ENH: Add Textured PEI Plate

Change-Id: I08178e86a8ccb23844cca00bc9d265df7507f910
(cherry picked from commit 8f101963ecab1352e2721ead83928b327d6c0dbd)

resources/profiles/BBL/filament/Bambu Support W @base.json

@@ -20,12 +20,18 @@
     "hot_plate_temp": [
         "40"
     ],
+    "textured_plate_temp": [
+        "40"
+    ],
     "cool_plate_temp_initial_layer": [
         "40"
     ],
     "hot_plate_temp_initial_layer": [
         "40"
     ],
+    "textured_plate_temp_initial_layer": [
+        "40"
+    ],
     "filament_cost": [
         "29.99"
     ],

resources/profiles/BBL/filament/fdm_filament_abs.json

@@ -13,6 +13,9 @@
     "hot_plate_temp" : [
         "90"
     ],
+    "textured_plate_temp" : [
+        "90"
+    ],
     "cool_plate_temp_initial_layer" : [
         "90"
     ],
@@ -22,6 +25,9 @@
     "hot_plate_temp_initial_layer" : [
         "90"
     ],
+    "textured_plate_temp_initial_layer" : [
+        "90"
+    ],
     "slow_down_for_layer_cooling": [
         "1"
     ],

resources/profiles/BBL/filament/fdm_filament_asa.json

@@ -13,6 +13,9 @@
     "hot_plate_temp" : [
         "90"
     ],
+    "textured_plate_temp" : [
+        "90"
+    ],
     "cool_plate_temp_initial_layer" : [
         "90"
     ],
@@ -22,6 +25,9 @@
     "hot_plate_temp_initial_layer" : [
         "90"
     ],
+    "textured_plate_temp_initial_layer" : [
+        "90"
+    ],
     "slow_down_for_layer_cooling": [
         "1"
     ],

resources/profiles/BBL/filament/fdm_filament_common.json

@@ -12,6 +12,9 @@
     "hot_plate_temp" : [
         "60"
     ],
+    "textured_plate_temp" : [
+        "60"
+    ],
     "cool_plate_temp_initial_layer" : [
         "60"
     ],
@@ -21,6 +24,9 @@
     "hot_plate_temp_initial_layer" : [
         "60"
     ],
+    "textured_plate_temp_initial_layer" : [
+        "60"
+    ],
     "overhang_fan_threshold": [
         "95%"
     ],

resources/profiles/BBL/filament/fdm_filament_pa.json

@@ -13,6 +13,9 @@
     "hot_plate_temp" : [
         "100"
     ],
+    "textured_plate_temp" : [
+        "100"
+    ],
     "cool_plate_temp_initial_layer" : [
         "0"
     ],
@@ -22,6 +25,9 @@
     "hot_plate_temp_initial_layer" : [
         "100"
     ],
+    "textured_plate_temp_initial_layer" : [
+        "100"
+    ],
     "slow_down_for_layer_cooling": [
         "1"
     ],

resources/profiles/BBL/filament/fdm_filament_pc.json

@@ -13,6 +13,9 @@
     "hot_plate_temp" : [
         "110"
     ],
+    "textured_plate_temp" : [
+        "110"
+    ],
     "cool_plate_temp_initial_layer" : [
         "0"
     ],
@@ -22,6 +25,9 @@
     "hot_plate_temp_initial_layer" : [
         "110"
     ],
+    "textured_plate_temp_initial_layer" : [
+        "110"
+    ],
     "slow_down_for_layer_cooling": [
         "1"
     ],

resources/profiles/BBL/filament/fdm_filament_pet.json

@@ -13,6 +13,9 @@
     "hot_plate_temp" : [
         "80"
     ],
+    "textured_plate_temp" : [
+        "80"
+    ],
     "cool_plate_temp_initial_layer" : [
         "60"
     ],
@@ -22,6 +25,9 @@
     "hot_plate_temp_initial_layer" : [
         "80"
     ],
+    "textured_plate_temp_initial_layer" : [
+        "80"
+    ],
     "slow_down_for_layer_cooling": [
         "1"
     ],

resources/profiles/BBL/filament/fdm_filament_pla.json

@@ -28,6 +28,9 @@
     "hot_plate_temp" : [
         "45"
     ],
+    "textured_plate_temp" : [
+        "45"
+    ],
     "cool_plate_temp_initial_layer" : [
         "35"
     ],
@@ -37,6 +40,9 @@
     "hot_plate_temp_initial_layer" : [
         "45"
     ],
+    "textured_plate_temp_initial_layer" : [
+        "45"
+    ],
     "nozzle_temperature_initial_layer": [
         "220"
     ],

resources/profiles/BBL/filament/fdm_filament_pva.json

@@ -13,6 +13,9 @@
     "hot_plate_temp" : [
         "45"
     ],
+    "textured_plate_temp" : [
+        "45"
+    ],
     "cool_plate_temp_initial_layer" : [
         "35"
     ],
@@ -22,6 +25,9 @@
     "hot_plate_temp_initial_layer" : [
         "45"
     ],
+    "textured_plate_temp_initial_layer" : [
+        "45"
+    ],
     "fan_cooling_layer_time": [
         "100"
     ],

resources/profiles/BBL/filament/fdm_filament_tpu.json

@@ -13,6 +13,9 @@
     "hot_plate_temp" : [
         "35"
     ],
+    "textured_plate_temp" : [
+        "35"
+    ],
     "cool_plate_temp_initial_layer" : [
         "30"
     ],
@@ -22,6 +25,9 @@
     "hot_plate_temp_initial_layer" : [
         "35"
     ],
+    "textured_plate_temp_initial_layer" : [
+        "35"
+    ],
     "fan_cooling_layer_time": [
         "100"
     ],

src/libslic3r/GCode.cpp

@@ -1262,6 +1262,7 @@ enum BambuBedType {
     bbtCoolPlate = 1,
     bbtEngineeringPlate = 2,
     bbtHighTemperaturePlate = 3,
+    bbtTexturedPEIPlate         = 4,
 };
 
 static BambuBedType to_bambu_bed_type(BedType type)
@@ -1273,6 +1274,8 @@ static BambuBedType to_bambu_bed_type(BedType type)
         bambu_bed_type = bbtEngineeringPlate;
     else if (type == btPEI)
         bambu_bed_type = bbtHighTemperaturePlate;
+    else if (type == btPTE)
+        bambu_bed_type = bbtTexturedPEIPlate;
 
     return bambu_bed_type;
 }

src/libslic3r/Preset.cpp

@@ -691,7 +691,7 @@ static std::vector<std::string> s_Preset_filament_options {
     "filament_flow_ratio", "filament_density", "filament_cost", "filament_minimal_purge_on_wipe_tower",
     "nozzle_temperature", "nozzle_temperature_initial_layer",
     // BBS
-    "cool_plate_temp", "eng_plate_temp", "hot_plate_temp", "cool_plate_temp_initial_layer", "eng_plate_temp_initial_layer", "hot_plate_temp_initial_layer",
+    "cool_plate_temp", "eng_plate_temp", "hot_plate_temp", "textured_plate_temp", "cool_plate_temp_initial_layer", "eng_plate_temp_initial_layer", "hot_plate_temp_initial_layer","textured_plate_temp_initial_layer",
     // "bed_type",
     //BBS:temperature_vitrification
     "temperature_vitrification", "reduce_fan_stop_start_freq", "slow_down_for_layer_cooling", "fan_min_speed",

src/libslic3r/Print.cpp

@@ -96,6 +96,7 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
         "cool_plate_temp_initial_layer",
         "eng_plate_temp_initial_layer",
         "hot_plate_temp_initial_layer",
+        "textured_plate_temp_initial_layer",
         "gcode_add_line_number",
         "layer_change_gcode",
         "fan_min_speed",
@@ -173,6 +174,7 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
             || opt_key == "cool_plate_temp"
             || opt_key == "eng_plate_temp"
             || opt_key == "hot_plate_temp"
+            || opt_key == "textured_plate_temp"
             || opt_key == "enable_prime_tower"
             || opt_key == "prime_tower_width"
             || opt_key == "prime_tower_brim_width"

src/libslic3r/PrintConfig.cpp

@@ -213,7 +213,8 @@ static const t_config_enum_values s_keys_map_OverhangFanThreshold = {
 static const t_config_enum_values s_keys_map_BedType = {
     { "Cool Plate",         btPC },
     { "Engineering Plate",  btEP  },
-    { "High Temp Plate",    btPEI  }
+    { "High Temp Plate",    btPEI  },
+    { "Textured PEI Plate",      btPTE }
 };
 CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(BedType)
 
@@ -367,6 +368,16 @@ void PrintConfigDef::init_fff_params()
     def->max = 120;
     def->set_default_value(new ConfigOptionInts{ 45 });
 
+    def             = this->add("textured_plate_temp", coInts);
+    def->label      = L("Other layers");
+    def->tooltip    = L("Bed temperature for layers except the initial one. "
+                     "Value 0 means the filament does not support to print on the Textured PEI Plate");
+    def->sidetext   = L("°C");
+    def->full_label = L("Bed temperature");
+    def->min        = 0;
+    def->max        = 120;
+    def->set_default_value(new ConfigOptionInts{45});
+
     def = this->add("cool_plate_temp_initial_layer", coInts);
     def->label = L("Initial layer");
     def->full_label = L("Initial layer bed temperature");
@@ -397,6 +408,15 @@ void PrintConfigDef::init_fff_params()
     def->max = 120;
     def->set_default_value(new ConfigOptionInts{ 45 });
 
+    def             = this->add("textured_plate_temp_initial_layer", coInts);
+    def->label      = L("Initial layer");
+    def->full_label = L("Initial layer bed temperature");
+    def->tooltip    = L("Bed temperature of the initial layer. "
+                     "Value 0 means the filament does not support to print on the Textured PEI Plate");
+    def->sidetext   = L("°C");
+    def->max        = 0;
+    def->max        = 120;
+    def->set_default_value(new ConfigOptionInts{45});
 
     def = this->add("curr_bed_type", coEnums);
     def->label = L("Bed type");
@@ -406,9 +426,11 @@ void PrintConfigDef::init_fff_params()
     def->enum_values.emplace_back("Cool Plate");
     def->enum_values.emplace_back("Engineering Plate");
     def->enum_values.emplace_back("High Temp Plate");
+    def->enum_values.emplace_back("Textured PEI Plate");
     def->enum_labels.emplace_back(L("Cool Plate"));
     def->enum_labels.emplace_back(L("Engineering Plate"));
     def->enum_labels.emplace_back(L("High Temp Plate"));
+    def->enum_labels.emplace_back(L("Textured PEI Plate"));
     def->set_default_value(new ConfigOptionEnum<BedType>(btPC));
 
     def = this->add("before_layer_change_gcode", coString);
@@ -2283,8 +2305,7 @@ void PrintConfigDef::init_fff_params()
     def = this->add("independent_support_layer_height", coBool);
     def->label = L("Independent support layer height");
     def->category = L("Support");
-    def->tooltip = L("Support layer uses layer height independent with object layer. This is to support custom support gap,"
+    def->tooltip = L("Support layer uses layer height independent with object layer. This is to support customizing z-gap and save print time.");
-                   "but may cause extra filament switches if support is specified as different extruder with object");
     def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionBool(true));
 

src/libslic3r/PrintConfig.hpp

@@ -152,6 +152,7 @@ enum BedType {
     btPC = 0,
     btEP,
     btPEI,
+    btPTE,
     btCount
 };
 
@@ -177,6 +178,8 @@ static std::string bed_type_to_gcode_string(const BedType type)
     case btPEI:
         type_str = "high_temp_plate";
         break;
+    case btPTE:
+        type_str = "frosted_plate";
     default:
         type_str = "unknown";
         break;
@@ -196,6 +199,9 @@ static std::string get_bed_temp_key(const BedType type)
     if (type == btPEI)
         return "hot_plate_temp";
 
+    if (type == btPTE)
+        return "textured_plate_temp";
+
     return "";
 }
 
@@ -210,6 +216,9 @@ static std::string get_bed_temp_1st_layer_key(const BedType type)
     if (type == btPEI)
         return "hot_plate_temp_initial_layer";
 
+    if (type == btPTE)
+        return "textured_plate_temp_initial_layer";
+
     return "";
 }
 
@@ -774,9 +783,11 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
     ((ConfigOptionInts,               cool_plate_temp))
     ((ConfigOptionInts,               eng_plate_temp))
     ((ConfigOptionInts,               hot_plate_temp)) // hot is short for high temperature
+    ((ConfigOptionInts,               textured_plate_temp))
     ((ConfigOptionInts,               cool_plate_temp_initial_layer))
     ((ConfigOptionInts,               eng_plate_temp_initial_layer))
     ((ConfigOptionInts,               hot_plate_temp_initial_layer)) // hot is short for high temperature
+    ((ConfigOptionInts,               textured_plate_temp_initial_layer))
     ((ConfigOptionBools,              enable_overhang_bridge_fan))
     ((ConfigOptionInts,               overhang_fan_speed))
     ((ConfigOptionEnumsGeneric,       overhang_fan_threshold))

src/slic3r/GUI/Tab.cpp

@@ -2468,6 +2468,11 @@ void TabFilament::build()
         line.append_option(optgroup->get_option("hot_plate_temp"));
         optgroup->append_line(line);
 
+        line = {L("Textured PEI Plate"), L("Bed temperature when Textured PEI Plate is installed. Value 0 means the filament does not support to print on the Textured PEI Plate")};
+        line.append_option(optgroup->get_option("textured_plate_temp_initial_layer"));
+        line.append_option(optgroup->get_option("textured_plate_temp"));
+        optgroup->append_line(line);
+
         optgroup->m_on_change = [this, optgroup](t_config_option_key opt_key, boost::any value)
         {
             DynamicPrintConfig& filament_config = wxGetApp().preset_bundle->filaments.get_edited_preset().config;
@@ -2482,6 +2487,9 @@ void TabFilament::build()
             else if (opt_key == "hot_plate_temp" || opt_key == "hot_plate_temp_initial_layer") {
                 m_config_manipulation.check_bed_temperature_difference(BedType::btPEI, &filament_config);
             }
+            else if (opt_key == "textured_plate_temp" || opt_key == "textured_plate_temp_initial_layer") {
+                m_config_manipulation.check_bed_temperature_difference(BedType::btPTE, &filament_config);
+            }
             else if (opt_key == "nozzle_temperature") {
                 m_config_manipulation.check_nozzle_temperature_range(&filament_config);
             }