3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-16 11:17:51 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 1

minor change: use [bed_temperature_initial_layer_single] instead of [hot_plate_temp_initial_layer] for some profiles

Browse source
This commit is contained in:
SoftFever 2023-05-10 22:48:12 +08:00
parent 79a43da863
commit 08a94681ca
14 changed files with 14 additions and 14 deletions
Download patch file Download diff file Expand all files Collapse all files

2
resources/profiles/Artillery/machine/Artillery Genius 0.4 nozzle.json
View file

@ -106,7 +106,7 @@
"default_filament_profile": [
"Artillery Generic PLA"
],
"machine_start_gcode": "M83; extruder relative mode\nG28; home all axes\nM109 S[nozzle_temperature_initial_layer]; hotend temperature\nM140 S[hot_plate_temp_initial_layer]; heatbed temperature\nM190 S[hot_plate_temp_initial_layer]; wait for the bed to heat up\nM109 S[nozzle_temperature_initial_layer]; wait for the extruder to heat up\nG92 E0; reset extruder\nG1 X20 Y5 Z0.3 F5000.0; move to start-line position\nG1 Z0.3 F1000; print height\nG1 X200 Y5 F1500.0 E15; draw 1st line\nG1 X200 Y5.3 Z0.3 F5000.0; move to side a little\nG1 X5.3 Y5.3 Z0.3 F1500.0 E30; draw 2nd line\nG1 Z3 F3000; move z up little to prevent scratching of surface",
"machine_start_gcode": "M83; extruder relative mode\nG28; home all axes\nM109 S[nozzle_temperature_initial_layer]; hotend temperature\nM140 S[bed_temperature_initial_layer_single]; heatbed temperature\nM190 S[bed_temperature_initial_layer_single]; wait for the bed to heat up\nM109 S[nozzle_temperature_initial_layer]; wait for the extruder to heat up\nG92 E0; reset extruder\nG1 X20 Y5 Z0.3 F5000.0; move to start-line position\nG1 Z0.3 F1000; print height\nG1 X200 Y5 F1500.0 E15; draw 1st line\nG1 X200 Y5.3 Z0.3 F5000.0; move to side a little\nG1 X5.3 Y5.3 Z0.3 F1500.0 E30; draw 2nd line\nG1 Z3 F3000; move z up little to prevent scratching of surface",
"machine_end_gcode": "G91; Relative positionning\nG1 E-2 Z0.2 F2400; Retract and raise Z\nG1 X5 Y5 F3000; Wipe out\nG1 Z10; Raise Z more\nG90; Absolute positionning\nG1 X0 Y100; Present print\nM106 S0; Turn-off fan\nM104 S0; Turn-off hotend\nM140 S0; Turn-off bed\nM84 X Y E; Disable all steppers but Z",
"layer_change_gcode": "",
"scan_first_layer": "0"

2
resources/profiles/Creality/machine/Creality CR-10 V2 0.4 nozzle.json
View file

@ -103,7 +103,7 @@
"default_filament_profile": [
"Creality Generic PLA"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[hot_plate_temp_initial_layer] ; set bed temp\nM190 S[hot_plate_temp_initial_layer] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0",
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"scan_first_layer": "0"
}

2
resources/profiles/Elegoo/machine/Elegoo Neptune 2 0.4 nozzle.json
View file

@ -106,7 +106,7 @@
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[hot_plate_temp_initial_layer] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[hot_plate_temp_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

2
resources/profiles/Elegoo/machine/Elegoo Neptune 2S 0.4 nozzle.json
View file

@ -106,7 +106,7 @@
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[hot_plate_temp_initial_layer] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[hot_plate_temp_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

2
resources/profiles/Elegoo/machine/Elegoo Neptune 3 0.4 nozzle.json
View file

@ -103,7 +103,7 @@
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[hot_plate_temp_initial_layer] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[hot_plate_temp_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

2
resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max 0.4 nozzle.json
View file

@ -106,7 +106,7 @@
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[hot_plate_temp_initial_layer] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[hot_plate_temp_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

2
resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus 0.4 nozzle.json
View file

@ -106,7 +106,7 @@
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[hot_plate_temp_initial_layer] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[hot_plate_temp_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

2
resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro 0.4 nozzle.json
View file

@ -106,7 +106,7 @@
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[hot_plate_temp_initial_layer] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[hot_plate_temp_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

2
resources/profiles/Elegoo/machine/Elegoo Neptune X 0.4 nozzle.json
View file

@ -106,7 +106,7 @@
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[hot_plate_temp_initial_layer] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[hot_plate_temp_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

2
resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json
View file

@ -103,7 +103,7 @@
"default_filament_profile": [
"Qidi Generic PLA"
],
"machine_start_gcode": "G28\nM190 S[hot_plate_temp_initial_layer]\nG28 Z\n;G29\nG0 X4 Y5 Z50 F6000\nM109 S[nozzle_temperature_initial_layer]\nM82\nG0 Z0.3 F600\nG92 E-36.45\nG1 Y120 E-27.45 F3000\nG1 X6 E-27.30\nG1 Y5 E-18.30\nG1 X8 E-18.15\nG1 Y120 E-9.15\nG1 X10 E-9\nG1 Y5 E0",
"machine_start_gcode": "G28\nM190 S[bed_temperature_initial_layer_single]\nG28 Z\n;G29\nG0 X4 Y5 Z50 F6000\nM109 S[nozzle_temperature_initial_layer]\nM82\nG0 Z0.3 F600\nG92 E-36.45\nG1 Y120 E-27.45 F3000\nG1 X6 E-27.30\nG1 Y5 E-18.30\nG1 X8 E-18.15\nG1 Y120 E-9.15\nG1 X10 E-9\nG1 Y5 E0",
"machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG91\nG0 Z10 F600\nG90\nG0 X0 Y0 F12000\nG0 Z[printable_height] F600",
"scan_first_layer": "0"
}

2
resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json
View file

@ -103,7 +103,7 @@
"default_filament_profile": [
"Qidi Generic PLA"
],
"machine_start_gcode": "G28\nM190 S[hot_plate_temp_initial_layer]\nG28 Z\n;G29\nG0 X4 Y5 Z50 F6000\nM109 S[nozzle_temperature_initial_layer]\nM82\nG0 Z0.3 F600\nG92 E-36.45\nG1 Y120 E-27.45 F3000\nG1 X6 E-27.30\nG1 Y5 E-18.30\nG1 X8 E-18.15\nG1 Y120 E-9.15\nG1 X10 E-9\nG1 Y5 E0",
"machine_start_gcode": "G28\nM190 S[bed_temperature_initial_layer_single]\nG28 Z\n;G29\nG0 X4 Y5 Z50 F6000\nM109 S[nozzle_temperature_initial_layer]\nM82\nG0 Z0.3 F600\nG92 E-36.45\nG1 Y120 E-27.45 F3000\nG1 X6 E-27.30\nG1 Y5 E-18.30\nG1 X8 E-18.15\nG1 Y120 E-9.15\nG1 X10 E-9\nG1 Y5 E0",
"machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG91\nG0 Z10 F600\nG90\nG0 X0 Y0 F12000\nG0 Z[printable_height] F600",
"scan_first_layer": "0"
}

2
resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json
View file

@ -103,7 +103,7 @@
"default_filament_profile": [
"Qidi Generic PLA"
],
"machine_start_gcode": "G28\nM190 S[hot_plate_temp_initial_layer]\nG28 Z\n;G29\nG0 X4 Y5 Z50 F6000\nM109 S[nozzle_temperature_initial_layer]\nM82\nG0 Z0.3 F600\nG92 E-36.45\nG1 Y120 E-27.45 F3000\nG1 X6 E-27.30\nG1 Y5 E-18.30\nG1 X8 E-18.15\nG1 Y120 E-9.15\nG1 X10 E-9\nG1 Y5 E0",
"machine_start_gcode": "G28\nM190 S[bed_temperature_initial_layer_single]\nG28 Z\n;G29\nG0 X4 Y5 Z50 F6000\nM109 S[nozzle_temperature_initial_layer]\nM82\nG0 Z0.3 F600\nG92 E-36.45\nG1 Y120 E-27.45 F3000\nG1 X6 E-27.30\nG1 Y5 E-18.30\nG1 X8 E-18.15\nG1 Y120 E-9.15\nG1 X10 E-9\nG1 Y5 E0",
"machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG91\nG0 Z10 F600\nG90\nG0 X0 Y0 F12000\nG0 Z[printable_height] F600",
"scan_first_layer": "0"
}

2
resources/profiles/Sovol/machine/Sovol SV02 0.4 nozzle.json
View file

@ -135,7 +135,7 @@
"default_filament_profile": [
"Sovol Generic PLA"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[hot_plate_temp_initial_layer] ; set bed temp\nM190 S[hot_plate_temp_initial_layer] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0",
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"scan_first_layer": "0"
}

2
resources/profiles/UltiMaker/machine/UltiMaker 2 0.4 nozzle.json
View file

@ -109,7 +109,7 @@
"default_filament_profile": [
"UltiMaker Generic PLA"
],
"machine_start_gcode": "; # # # # # # START Header\nG21; metric values\nG90; absolute positioning\nM82 ; set extruder to absolute mode\nM107; start with the fan off\n\nM140 S[hot_plate_temp_initial_layer]; start bed heating\n\nG28 X0 Y0 Z0; move X/Y/Z to endstops\nG1 X1 Y6 F15000; move X/Y to start position\nG1 Z35 F9000; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{hot_plate_temp_initial_layer[0] - 5}; wait for bed temperature - 5\nM140 S[hot_plate_temp_initial_layer]; continue bed heating\nM109 S[nozzle_temperature_initial_layer]; wait for nozzle temperature\n\n; Purge and prime\nM83; set extruder to relative mode\nG92 E0; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000\nG0 F1200 Z{initial_layer_print_height/2}; Cut the connection to priming blob\nG0 X100 F10000; disconnect with the prime blob\nG0 X50; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600; drag filament to decompress bowden tube\nG1 X100 F3200; wipe backwards a bit\nG1 X150 F3200; back to where there is no plastic: avoid dragging\nG92 E0; reset extruder reference\nM82; set extruder to absolute mode\n\n; # # # # # # END Header",
"machine_start_gcode": "; # # # # # # START Header\nG21; metric values\nG90; absolute positioning\nM82 ; set extruder to absolute mode\nM107; start with the fan off\n\nM140 S[bed_temperature_initial_layer_single]; start bed heating\n\nG28 X0 Y0 Z0; move X/Y/Z to endstops\nG1 X1 Y6 F15000; move X/Y to start position\nG1 Z35 F9000; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{hot_plate_temp_initial_layer[0] - 5}; wait for bed temperature - 5\nM140 S[bed_temperature_initial_layer_single]; continue bed heating\nM109 S[nozzle_temperature_initial_layer]; wait for nozzle temperature\n\n; Purge and prime\nM83; set extruder to relative mode\nG92 E0; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000\nG0 F1200 Z{initial_layer_print_height/2}; Cut the connection to priming blob\nG0 X100 F10000; disconnect with the prime blob\nG0 X50; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600; drag filament to decompress bowden tube\nG1 X100 F3200; wipe backwards a bit\nG1 X150 F3200; back to where there is no plastic: avoid dragging\nG92 E0; reset extruder reference\nM82; set extruder to absolute mode\n\n; # # # # # # END Header",
"machine_end_gcode": "; # # # # # # START Footer\nG91; relative coordinates\n;G1 E-1 F1200; retract the filament\nG1 Z+15 X-10 Y-10 E-7 F6000; move Z a bit\n; G1 X-10 Y-10 F6000; move XY a bit\nG1 E-5.5 F300; retract the filament\nG28 X0 Y0; move X/Y to min endstops, so the head is out of the way\nM104 S0; extruder heater off\nM140 S0; heated bed heater off (if you have it)\nM84; disable motors\n; # # # # # # END Footer\n",
"scan_first_layer": "0"
}