬的百分比，並套用不同的速度列印。100%% 的懸空將使用橋接速" "度。" -msgid "Filament to print walls" +msgid "Filament to print walls." msgstr "用於列印牆體的線材" msgid "" @@ -12863,7 +12856,7 @@ msgstr "" msgid "Printer type" msgstr "列印設備類型" -msgid "Type of the printer" +msgid "Type of the printer." msgstr "列印設備類型" msgid "Printer notes" @@ -13296,7 +13289,7 @@ msgstr "" msgid "Skirt distance" msgstr "Skirt 距離" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "從 Skirt 到模型或者 Brim 的距離" msgid "Skirt start point" @@ -13407,7 +13400,7 @@ msgstr "小於設定閾值的稀疏填充區域將替換為內部實心填充" msgid "Solid infill" msgstr "實心填充" -msgid "Filament to print solid infill" +msgid "Filament to print solid infill." msgstr "列印實心填充所使用的線材" msgid "" @@ -14210,7 +14203,7 @@ msgstr "換料塔寬度" msgid "Wipe tower rotation angle" msgstr "換料塔旋轉角度" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "換料塔相對於 x 軸的旋轉角度。" msgid "Width of the brim." @@ -14279,7 +14272,7 @@ msgstr "" msgid "" "Positive values can increase the size of the rib wall, while negative values " -"can reduce the size.However, the size of the rib wall can not be smaller " +"can reduce the size. However, the size of the rib wall can not be smaller " "than that determined by the cleaning volume." msgstr "" @@ -14857,7 +14850,7 @@ msgstr "載入自訂 G-code" msgid "Load custom G-code from json." msgstr "從 json 載入自訂 G-code" -msgid "Load filament ids" +msgid "Load filament IDs" msgstr "載入耗材識別碼" msgid "Load filament IDs for each object." @@ -14892,25 +14885,25 @@ msgstr "忽略 3MF 檔案內來自印表機或耗材預設的已修改 G-code" msgid "MakerLab name" msgstr "MakerLab 名稱" -msgid "MakerLab name to generate this 3mf" +msgid "MakerLab name to generate this 3mf." msgstr "產生此 3MF 檔案時所使用的 MakerLab 名稱" msgid "MakerLab version" msgstr "MakerLab 版本" -msgid "MakerLab version to generate this 3mf" +msgid "MakerLab version to generate this 3mf." msgstr "產生此 3MF 檔案時所使用的 MakerLab 版本" msgid "metadata name list" msgstr "中繼資料名稱清單" -msgid "metadata name list added into 3mf" +msgid "metadata name list added into 3mf." msgstr "新增至 3MF 檔案的中繼資料名稱清單" msgid "metadata value list" msgstr "中繼資料值清單" -msgid "metadata value list added into 3mf" +msgid "metadata value list added into 3mf." msgstr "新增至 3MF 檔案的中繼資料值清單" msgid "Allow 3mf with newer version to be sliced" @@ -15168,7 +15161,7 @@ msgstr "層數" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "當層數 (第一層為一)" -msgid "Layer z" +msgid "Layer Z" msgstr "層 z 高" msgid "" @@ -15176,7 +15169,7 @@ msgid "" "layer." msgstr "目前這一層距離熱床的高度，從層頂開始計算。" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "層的最大 Z 軸高度" msgid "Height of the last layer above the print bed." @@ -16536,8 +16529,8 @@ msgstr "" #, c-format, boost-format msgid "" -"The file: %s \n" -"may have been opened by another program. \n" +"The file: %s\n" +"may have been opened by another program.\n" "Please close it and try again." msgstr "" @@ -17707,15 +17700,6 @@ msgstr "" #~ msgid "Enable this option to use classic mode." #~ msgstr "開啟此選項以使用經典模式" -#~ msgid "" -#~ "The geometry will be decimated before detecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate." -#~ msgstr "" -#~ "在偵測尖銳角度之前，幾何形狀將被簡化。此參數表示簡化的最小偏差長度。\n" -#~ "設為 0 以停用" - #~ msgid "Compatible machine" #~ msgstr "相容的設備" @@ -17728,21 +17712,12 @@ msgstr "" #~ msgid "Default filament color" #~ msgstr "預設線材顏色" -#~ msgid "mm³/s" -#~ msgstr "mm³/s" - -#~ msgid "g/cm³" -#~ msgstr "g/cm³" - #~ msgid "Rotate solid infill direction" #~ msgstr "旋轉實心填充方向" #~ msgid "Rotate the solid infill direction by 90° for each layer." #~ msgstr "每層實心填充的列印方向旋轉 90°。" -#~ msgid "Print speed of ironing lines." -#~ msgstr "熨燙的列印速度" - #~ msgid "" #~ "Flow Compensation Model, used to adjust the flow for small infill areas. " #~ "The model is expressed as a comma separated pair of values for extrusion " @@ -17828,7 +17803,7 @@ msgstr "" #~ msgid "Downward machines settings" #~ msgstr "相容機器設定" -#~ msgid "Load filament ids for each object" +#~ msgid "Load filament IDs for each object" #~ msgstr "載入每個物件的耗材識別碼" #~ msgid "" diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index 989fd6ffe1..491e4f1e13 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -561,7 +561,7 @@ void PrintConfigDef::init_common_params() def = this->add("preferred_orientation", coFloat); def->label = L("Preferred orientation"); - def->tooltip = L("Automatically orient stls on the Z-axis upon initial import."); + def->tooltip = L("Automatically orient stls on the Z axis upon initial import."); def->sidetext = "°"; // degrees, don't need translation def->max = 360; def->min = -360; @@ -1336,9 +1336,9 @@ void PrintConfigDef::init_fff_params() def = this->add("brim_ears_detection_length", coFloat); def->label = L("Brim ear detection radius"); def->category = L("Support"); - def->tooltip = L("The geometry will be decimated before detecting sharp angles. This parameter indicates the " - "minimum length of the deviation for the decimation. " - "\n0 to deactivate."); + def->tooltip = L("The geometry will be decimated before detecting sharp angles. " + "This parameter indicates the minimum length of the deviation for the decimation.\n" + "0 to deactivate."); def->sidetext = "mm"; // milimeters, don't need translation def->min = 0; def->mode = comAdvanced; @@ -1988,8 +1988,8 @@ void PrintConfigDef::init_fff_params() def = this->add("default_filament_colour", coStrings); def->label = L("Default color"); - def->tooltip = L("Default filament color" - "\nRight click to reset value to system default."); + def->tooltip = L("Default filament color.\n" + "Right click to reset value to system default."); def->gui_type = ConfigOptionDef::GUIType::color; def->mode = comAdvanced; def->set_default_value(new ConfigOptionStrings{""}); @@ -2633,7 +2633,7 @@ void PrintConfigDef::init_fff_params() def = this->add("default_junction_deviation", coFloat); def->label = L("Junction Deviation"); - def->tooltip = L("Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)"); + def->tooltip = L("Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)."); def->sidetext = "mm"; // milimeters, don't need translation def->min = 0; def->mode = comAdvanced; @@ -2861,7 +2861,7 @@ void PrintConfigDef::init_fff_params() "This is the fast and straight algorithm without unnecessary nozzle shake that gives a smooth pattern. " "But it is more useful for forming loose walls in the entire they array.\n" "Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the walls is similar to [Displacement] Mode, but it leaves no pores between the perimeters.\n\n" - "Attention! The [Extrusion] and [Combined] modes works only the fuzzy_skin_thickness parameter not more than the thickness of printed loop." + "Attention! The [Extrusion] and [Combined] modes works only the fuzzy_skin_thickness parameter not more than the thickness of printed loop. " "At the same time, the width of the extrusion for a particular layer should also not be below a certain level. " "It is usually equal 15-25%% of a layer height. Therefore, the maximum fuzzy skin thickness with a perimeter width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! " "If you enter a higher parameter than this, the error Flow::spacing() will displayed, and the model will not be sliced. You can choose this number until this error is repeated." ); @@ -3188,7 +3188,7 @@ void PrintConfigDef::init_fff_params() "The template is a comma-separated list of angles in degrees, e.g. '0,90'. " "The first angle is applied to the first layer, the second angle to the second layer, and so on. " "If there are more layers than angles, the angles will be repeated. Note that not all sparse infill patterns support rotation."); - def->sidetext = L("°"); + def->sidetext = "°"; // degrees, don't need translation def->mode = comAdvanced; def->set_default_value(new ConfigOptionString("0,90")); @@ -3200,17 +3200,17 @@ void PrintConfigDef::init_fff_params() "The template is a comma-separated list of angles in degrees, e.g. '0,90'. " "The first angle is applied to the first layer, the second angle to the second layer, and so on. " "If there are more layers than angles, the angles will be repeated. Note that not all solid infill patterns support rotation."); - def->sidetext = L("°"); + def->sidetext = "°"; // degrees, don't need translation def->mode = comAdvanced; def->set_default_value(new ConfigOptionString("0,90")); - def = this->add("skeleton_infill_density", coPercent); def->label = L("Skeleton infill density"); def->category = L("Strength"); - def->tooltip = L("The remaining part of the model contour after removing a certain depth from the surface is called the skeleton. This parameter is used to adjust the density of this section." - "When two regions have the same sparse infill settings but different skeleton densities, their skeleton areas will develop overlapping sections." - "default is as same as infill density."); + def->tooltip = L("The remaining part of the model contour after removing a certain depth from the surface is called the skeleton. " + "This parameter is used to adjust the density of this section. " + "When two regions have the same sparse infill settings but different skeleton densities, their skeleton areas will develop overlapping sections. " + "Default is as same as infill density."); def->sidetext = "%"; def->min = 0; def->max = 100; @@ -3220,9 +3220,10 @@ void PrintConfigDef::init_fff_params() def = this->add("skin_infill_density", coPercent); def->label = L("Skin infill density"); def->category = L("Strength"); - def->tooltip = L("The portion of the model's outer surface within a certain depth range is called the skin. This parameter is used to adjust the density of this section." - "When two regions have the same sparse infill settings but different skin densities, This area will not be split into two separate regions." - "default is as same as infill density."); + def->tooltip = L("The portion of the model's outer surface within a certain depth range is called the skin. " + "This parameter is used to adjust the density of this section. " + "When two regions have the same sparse infill settings but different skin densities, this area will not be split into two separate regions. " + "Default is as same as infill density."); def->sidetext = "%"; def->min = 0; def->max = 100; @@ -3270,9 +3271,9 @@ void PrintConfigDef::init_fff_params() def->set_default_value(new ConfigOptionFloatOrPercent(100, true)); def = this->add("symmetric_infill_y_axis", coBool); - def->label = L("Symmetric infill y axis"); + def->label = L("Symmetric infill Y axis"); def->category = L("Strength"); - def->tooltip = L("If the model has two parts that are symmetric about the y-axis," + def->tooltip = L("If the model has two parts that are symmetric about the Y axis," " and you want these parts to have symmetric textures, please click this option on one of the parts."); def->mode = comAdvanced; def->set_default_value(new ConfigOptionBool(false)); @@ -3509,7 +3510,7 @@ void PrintConfigDef::init_fff_params() def = this->add("ironing_speed", coFloat); def->label = L("Ironing speed"); def->category = L("Quality"); - def->tooltip = L("Print speed of ironing lines"); + def->tooltip = L("Print speed of ironing lines."); def->sidetext = "mm/s"; // milimeters per second, don't need translation def->min = 1; def->mode = comAdvanced; @@ -3674,7 +3675,7 @@ void PrintConfigDef::init_fff_params() def = this->add("machine_max_junction_deviation", coFloats); def->full_label = L("Maximum Junction Deviation"); def->category = L("Machine limits"); - def->tooltip = L("Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)"); + def->tooltip = L("Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware)"); def->sidetext = "mm"; // milimeters, don't need translation def->min = 0; def->mode = comAdvanced; @@ -3860,7 +3861,7 @@ void PrintConfigDef::init_fff_params() def = this->add("nozzle_diameter", coFloats); def->label = L("Nozzle diameter"); - def->tooltip = L("Diameter of nozzle"); + def->tooltip = L("The diameter of nozzle."); def->sidetext = "mm"; // milimeters, don't need translation def->mode = comAdvanced; def->max = 100; @@ -4034,7 +4035,7 @@ void PrintConfigDef::init_fff_params() def->gui_type = ConfigOptionDef::GUIType::i_enum_open; def->label = L("Walls"); def->category = L("Extruders"); - def->tooltip = L("Filament to print walls"); + def->tooltip = L("Filament to print walls."); def->min = 1; def->mode = comAdvanced; def->set_default_value(new ConfigOptionInt(1)); @@ -4093,7 +4094,7 @@ void PrintConfigDef::init_fff_params() def = this->add("printer_model", coString); def->label = L("Printer type"); - def->tooltip = L("Type of the printer"); + def->tooltip = L("Type of the printer."); def->set_default_value(new ConfigOptionString()); def->cli = ConfigOptionDef::nocli; @@ -4536,10 +4537,10 @@ void PrintConfigDef::init_fff_params() def->min = 0; def->mode = comAdvanced; def->set_default_value(new ConfigOptionFloatOrPercent(80,true)); - + def = this->add("skirt_distance", coFloat); def->label = L("Skirt distance"); - def->tooltip = L("Distance from skirt to brim or object"); + def->tooltip = L("The distance from the skirt to the brim or the object."); def->sidetext = "mm"; // milimeters, don't need translation def->min = 0; def->max = 60; @@ -4648,7 +4649,7 @@ void PrintConfigDef::init_fff_params() def->gui_type = ConfigOptionDef::GUIType::i_enum_open; def->label = L("Solid infill"); def->category = L("Extruders"); - def->tooltip = L("Filament to print solid infill"); + def->tooltip = L("Filament to print solid infill."); def->min = 1; def->mode = comAdvanced; def->set_default_value(new ConfigOptionInt(1)); @@ -5664,7 +5665,7 @@ void PrintConfigDef::init_fff_params() def = this->add("wipe_tower_rotation_angle", coFloat); def->label = L("Wipe tower rotation angle"); - def->tooltip = L("Wipe tower rotation angle with respect to x-axis."); + def->tooltip = L("Wipe tower rotation angle with respect to X axis."); def->sidetext = "°"; // degrees, don't need translation def->mode = comAdvanced; def->set_default_value(new ConfigOptionFloat(0.)); @@ -5718,7 +5719,7 @@ void PrintConfigDef::init_fff_params() def = this->add("wipe_tower_extra_rib_length", coFloat); def->label = L("Extra rib length"); - def->tooltip = L("Positive values can increase the size of the rib wall, while negative values can reduce the size." + def->tooltip = L("Positive values can increase the size of the rib wall, while negative values can reduce the size. " "However, the size of the rib wall can not be smaller than that determined by the cleaning volume."); def->sidetext = "mm"; // milimeters, don't need translation def->max = 300; @@ -5727,7 +5728,7 @@ void PrintConfigDef::init_fff_params() def = this->add("wipe_tower_rib_width", coFloat); def->label = L("Rib width"); - def->tooltip = L("Rib width"); + def->tooltip = L("Rib width."); def->sidetext = "mm"; // milimeters, don't need translation def->mode = comAdvanced; def->min = 0; @@ -8006,7 +8007,7 @@ CLIMiscConfigDef::CLIMiscConfigDef() def->set_default_value(new ConfigOptionString()); def = this->add("load_filament_ids", coInts); - def->label = L("Load filament ids"); + def->label = L("Load filament IDs"); def->tooltip = L("Load filament IDs for each object."); def->cli_params = "\"1,2,3,1\""; def->set_default_value(new ConfigOptionInts()); @@ -8034,25 +8035,25 @@ CLIMiscConfigDef::CLIMiscConfigDef() def = this->add("makerlab_name", coString); def->label = L("MakerLab name"); - def->tooltip = L("MakerLab name to generate this 3mf"); + def->tooltip = L("MakerLab name to generate this 3mf."); def->cli_params = "name"; def->set_default_value(new ConfigOptionString()); def = this->add("makerlab_version", coString); def->label = L("MakerLab version"); - def->tooltip = L("MakerLab version to generate this 3mf"); + def->tooltip = L("MakerLab version to generate this 3mf."); def->cli_params = "version"; def->set_default_value(new ConfigOptionString()); def = this->add("metadata_name", coStrings); def->label = L("metadata name list"); - def->tooltip = L("metadata name list added into 3mf"); + def->tooltip = L("metadata name list added into 3mf."); def->cli_params = "\"name1;name2;...\""; def->set_default_value(new ConfigOptionStrings()); def = this->add("metadata_value", coStrings); def->label = L("metadata value list"); - def->tooltip = L("metadata value list added into 3mf"); + def->tooltip = L("metadata value list added into 3mf."); def->cli_params = "\"value1;value2;...\""; def->set_default_value(new ConfigOptionStrings()); @@ -8402,11 +8403,11 @@ CustomGcodeSpecificConfigDef::CustomGcodeSpecificConfigDef() def->tooltip = L("Index of the current layer. One-based (i.e. first layer is number 1)."); def = this->add("layer_z", coFloat); - def->label = L("Layer z"); + def->label = L("Layer Z"); def->tooltip = L("Height of the current layer above the print bed, measured to the top of the layer."); def = this->add("max_layer_z", coFloat); - def->label = L("Maximal layer z"); + def->label = L("Maximal layer Z"); def->tooltip = L("Height of the last layer above the print bed."); def = this->add("filament_extruder_id", coInt); @@ -8416,32 +8417,32 @@ CustomGcodeSpecificConfigDef::CustomGcodeSpecificConfigDef() // change_filament_gcode new_def("previous_extruder", coInt, "Previous extruder", "Index of the extruder that is being unloaded. The index is zero based (first extruder has index 0)."); new_def("next_extruder", coInt, "Next extruder", "Index of the extruder that is being loaded. The index is zero based (first extruder has index 0)."); - new_def("relative_e_axis", coBool, "Relative e-axis", "Indicates if relative positioning is being used"); - new_def("toolchange_count", coInt, "Toolchange count", "The number of toolchanges throught the print"); + new_def("relative_e_axis", coBool, "Relative e-axis", "Indicates if relative positioning is being used."); + new_def("toolchange_count", coInt, "Toolchange count", "The number of toolchanges throught the print."); new_def("fan_speed", coNone, "", ""); //Option is no longer used and is zeroed by placeholder parser for compatability - new_def("old_retract_length", coFloat, "Old retract length", "The retraction length of the previous filament"); - new_def("new_retract_length", coFloat, "New retract length", "The retraction lenght of the new filament"); - new_def("old_retract_length_toolchange", coFloat, "Old retract length toolchange", "The toolchange retraction length of the previous filament"); - new_def("new_retract_length_toolchange", coFloat, "New retract length toolchange", "The toolchange retraction length of the new filament"); - new_def("old_filament_temp", coInt, "Old filament temp", "The old filament temp"); - new_def("new_filament_temp", coInt, "New filament temp", "The new filament temp"); - new_def("x_after_toolchange", coFloat, "X after toolchange", "The x pos after toolchange"); - new_def("y_after_toolchange", coFloat, "Y after toolchange", "The y pos after toolchange"); - new_def("z_after_toolchange", coFloat, "Z after toolchange", "The z pos after toolchange"); - new_def("first_flush_volume", coFloat, "First flush volume", "The first flush volume"); - new_def("second_flush_volume", coFloat, "Second flush volume", "The second flush volume"); - new_def("old_filament_e_feedrate", coInt, "Old filament e feedrate", "The old filament extruder feedrate"); - new_def("new_filament_e_feedrate", coInt, "New filament e feedrate", "The new filament extruder feedrate"); - new_def("travel_point_1_x", coFloat, "Travel point 1 x", "The travel point 1 x"); - new_def("travel_point_1_y", coFloat, "Travel point 1 y", "The travel point 1 y"); - new_def("travel_point_2_x", coFloat, "Travel point 2 x", "The travel point 2 x"); - new_def("travel_point_2_y", coFloat, "Travel point 2 y", "The travel point 2 y"); - new_def("travel_point_3_x", coFloat, "Travel point 3 x", "The travel point 3 x"); - new_def("travel_point_3_y", coFloat, "Travel point 3 y", "The travel point 3 y"); - new_def("flush_length_1", coFloat, "Flush Length 1", "The first flush length"); - new_def("flush_length_2", coFloat, "Flush Length 2", "The second flush length"); - new_def("flush_length_3", coFloat, "Flush Length 3", "The third flush length"); - new_def("flush_length_4", coFloat, "Flush Length 4", "The fourth flush length"); + new_def("old_retract_length", coFloat, "Old retract length", "The retraction length of the previous filament."); + new_def("new_retract_length", coFloat, "New retract length", "The retraction lenght of the new filament."); + new_def("old_retract_length_toolchange", coFloat, "Old retract length toolchange", "The toolchange retraction length of the previous filament."); + new_def("new_retract_length_toolchange", coFloat, "New retract length toolchange", "The toolchange retraction length of the new filament."); + new_def("old_filament_temp", coInt, "Old filament temp", "The old filament temp."); + new_def("new_filament_temp", coInt, "New filament temp", "The new filament temp."); + new_def("x_after_toolchange", coFloat, "X after toolchange", "The X pos after toolchange."); + new_def("y_after_toolchange", coFloat, "Y after toolchange", "The Y pos after toolchange."); + new_def("z_after_toolchange", coFloat, "Z after toolchange", "The Z pos after toolchange."); + new_def("first_flush_volume", coFloat, "First flush volume", "The first flush volume."); + new_def("second_flush_volume", coFloat, "Second flush volume", "The second flush volume."); + new_def("old_filament_e_feedrate", coInt, "Old filament e feedrate", "The old filament extruder feedrate."); + new_def("new_filament_e_feedrate", coInt, "New filament e feedrate", "The new filament extruder feedrate."); + new_def("travel_point_1_x", coFloat, "Travel point 1 X", "The travel point 1 X."); + new_def("travel_point_1_y", coFloat, "Travel point 1 Y", "The travel point 1 Y."); + new_def("travel_point_2_x", coFloat, "Travel point 2 X", "The travel point 2 X."); + new_def("travel_point_2_y", coFloat, "Travel point 2 Y", "The travel point 2 Y."); + new_def("travel_point_3_x", coFloat, "Travel point 3 X", "The travel point 3 X."); + new_def("travel_point_3_y", coFloat, "Travel point 3 Y", "The travel point 3 Y."); + new_def("flush_length_1", coFloat, "Flush Length 1", "The first flush length."); + new_def("flush_length_2", coFloat, "Flush Length 2", "The second flush length."); + new_def("flush_length_3", coFloat, "Flush Length 3", "The third flush length."); + new_def("flush_length_4", coFloat, "Flush Length 4", "The fourth flush length."); // change_extrusion_role_gcode std::string extrusion_role_types = "Possible Values:\n[\"Perimeter\", \"ExternalPerimeter\", " diff --git a/src/slic3r/GUI/AmsMappingPopup.cpp b/src/slic3r/GUI/AmsMappingPopup.cpp index ca73bacd86..4d68e574ee 100644 --- a/src/slic3r/GUI/AmsMappingPopup.cpp +++ b/src/slic3r/GUI/AmsMappingPopup.cpp @@ -318,8 +318,8 @@ void MaterialItem::doRender(wxDC &dc) title_panel->Layout(); title_panel->Fit(); - auto left_ams_title_text = new wxStaticText(this, wxID_ANY, _L("Left Ams")); - auto right_ams_title_text = new wxStaticText(this, wxID_ANY, _L("Right Ams")); + auto left_ams_title_text = new wxStaticText(this, wxID_ANY, _L("Left AMS")); + auto right_ams_title_text = new wxStaticText(this, wxID_ANY, _L("Right AMS")); m_sizer_ams_left->Add(left_ams_title_text, 0, wxALIGN_CENTER, 0); m_sizer_ams_right->Add(right_ams_title_text, 0, wxALIGN_CENTER, 0); diff --git a/src/slic3r/GUI/ConfigManipulation.cpp b/src/slic3r/GUI/ConfigManipulation.cpp index 3cd70d5d8a..e9f51f7134 100644 --- a/src/slic3r/GUI/ConfigManipulation.cpp +++ b/src/slic3r/GUI/ConfigManipulation.cpp @@ -131,7 +131,7 @@ void ConfigManipulation::check_filament_max_volumetric_speed(DynamicPrintConfig float max_volumetric_speed = config->has("filament_max_volumetric_speed") ? config->opt_float("filament_max_volumetric_speed", (float) 0.5) : 0.5; // BBS: limite the min max_volumetric_speed if (max_volumetric_speed < 0.5) { - const wxString msg_text = _(L("Too small max volumetric speed.\nReset to 0.5")); + const wxString msg_text = _(L("Too small max volumetric speed.\nReset to 0.5.")); MessageDialog dialog(nullptr, msg_text, "", wxICON_WARNING | wxOK); DynamicPrintConfig new_conf = *config; is_msg_dlg_already_exist = true; @@ -188,7 +188,7 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con auto gpreset = GUI::wxGetApp().preset_bundle->printers.get_edited_preset(); if (layer_height < EPSILON) { - const wxString msg_text = _(L("Too small layer height.\nReset to 0.2")); + const wxString msg_text = _(L("Too small layer height.\nReset to 0.2.")); MessageDialog dialog(m_msg_dlg_parent, msg_text, "", wxICON_WARNING | wxOK); DynamicPrintConfig new_conf = *config; is_msg_dlg_already_exist = true; @@ -202,7 +202,7 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con auto max_lh = gpreset.config.opt_float("max_layer_height",0); if (max_lh > 0.2 && layer_height > max_lh+ EPSILON) { - const wxString msg_text = wxString::Format(L"Too large layer height.\nReset to %0.3f", max_lh); + const wxString msg_text = wxString::Format(L"Too large layer height.\nReset to %0.3f.", max_lh); MessageDialog dialog(nullptr, msg_text, "", wxICON_WARNING | wxOK); DynamicPrintConfig new_conf = *config; is_msg_dlg_already_exist = true; @@ -215,7 +215,7 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con //BBS: ironing_spacing shouldn't be too small or equal to zero if (config->opt_float("ironing_spacing") < 0.05) { - const wxString msg_text = _(L("Too small ironing spacing.\nReset to 0.1")); + const wxString msg_text = _(L("Too small ironing spacing.\nReset to 0.1.")); MessageDialog dialog(nullptr, msg_text, "", wxICON_WARNING | wxOK); DynamicPrintConfig new_conf = *config; is_msg_dlg_already_exist = true; @@ -226,7 +226,7 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con } if (config->opt_float("support_ironing_spacing") < 0.05) { - const wxString msg_text = _(L("Too small ironing spacing.\nReset to 0.1")); + const wxString msg_text = _(L("Too small ironing spacing.\nReset to 0.1.")); MessageDialog dialog(nullptr, msg_text, "", wxICON_WARNING | wxOK); DynamicPrintConfig new_conf = *config; is_msg_dlg_already_exist = true; @@ -477,7 +477,7 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con // layer_height shouldn't be equal to zero float skin_depth = config->opt_float("skin_infill_depth"); if (config->opt_float("infill_lock_depth") > skin_depth) { - const wxString msg_text = _(L("lock depth should smaller than skin depth.\nReset to 50% of skin depth")); + const wxString msg_text = _(L("Lock depth should smaller than skin depth.\nReset to 50% of skin depth.")); MessageDialog dialog(m_msg_dlg_parent, msg_text, "", wxICON_WARNING | wxOK); DynamicPrintConfig new_conf = *config; is_msg_dlg_already_exist = true; diff --git a/src/slic3r/GUI/CreatePresetsDialog.cpp b/src/slic3r/GUI/CreatePresetsDialog.cpp index 2711ffaa17..ceb7a5bb5e 100644 --- a/src/slic3r/GUI/CreatePresetsDialog.cpp +++ b/src/slic3r/GUI/CreatePresetsDialog.cpp @@ -3441,7 +3441,7 @@ std::string ExportConfigsDialog::initial_file_name(const wxString &path, const s } catch(...) { MessageDialog dlg(this, - wxString::Format(_L("The file: %s \nmay have been opened by another program. \nPlease close it and try again."), + wxString::Format(_L("The file: %s\nmay have been opened by another program.\nPlease close it and try again."), encode_path(printer_export_path.string().c_str())), wxString(SLIC3R_APP_FULL_NAME) + " - " + _L("Info"), wxYES | wxYES_DEFAULT | wxCENTRE); dlg.ShowModal(); diff --git a/src/slic3r/GUI/GLCanvas3D.cpp b/src/slic3r/GUI/GLCanvas3D.cpp index 90678a58f0..3585c411b9 100644 --- a/src/slic3r/GUI/GLCanvas3D.cpp +++ b/src/slic3r/GUI/GLCanvas3D.cpp @@ -1171,7 +1171,7 @@ GLCanvas3D::GLCanvas3D(wxGLCanvas* canvas, Bed3D &bed) m_assembly_view_desc["object_selection_caption"] = _L("Left mouse button"); m_assembly_view_desc["object_selection"] = _L("object selection"); m_assembly_view_desc["part_selection_caption"] = "Alt +" + _L("Left mouse button"); - m_assembly_view_desc["part_selection"] = _L("part selectiont"); + m_assembly_view_desc["part_selection"] = _L("part selection"); m_assembly_view_desc["number_key_caption"] = "1~16 " + _L("number keys"); m_assembly_view_desc["number_key"] = _L("number keys can quickly change the color of objects"); } diff --git a/src/slic3r/GUI/MediaFilePanel.cpp b/src/slic3r/GUI/MediaFilePanel.cpp index 612ebb8848..9a7b4386e6 100644 --- a/src/slic3r/GUI/MediaFilePanel.cpp +++ b/src/slic3r/GUI/MediaFilePanel.cpp @@ -296,7 +296,7 @@ void MediaFilePanel::SetMachineObject(MachineObject* obj) switch (status) { case PrinterFileSystem::Initializing: icon = m_bmp_loading; msg = _L("Initializing..."); break; case PrinterFileSystem::Connecting: icon = m_bmp_loading; msg = _L("Connecting..."); break; - case PrinterFileSystem::Failed: icon = m_bmp_failed; if (extra != 1) msg = _L("Please check the network and try again, You can restart or update the printer if the issue persists."); break; + case PrinterFileSystem::Failed: icon = m_bmp_failed; if (extra != 1) msg = _L("Please check the network and try again. You can restart or update the printer if the issue persists."); break; case PrinterFileSystem::ListSyncing: icon = m_bmp_loading; msg = _L("Loading file list..."); break; case PrinterFileSystem::ListReady: icon = extra == 0 ? m_bmp_empty : m_bmp_failed; msg = extra == 0 ? _L("No files") : _L("Load failed"); break; } diff --git a/src/slic3r/GUI/UpgradePanel.cpp b/src/slic3r/GUI/UpgradePanel.cpp index 71b4b31302..2c4107ca87 100644 --- a/src/slic3r/GUI/UpgradePanel.cpp +++ b/src/slic3r/GUI/UpgradePanel.cpp @@ -18,8 +18,8 @@ static const std::unordered_map ACCESSORY_DISPLAY_STR = { {"N3F", "AMS 2 PRO"}, {"N3S", "AMS HT"}, {"O2L_PC", L("Air Pump")}, - {"O2L_10B", L("Laser 10w")}, - {"O2L_40B", L("Laser 40w")}, + {"O2L_10B", L("Laser 10 W")}, + {"O2L_40B", L("Laser 40 W")}, {"O2L_PCM", L("Cutting Module")}, {"O2L_ACM", "Active Cutting Module"}, {"O2L_UCM", "Ultrasonic Cutting Module"},