diff --git a/resources/profiles/OpenEYE/machine/OpenEYE Peacock V2 0.4 nozzle.json b/resources/profiles/OpenEYE/machine/OpenEYE Peacock V2 0.4 nozzle.json
index 4528b72fe1..2912a51b45 100644
--- a/resources/profiles/OpenEYE/machine/OpenEYE Peacock V2 0.4 nozzle.json	
+++ b/resources/profiles/OpenEYE/machine/OpenEYE Peacock V2 0.4 nozzle.json	
@@ -4,6 +4,9 @@
 	"from": "system",
 	"inherits": "fdm_openeye_common",
 	"instantiation": "true",
+    "adaptive_bed_mesh_margin": "10",
+    "bed_mesh_max": "211,211",
+    "bed_mesh_min": "1.5,7",
     "layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}\n_MMU_UPDATE_HEIGHT",
     "machine_end_gcode": "MMU_END\nEND_PRINT",
 	"machine_load_filament_time": "30",
@@ -24,8 +27,8 @@
         "30"
     ],
 	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nMMU_START_SETUP INITIAL_TOOL={initial_tool} TOTAL_TOOLCHANGES=!total_toolchanges! REFERENCED_TOOLS=!referenced_tools! TOOL_COLORS=!colors! TOOL_TEMPS=!temperatures! TOOL_MATERIALS=!materials! FILAMENT_NAMES=!filament_names! PURGE_VOLUMES=!purge_volumes!\nMMU_START_CHECK\nSTART_PRINT BED_TEMP=[bed_temperature_initial_layer] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TYPE=\"{curr_bed_type}\"\n; Enter YOUR exist start_print macro call here (minus purging logic because tool may not be loaded yet)\nMMU_START_LOAD_INITIAL_TOOL\n; Optionally add YOUR additional start logic (like purging) here to run just prior to start\nSTART_PRINT_SECONDARY\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} ; For pause at layer functionality and better print stats",
-	"machine_unload_filament_time": "30",
+	"machine_start_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nMMU_START_SETUP INITIAL_TOOL={initial_tool} TOTAL_TOOLCHANGES=!total_toolchanges! REFERENCED_TOOLS=!referenced_tools! TOOL_COLORS=!colors! TOOL_TEMPS=!temperatures! TOOL_MATERIALS=!materials! FILAMENT_NAMES=!filament_names! PURGE_VOLUMES=!purge_volumes!\nMMU_START_CHECK\nSTART_PRINT BED_TEMP=[bed_temperature_initial_layer] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TYPE=\"{curr_bed_type}\" MESH_MIN={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} MESH_MAX={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE_MARGIN={adaptive_bed_mesh_margin}\n; Enter YOUR exist start_print macro call here (minus purging logic because tool may not be loaded yet)\nMMU_START_LOAD_INITIAL_TOOL\n; Optionally add YOUR additional start logic (like purging) here to run just prior to start\nSTART_PRINT_SECONDARY\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} ; For pause at layer functionality and better print stats",
+    "machine_unload_filament_time": "30",
 	"name": "OpenEYE Peacock V2 0.4 nozzle",
 	"nozzle_diameter": [
 		"0.4"
@@ -45,4 +48,4 @@
     ],
 	"setting_id": "GM001",
 	"type": "machine"
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/OpenEYE/machine/fdm_openeye_common.json b/resources/profiles/OpenEYE/machine/fdm_openeye_common.json
index 130e3b189f..a428532958 100644
--- a/resources/profiles/OpenEYE/machine/fdm_openeye_common.json
+++ b/resources/profiles/OpenEYE/machine/fdm_openeye_common.json
@@ -124,8 +124,8 @@
         "0"
     ],
 	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nMMU_START_SETUP INITIAL_TOOL={initial_tool} TOTAL_TOOLCHANGES=!total_toolchanges! REFERENCED_TOOLS=!referenced_tools! TOOL_COLORS=!colors! TOOL_TEMPS=!temperatures! TOOL_MATERIALS=!materials! FILAMENT_NAMES=!filament_names! PURGE_VOLUMES=!purge_volumes!\nMMU_START_CHECK\nSTART_PRINT BED_TEMP=[bed_temperature_initial_layer] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TYPE=\"{curr_bed_type}\"\n; Enter YOUR exist start_print macro call here (minus purging logic because tool may not be loaded yet)\nMMU_START_LOAD_INITIAL_TOOL\n; Optionally add YOUR additional start logic (like purging) here to run just prior to start\nSTART_PRINT_SECONDARY\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} ; For pause at layer functionality and better print stats",
-	"machine_tool_change_time": "0",
+	"machine_start_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nMMU_START_SETUP INITIAL_TOOL={initial_tool} TOTAL_TOOLCHANGES=!total_toolchanges! REFERENCED_TOOLS=!referenced_tools! TOOL_COLORS=!colors! TOOL_TEMPS=!temperatures! TOOL_MATERIALS=!materials! FILAMENT_NAMES=!filament_names! PURGE_VOLUMES=!purge_volumes!\nMMU_START_CHECK\nSTART_PRINT BED_TEMP=[bed_temperature_initial_layer] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TYPE=\"{curr_bed_type}\" MESH_MIN={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} MESH_MAX={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE_MARGIN={adaptive_bed_mesh_margin}\n; Enter YOUR exist start_print macro call here (minus purging logic because tool may not be loaded yet)\nMMU_START_LOAD_INITIAL_TOOL\n; Optionally add YOUR additional start logic (like purging) here to run just prior to start\nSTART_PRINT_SECONDARY\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} ; For pause at layer functionality and better print stats",
+    "machine_tool_change_time": "0",
     "machine_unload_filament_time": "0",
     "manual_filament_change": "0",
 	"max_layer_height": [