mirror of
https://github.com/SoftFever/OrcaSlicer.git
synced 2025-07-11 16:57:53 -06:00
Merge branch 'master' into lm_sla_supports_auto2
This commit is contained in:
Lukas Matena
commit
023b788777
44 changed files with 3347 additions and 2635 deletions
BIN
resources/icons/bed/mk2_4096_bottom.png
Normal file
BIN
resources/icons/bed/mk2_4096_bottom.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 144 KiB |
BIN
resources/icons/bed/mk2_4096_top.png
Normal file
BIN
resources/icons/bed/mk2_4096_top.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 364 KiB |
BIN
resources/icons/bed/mk2_8192_bottom.png
Normal file
BIN
resources/icons/bed/mk2_8192_bottom.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 398 KiB |
BIN
resources/icons/bed/mk2_8192_top.png
Normal file
BIN
resources/icons/bed/mk2_8192_top.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 794 KiB |
BIN
resources/icons/bed/mk3_4096_bottom.png
Normal file
BIN
resources/icons/bed/mk3_4096_bottom.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 143 KiB |
BIN
resources/icons/bed/mk3_4096_top.png
Normal file
BIN
resources/icons/bed/mk3_4096_top.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 361 KiB |
BIN
resources/icons/bed/mk3_8192_bottom.png
Normal file
BIN
resources/icons/bed/mk3_8192_bottom.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 396 KiB |
BIN
resources/icons/bed/mk3_8192_top.png
Normal file
BIN
resources/icons/bed/mk3_8192_top.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 790 KiB |
BIN
resources/icons/bed/sl1_4096_bottom.png
Normal file
BIN
resources/icons/bed/sl1_4096_bottom.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 105 KiB |
BIN
resources/icons/bed/sl1_4096_top.png
Normal file
BIN
resources/icons/bed/sl1_4096_top.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 277 KiB |
BIN
resources/icons/bed/sl1_8192_bottom.png
Normal file
BIN
resources/icons/bed/sl1_8192_bottom.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 324 KiB |
BIN
resources/icons/bed/sl1_8192_top.png
Normal file
BIN
resources/icons/bed/sl1_8192_top.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 674 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 58 KiB After Width: | Height: | Size: 70 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 70 KiB After Width: | Height: | Size: 58 KiB |
BIN
resources/icons/printers/PrusaResearch_MK2.5S.png
Normal file
BIN
resources/icons/printers/PrusaResearch_MK2.5S.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 70 KiB |
BIN
resources/icons/printers/PrusaResearch_MK2.5SMMU2S.png
Normal file
BIN
resources/icons/printers/PrusaResearch_MK2.5SMMU2S.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 58 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 63 KiB After Width: | Height: | Size: 65 KiB |
BIN
resources/icons/printers/PrusaResearch_MK3S.png
Normal file
BIN
resources/icons/printers/PrusaResearch_MK3S.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 65 KiB |
BIN
resources/icons/printers/PrusaResearch_MK3SMMU2S.png
Normal file
BIN
resources/icons/printers/PrusaResearch_MK3SMMU2S.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 70 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 41 KiB After Width: | Height: | Size: 55 KiB |
|
|
@ -1,8 +1,14 @@
|
|||
min_slic3r_version = 1.42.0-alpha6
|
||||
0.8.0-alpha6
|
||||
min_slic3r_version = 1.42.0-alpha
|
||||
0.8.0-alpha
|
||||
0.4.0-alpha4 Updated SLA profiles
|
||||
0.4.0-alpha3 Update of SLA profiles
|
||||
0.4.0-alpha2 First SLA profiles
|
||||
min_slic3r_version = 1.41.3-alpha
|
||||
0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
min_slic3r_version = 1.41.1
|
||||
0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.3.3 Prusament PETG released
|
||||
0.3.2 New MK2.5 and MK3 FW versions
|
||||
0.3.1 New MK2.5 and MK3 FW versions
|
||||
|
|
@ -34,6 +40,7 @@ min_slic3r_version = 1.41.0-alpha
|
|||
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
|
||||
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
|
||||
min_slic3r_version = 1.40.0
|
||||
0.1.12 New MK2.5 and MK3 FW versions
|
||||
0.1.11 fw version changed to 3.3.1
|
||||
0.1.10 MK3 jerk and acceleration update
|
||||
0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
name = Prusa Research
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the Slic3r configuration to be downgraded.
|
||||
config_version = 0.4.0-alpha4
|
||||
config_version = 0.8.0-alpha
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch/
|
||||
|
||||
|
|
@ -15,40 +15,71 @@ config_update_url = https://raw.githubusercontent.com/prusa3d/Slic3r-settings/ma
|
|||
#for example by the melt zone size, or whether the nozzle is hardened.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
[printer_model:MK3S]
|
||||
name = Original Prusa i3 MK3S
|
||||
variants = 0.4; 0.25; 0.6
|
||||
technology = FFF
|
||||
family = MK3
|
||||
|
||||
[printer_model:MK3]
|
||||
name = Original Prusa i3 MK3
|
||||
variants = 0.4; 0.25; 0.6
|
||||
technology = FFF
|
||||
family = MK3
|
||||
|
||||
[printer_model:MK3SMMU2S]
|
||||
name = Original Prusa i3 MK3S MMU2S
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = MK3
|
||||
|
||||
[printer_model:MK3MMU2]
|
||||
name = Original Prusa i3 MK3 MMU2
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = MK3
|
||||
|
||||
[printer_model:MK2.5S]
|
||||
name = Original Prusa i3 MK2.5S
|
||||
variants = 0.4; 0.25; 0.6
|
||||
technology = FFF
|
||||
family = MK2.5
|
||||
|
||||
[printer_model:MK2.5]
|
||||
name = Original Prusa i3 MK2.5
|
||||
variants = 0.4; 0.25; 0.6
|
||||
technology = FFF
|
||||
family = MK2.5
|
||||
|
||||
[printer_model:MK2S]
|
||||
name = Original Prusa i3 MK2/S
|
||||
variants = 0.4; 0.25; 0.6
|
||||
technology = FFF
|
||||
|
||||
[printer_model:MK3MMU2]
|
||||
name = Original Prusa i3 MK3 MMU 2.0
|
||||
[printer_model:MK2.5SMMU2S]
|
||||
name = Original Prusa i3 MK2.5S MMU2S
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
|
||||
[printer_model:MK2SMM]
|
||||
name = Original Prusa i3 MK2/S MMU 1.0
|
||||
variants = 0.4; 0.6
|
||||
technology = FFF
|
||||
family = MK2.5
|
||||
|
||||
[printer_model:MK2.5MMU2]
|
||||
name = Original Prusa i3 MK2.5 MMU 2.0
|
||||
name = Original Prusa i3 MK2.5 MMU2
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = MK2.5
|
||||
|
||||
[printer_model:MK2S]
|
||||
name = Original Prusa i3 MK2S
|
||||
variants = 0.4; 0.25; 0.6
|
||||
technology = FFF
|
||||
family = MK2
|
||||
|
||||
[printer_model:MK2SMM]
|
||||
name = Original Prusa i3 MK2S MMU1
|
||||
variants = 0.4; 0.6
|
||||
technology = FFF
|
||||
family = MK2
|
||||
|
||||
[printer_model:SL1]
|
||||
name = Original Prusa SL1
|
||||
variants = default
|
||||
technology = SLA
|
||||
family = SL1
|
||||
|
||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||
# not make it into the user interface.
|
||||
|
|
@ -197,6 +228,7 @@ support_material_interface_spacing = 0.1
|
|||
support_material_synchronize_layers = 1
|
||||
support_material_threshold = 80
|
||||
support_material_with_sheath = 1
|
||||
wipe_tower_bridging = 8
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.05mm ---XXX
|
||||
|
|
@ -232,11 +264,15 @@ inherits = *0.05mm*
|
|||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
|
||||
infill_extrusion_width = 0.5
|
||||
|
||||
# MK3 #
|
||||
[print:0.05mm ULTRADETAIL MK3]
|
||||
inherits = *0.05mm*; *MK3*
|
||||
fill_pattern = gyroid
|
||||
fill_density = 15%
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
|
||||
top_infill_extrusion_width = 0.4
|
||||
|
||||
# MK2 #
|
||||
[print:0.05mm ULTRADETAIL 0.25 nozzle]
|
||||
inherits = *0.05mm*; *0.25nozzle*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
|
||||
|
|
@ -248,14 +284,53 @@ small_perimeter_speed = 15
|
|||
solid_infill_speed = 20
|
||||
support_material_speed = 20
|
||||
|
||||
# MK3 #
|
||||
[print:0.05mm ULTRADETAIL 0.25 nozzle MK3]
|
||||
inherits = *0.05mm*; *0.25nozzle*; *MK3*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.07mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.07mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 8
|
||||
bridge_acceleration = 300
|
||||
bridge_flow_ratio = 0.7
|
||||
bridge_speed = 20
|
||||
default_acceleration = 500
|
||||
external_perimeter_speed = 20
|
||||
fill_density = 15%
|
||||
first_layer_acceleration = 500
|
||||
gap_fill_speed = 20
|
||||
infill_acceleration = 800
|
||||
infill_speed = 40
|
||||
max_print_speed = 80
|
||||
small_perimeter_speed = 20
|
||||
solid_infill_speed = 40
|
||||
support_material_extrusion_width = 0.3
|
||||
support_material_spacing = 1.5
|
||||
layer_height = 0.07
|
||||
perimeter_acceleration = 300
|
||||
perimeter_speed = 30
|
||||
perimeters = 3
|
||||
support_material_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
top_solid_layers = 11
|
||||
|
||||
# MK3 #
|
||||
[print:0.07mm ULTRADETAIL MK3]
|
||||
inherits = *0.07mm*; *MK3*
|
||||
fill_pattern = gyroid
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
|
||||
top_infill_extrusion_width = 0.4
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.10mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
# MK2 #
|
||||
[print:*0.10mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 7
|
||||
|
|
@ -265,6 +340,7 @@ layer_height = 0.1
|
|||
perimeter_acceleration = 800
|
||||
top_solid_layers = 9
|
||||
|
||||
# MK2 #
|
||||
[print:0.10mm DETAIL]
|
||||
inherits = *0.10mm*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
|
||||
|
|
@ -274,19 +350,23 @@ infill_speed = 60
|
|||
perimeter_speed = 50
|
||||
solid_infill_speed = 50
|
||||
|
||||
# MK3 #
|
||||
[print:0.10mm DETAIL MK3]
|
||||
inherits = *0.10mm*; *MK3*
|
||||
bridge_speed = 30
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
|
||||
external_perimeter_speed = 35
|
||||
external_perimeter_speed = 25
|
||||
infill_acceleration = 1250
|
||||
infill_speed = 200
|
||||
infill_speed = 80
|
||||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 200
|
||||
solid_infill_speed = 80
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 50
|
||||
top_solid_infill_speed = 40
|
||||
fill_pattern = gyroid
|
||||
fill_density = 15%
|
||||
|
||||
# MK2 #
|
||||
[print:0.10mm DETAIL 0.25 nozzle]
|
||||
inherits = *0.10mm*; *0.25nozzle*
|
||||
bridge_acceleration = 600
|
||||
|
|
@ -300,6 +380,7 @@ small_perimeter_speed = 15
|
|||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
# MK3 #
|
||||
[print:0.10mm DETAIL 0.25 nozzle MK3]
|
||||
inherits = *0.10mm*; *0.25nozzle*; *MK3*
|
||||
bridge_speed = 30
|
||||
|
|
@ -312,6 +393,7 @@ perimeter_speed = 45
|
|||
solid_infill_speed = 200
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
# MK3 #
|
||||
[print:0.10mm DETAIL 0.6 nozzle MK3]
|
||||
inherits = *0.10mm*; *0.6nozzle*; *MK3*
|
||||
bridge_speed = 30
|
||||
|
|
@ -341,6 +423,7 @@ solid_infill_speed = 50
|
|||
top_infill_extrusion_width = 0.4
|
||||
top_solid_layers = 7
|
||||
|
||||
# MK2 #
|
||||
[print:0.15mm 100mms Linear Advance]
|
||||
inherits = *0.15mm*
|
||||
bridge_flow_ratio = 0.95
|
||||
|
|
@ -354,11 +437,13 @@ solid_infill_speed = 100
|
|||
support_material_speed = 60
|
||||
top_solid_infill_speed = 70
|
||||
|
||||
# MK2 #
|
||||
[print:0.15mm OPTIMAL]
|
||||
inherits = *0.15mm*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
|
||||
top_infill_extrusion_width = 0.45
|
||||
|
||||
# MK2 #
|
||||
[print:0.15mm OPTIMAL 0.25 nozzle]
|
||||
inherits = *0.15mm*; *0.25nozzle*
|
||||
bridge_acceleration = 600
|
||||
|
|
@ -373,11 +458,27 @@ small_perimeter_speed = 15
|
|||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
# MK2 #
|
||||
[print:0.15mm OPTIMAL 0.6 nozzle]
|
||||
inherits = *0.15mm*; *0.6nozzle*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
|
||||
|
||||
[print:0.15mm OPTIMAL MK3]
|
||||
# MK3 #
|
||||
[print:0.15mm QUALITY MK3]
|
||||
inherits = *0.15mm*; *MK3*
|
||||
bridge_speed = 30
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 25
|
||||
infill_acceleration = 1250
|
||||
infill_speed = 80
|
||||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 80
|
||||
top_solid_infill_speed = 40
|
||||
fill_pattern = gyroid
|
||||
fill_density = 15%
|
||||
|
||||
[print:0.15mm SPEED MK3]
|
||||
inherits = *0.15mm*; *MK3*
|
||||
bridge_speed = 30
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
||||
|
|
@ -385,14 +486,15 @@ external_perimeter_speed = 35
|
|||
infill_acceleration = 1250
|
||||
infill_speed = 200
|
||||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
perimeter_speed = 60
|
||||
solid_infill_speed = 200
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
[print:0.15mm OPTIMAL MK3 SOLUBLE FULL]
|
||||
inherits = 0.15mm OPTIMAL MK3; *soluble_support*
|
||||
# MK3 MMU #
|
||||
[print:0.15mm SOLUBLE FULL MK3]
|
||||
inherits = 0.15mm SPEED MK3; *soluble_support*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
||||
notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
||||
support_material_extruder = 5
|
||||
support_material_interface_extruder = 5
|
||||
perimeter_speed = 40
|
||||
|
|
@ -400,31 +502,35 @@ solid_infill_speed = 40
|
|||
top_infill_extrusion_width = 0.45
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
[print:0.15mm OPTIMAL MK3 SOLUBLE INTERFACE]
|
||||
inherits = 0.15mm OPTIMAL MK3 SOLUBLE FULL
|
||||
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
# MK3 MMU #
|
||||
[print:0.15mm SOLUBLE INTERFACE MK3]
|
||||
inherits = 0.15mm SOLUBLE FULL MK3
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
support_material_extruder = 0
|
||||
support_material_interface_layers = 3
|
||||
support_material_with_sheath = 0
|
||||
|
||||
# MK2 MMU #
|
||||
[print:0.15mm OPTIMAL SOLUBLE FULL]
|
||||
inherits = *0.15mm*; *soluble_support*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
||||
external_perimeter_speed = 25
|
||||
notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_infill_extrusion_width = 0.45
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
# MK2 MMU #
|
||||
[print:0.15mm OPTIMAL SOLUBLE INTERFACE]
|
||||
inherits = 0.15mm OPTIMAL SOLUBLE FULL
|
||||
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
support_material_extruder = 0
|
||||
support_material_interface_layers = 3
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 80%
|
||||
|
||||
# MK3 #
|
||||
[print:0.15mm OPTIMAL 0.25 nozzle MK3]
|
||||
inherits = *0.15mm*; *0.25nozzle*; *MK3*
|
||||
bridge_speed = 30
|
||||
|
|
@ -451,6 +557,7 @@ solid_infill_speed = 50
|
|||
top_infill_extrusion_width = 0.4
|
||||
top_solid_layers = 5
|
||||
|
||||
# MK3 #
|
||||
[print:0.15mm OPTIMAL 0.6 nozzle MK3]
|
||||
inherits = *0.15mm*; *0.6nozzle*; *MK3*
|
||||
bridge_speed = 30
|
||||
|
|
@ -467,6 +574,7 @@ top_solid_infill_speed = 50
|
|||
# XXX--- 0.20mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
# MK2 #
|
||||
[print:0.20mm 100mms Linear Advance]
|
||||
inherits = *0.20mm*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
|
||||
|
|
@ -479,7 +587,22 @@ solid_infill_speed = 100
|
|||
support_material_speed = 60
|
||||
top_solid_infill_speed = 70
|
||||
|
||||
[print:0.20mm FAST MK3]
|
||||
# MK3 #
|
||||
[print:0.20mm QUALITY MK3]
|
||||
inherits = *0.20mm*; *MK3*
|
||||
bridge_speed = 30
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 25
|
||||
infill_acceleration = 1250
|
||||
infill_speed = 80
|
||||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 80
|
||||
top_solid_infill_speed = 40
|
||||
fill_pattern = gyroid
|
||||
fill_density = 15%
|
||||
|
||||
[print:0.20mm SPEED MK3]
|
||||
inherits = *0.20mm*; *MK3*
|
||||
bridge_speed = 30
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
||||
|
|
@ -487,14 +610,15 @@ external_perimeter_speed = 35
|
|||
infill_acceleration = 1250
|
||||
infill_speed = 200
|
||||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
perimeter_speed = 60
|
||||
solid_infill_speed = 200
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
[print:0.20mm FAST MK3 SOLUBLE FULL]
|
||||
inherits = 0.20mm FAST MK3; *soluble_support*
|
||||
# MK3 MMU #
|
||||
[print:0.20mm SOLUBLE FULL MK3]
|
||||
inherits = 0.20mm SPEED MK3; *soluble_support*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
||||
notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
||||
support_material_extruder = 5
|
||||
support_material_interface_extruder = 5
|
||||
perimeter_speed = 40
|
||||
|
|
@ -502,38 +626,44 @@ solid_infill_speed = 40
|
|||
top_infill_extrusion_width = 0.45
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
[print:0.20mm FAST MK3 SOLUBLE INTERFACE]
|
||||
inherits = 0.20mm FAST MK3 SOLUBLE FULL
|
||||
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
# MK3 MMU #
|
||||
[print:0.20mm SOLUBLE INTERFACE MK3]
|
||||
inherits = 0.20mm SOLUBLE FULL MK3
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
support_material_extruder = 0
|
||||
support_material_interface_layers = 3
|
||||
support_material_with_sheath = 0
|
||||
|
||||
# MK2 #
|
||||
[print:0.20mm NORMAL]
|
||||
inherits = *0.20mm*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
|
||||
|
||||
# MK2 #
|
||||
[print:0.20mm NORMAL 0.6 nozzle]
|
||||
inherits = *0.20mm*; *0.6nozzle*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
|
||||
|
||||
# MK2 MMU #
|
||||
[print:0.20mm NORMAL SOLUBLE FULL]
|
||||
inherits = *0.20mm*; *soluble_support*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
||||
external_perimeter_speed = 30
|
||||
notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
# MK2 MMU #
|
||||
[print:0.20mm NORMAL SOLUBLE INTERFACE]
|
||||
inherits = 0.20mm NORMAL SOLUBLE FULL
|
||||
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
support_material_extruder = 0
|
||||
support_material_interface_layers = 3
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 80%
|
||||
|
||||
# MK3 #
|
||||
[print:0.20mm FAST 0.6 nozzle MK3]
|
||||
inherits = *0.20mm*; *0.6nozzle*; *MK3*
|
||||
bridge_speed = 30
|
||||
|
|
@ -567,6 +697,7 @@ solid_infill_speed = 60
|
|||
top_solid_infill_speed = 50
|
||||
top_solid_layers = 4
|
||||
|
||||
# MK2 #
|
||||
[print:0.35mm FAST]
|
||||
inherits = *0.35mm*
|
||||
bridge_flow_ratio = 0.95
|
||||
|
|
@ -576,10 +707,12 @@ perimeter_extrusion_width = 0.43
|
|||
solid_infill_extrusion_width = 0.7
|
||||
top_infill_extrusion_width = 0.43
|
||||
|
||||
# MK2 #
|
||||
[print:0.35mm FAST 0.6 nozzle]
|
||||
inherits = *0.35mm*; *0.6nozzle*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
|
||||
|
||||
# MK2 MMU #
|
||||
[print:0.35mm FAST sol full 0.6 nozzle]
|
||||
inherits = *0.35mm*; *0.6nozzle*; *soluble_support*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
|
||||
|
|
@ -591,6 +724,7 @@ support_material_interface_layers = 3
|
|||
support_material_xy_spacing = 120%
|
||||
top_infill_extrusion_width = 0.57
|
||||
|
||||
# MK2 MMU #
|
||||
[print:0.35mm FAST sol int 0.6 nozzle]
|
||||
inherits = 0.35mm FAST sol full 0.6 nozzle
|
||||
support_material_extruder = 0
|
||||
|
|
@ -602,38 +736,45 @@ support_material_xy_spacing = 150%
|
|||
# XXX----- MK2.5 ----XXX
|
||||
# XXXXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
# MK2.5 #
|
||||
[print:0.15mm 100mms Linear Advance MK2.5]
|
||||
inherits = 0.15mm 100mms Linear Advance
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
||||
single_extruder_multi_material_priming = 0
|
||||
|
||||
# MK2.5 #
|
||||
[print:0.15mm OPTIMAL MK2.5]
|
||||
inherits = 0.15mm OPTIMAL
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
||||
single_extruder_multi_material_priming = 0
|
||||
|
||||
# MK2.5 MMU2 #
|
||||
[print:0.15mm OPTIMAL SOLUBLE FULL MK2.5]
|
||||
inherits = 0.15mm OPTIMAL SOLUBLE FULL
|
||||
support_material_extruder = 5
|
||||
support_material_interface_extruder = 5
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
||||
|
||||
# MK2.5 MMU2 #
|
||||
[print:0.15mm OPTIMAL SOLUBLE INTERFACE MK2.5]
|
||||
inherits = 0.15mm OPTIMAL SOLUBLE INTERFACE
|
||||
support_material_extruder = 0
|
||||
support_material_interface_extruder = 5
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
||||
|
||||
# MK2.5 #
|
||||
[print:0.20mm 100mms Linear Advance MK2.5]
|
||||
inherits = 0.20mm 100mms Linear Advance
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
||||
single_extruder_multi_material_priming = 0
|
||||
|
||||
# MK2.5 #
|
||||
[print:0.20mm NORMAL MK2.5]
|
||||
inherits = 0.20mm NORMAL
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
||||
single_extruder_multi_material_priming = 0
|
||||
|
||||
# MK2.5 MMU2 #
|
||||
[print:0.20mm NORMAL SOLUBLE FULL MK2.5]
|
||||
inherits = 0.20mm NORMAL SOLUBLE FULL
|
||||
support_material_extruder = 5
|
||||
|
|
@ -641,6 +782,7 @@ support_material_interface_extruder = 5
|
|||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
||||
single_extruder_multi_material_priming = 0
|
||||
|
||||
# MK2.5 MMU2 #
|
||||
[print:0.20mm NORMAL SOLUBLE INTERFACE MK2.5]
|
||||
inherits = 0.20mm NORMAL SOLUBLE INTERFACE
|
||||
support_material_extruder = 0
|
||||
|
|
@ -648,6 +790,7 @@ support_material_interface_extruder = 5
|
|||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
||||
single_extruder_multi_material_priming = 0
|
||||
|
||||
# MK2.5 #
|
||||
[print:0.35mm FAST MK2.5]
|
||||
inherits = 0.35mm FAST
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
||||
|
|
@ -934,7 +1077,7 @@ first_layer_bed_temperature = 100
|
|||
first_layer_temperature = 270
|
||||
temperature = 270
|
||||
|
||||
[filament:Primavalue PVA]
|
||||
[filament:PrimaSelect PVA+]
|
||||
inherits = *PLA*
|
||||
filament_cost = 108
|
||||
filament_density = 1.23
|
||||
|
|
@ -963,6 +1106,11 @@ filament_cooling_final_speed = 50
|
|||
filament_cooling_initial_speed = 10
|
||||
filament_cooling_moves = 5
|
||||
filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6";
|
||||
filament_loading_speed_start = 19
|
||||
filament_load_time = 15
|
||||
filament_unload_time = 12
|
||||
filament_loading_speed = 14
|
||||
filament_unloading_speed = 20
|
||||
|
||||
[filament:Generic ABS MMU2]
|
||||
inherits = *ABS MMU2*
|
||||
|
|
@ -1009,13 +1157,14 @@ first_layer_temperature = 230
|
|||
filament_cooling_final_speed = 1
|
||||
filament_cooling_initial_speed = 2
|
||||
filament_cooling_moves = 1
|
||||
filament_load_time = 12
|
||||
filament_load_time = 15
|
||||
filament_loading_speed = 14
|
||||
filament_notes = PET
|
||||
filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_unload_time = 11
|
||||
filament_unload_time = 12
|
||||
filament_unloading_speed = 20
|
||||
filament_unloading_speed_start = 120
|
||||
filament_loading_speed_start = 19
|
||||
|
||||
[filament:Generic PET MMU2]
|
||||
inherits = *PET MMU2*
|
||||
|
|
@ -1023,7 +1172,7 @@ inherits = *PET MMU2*
|
|||
[filament:Prusa PET MMU2]
|
||||
inherits = *PET MMU2*
|
||||
|
||||
[filament:Prusament PET MMU2]
|
||||
[filament:Prusament PETG MMU2]
|
||||
inherits = *PET MMU2*
|
||||
|
||||
[filament:Prusa PLA]
|
||||
|
|
@ -1043,14 +1192,17 @@ filament_notes = "Affordable filament for everyday printing in premium quality m
|
|||
inherits = Prusa PLA
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
||||
temperature = 205
|
||||
filament_cooling_final_speed = 1
|
||||
filament_cooling_initial_speed = 2
|
||||
filament_cooling_final_speed = 2
|
||||
filament_cooling_initial_speed = 3
|
||||
filament_cooling_moves = 1
|
||||
filament_load_time = 12
|
||||
filament_load_time = 15
|
||||
filament_loading_speed = 14
|
||||
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_unload_time = 11
|
||||
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_unload_time = 12
|
||||
filament_unloading_speed = 20
|
||||
filament_loading_speed_start = 19
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_unloading_speed_start = 100
|
||||
|
||||
[filament:Generic PLA MMU2]
|
||||
inherits = *PLA MMU2*
|
||||
|
|
@ -1133,14 +1285,53 @@ first_layer_temperature = 200
|
|||
filament_cooling_final_speed = 1
|
||||
filament_cooling_initial_speed = 2
|
||||
filament_max_volumetric_speed = 4
|
||||
filament_type = PVA
|
||||
filament_type = PLA
|
||||
filament_cooling_moves = 1
|
||||
filament_load_time = 12
|
||||
filament_load_time = 15
|
||||
filament_loading_speed = 14
|
||||
filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_unload_time = 11
|
||||
filament_unload_time = 12
|
||||
filament_unloading_speed = 20
|
||||
filament_unloading_speed_start = 100
|
||||
filament_loading_speed_start = 19
|
||||
|
||||
[filament:PrimaSelect PVA+ MMU2]
|
||||
inherits = *common*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
||||
bed_temperature = 60
|
||||
bridge_fan_speed = 100
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 1
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #FFFFD7
|
||||
filament_cooling_final_speed = 2
|
||||
filament_cooling_initial_speed = 4
|
||||
filament_cooling_moves = 2
|
||||
filament_cost = 25.4
|
||||
filament_density = 1.24
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 15
|
||||
filament_loading_speed = 14
|
||||
filament_loading_speed_start = 19
|
||||
filament_max_volumetric_speed = 4
|
||||
filament_minimal_purge_on_wipe_tower = 5
|
||||
filament_notes = PVA
|
||||
filament_ramming_parameters = "120 110 3.83871 3.90323 3.96774 4.03226 4.09677 4.19355 4.3871 4.83871 5.67742 6.93548 8.54839 10.3226 11.9677 13.2581 14.129 14.5806| 0.05 3.8258 0.45 3.89676 0.95 4.05807 1.45 4.23548 1.95 5.18386 2.45 7.80651 2.95 11.5356 3.45 13.9872 3.95 14.7613 4.45 7.6 4.95 7.6"
|
||||
filament_soluble = 1
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 12
|
||||
filament_unloading_speed = 20
|
||||
filament_unloading_speed_start = 100
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 200
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
|
||||
temperature = 195
|
||||
|
||||
[filament:Verbatim PP]
|
||||
inherits = *common*
|
||||
|
|
@ -1322,19 +1513,60 @@ inherits = *common 0.05*
|
|||
exposure_time = 7
|
||||
initial_exposure_time = 40
|
||||
|
||||
# v2
|
||||
|
||||
[sla_material:3DM-ABS 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 9
|
||||
initial_exposure_time = 35
|
||||
|
||||
[sla_material:3DM-DENT 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 7
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:3DM-HR Green 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 15
|
||||
initial_exposure_time = 40
|
||||
|
||||
[sla_material:3DM-HR Red Wine 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 9
|
||||
initial_exposure_time = 35
|
||||
|
||||
[sla_material:3DM-XPRO White 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 9
|
||||
initial_exposure_time = 35
|
||||
|
||||
[sla_material:FTD Ash Grey 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 9
|
||||
initial_exposure_time = 40
|
||||
|
||||
[sla_material:Jamg He LOC-19 Super Low Odor Skin 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 7.5
|
||||
initial_exposure_time = 40
|
||||
|
||||
[sla_material:Jamg He LOC-20 Super Low Odor White 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 6.5
|
||||
initial_exposure_time = 40
|
||||
|
||||
[sla_material:Jamg He LOC-60 Super Low Odor Grey 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 6.5
|
||||
initial_exposure_time = 40
|
||||
|
||||
|
||||
########### Materials 0.035
|
||||
|
||||
## [sla_material:Jamg He Transparent Clear 0.035]
|
||||
## inherits = *common 0.035*
|
||||
|
||||
## [sla_material:Jamg He Transparent Green 0.035]
|
||||
## inherits = *common 0.035*
|
||||
|
||||
## [sla_material:Jamg He Transparent Orange 0.035]
|
||||
## inherits = *common 0.035*
|
||||
|
||||
## [sla_material:Jamg He Transparent Red 0.035]
|
||||
## inherits = *common 0.035*
|
||||
[sla_material:Jamg He Orange 0.035]
|
||||
inherits = *common 0.035*
|
||||
exposure_time = 9
|
||||
initial_exposure_time = 35
|
||||
|
||||
########### Materials 0.1
|
||||
|
||||
|
|
@ -1455,10 +1687,10 @@ default_print_profile = 0.15mm OPTIMAL
|
|||
# XXX--- MK2 ---XXX
|
||||
# XXXXXXXXXXXXXXXXX
|
||||
|
||||
[printer:Original Prusa i3 MK2]
|
||||
[printer:Original Prusa i3 MK2S]
|
||||
inherits = *common*
|
||||
|
||||
[printer:Original Prusa i3 MK2 0.25 nozzle]
|
||||
[printer:Original Prusa i3 MK2S 0.25 nozzle]
|
||||
inherits = *common*
|
||||
max_layer_height = 0.15
|
||||
min_layer_height = 0.05
|
||||
|
|
@ -1469,7 +1701,7 @@ variable_layer_height = 1
|
|||
printer_variant = 0.25
|
||||
default_print_profile = 0.10mm DETAIL 0.25 nozzle
|
||||
|
||||
[printer:Original Prusa i3 MK2 0.6 nozzle]
|
||||
[printer:Original Prusa i3 MK2S 0.6 nozzle]
|
||||
inherits = *common*
|
||||
max_layer_height = 0.35
|
||||
min_layer_height = 0.1
|
||||
|
|
@ -1481,12 +1713,12 @@ default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
|||
# XXX--- MK2MM ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[printer:Original Prusa i3 MK2 MMU1 Single]
|
||||
[printer:Original Prusa i3 MK2S MMU1 Single]
|
||||
inherits = *mm-single*
|
||||
max_layer_height = 0.25
|
||||
min_layer_height = 0.07
|
||||
|
||||
[printer:Original Prusa i3 MK2 MMU1 Single 0.6 nozzle]
|
||||
[printer:Original Prusa i3 MK2S MMU1 Single 0.6 nozzle]
|
||||
inherits = *mm-single*
|
||||
nozzle_diameter = 0.6
|
||||
printer_variant = 0.6
|
||||
|
|
@ -1494,13 +1726,13 @@ default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
|||
max_layer_height = 0.35
|
||||
min_layer_height = 0.1
|
||||
|
||||
[printer:Original Prusa i3 MK2 MMU1]
|
||||
[printer:Original Prusa i3 MK2S MMU1]
|
||||
inherits = *mm-multi*
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4
|
||||
max_layer_height = 0.25
|
||||
min_layer_height = 0.07
|
||||
|
||||
[printer:Original Prusa i3 MK2 MMU1 0.6 nozzle]
|
||||
[printer:Original Prusa i3 MK2S MMU1 0.6 nozzle]
|
||||
inherits = *mm-multi*
|
||||
nozzle_diameter = 0.6,0.6,0.6,0.6
|
||||
printer_variant = 0.6
|
||||
|
|
@ -1513,7 +1745,19 @@ min_layer_height = 0.1
|
|||
# XXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[printer:Original Prusa i3 MK2.5]
|
||||
inherits = Original Prusa i3 MK2
|
||||
inherits = Original Prusa i3 MK2S
|
||||
printer_model = MK2.5
|
||||
remaining_times = 1
|
||||
start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 0.25 nozzle]
|
||||
inherits = Original Prusa i3 MK2S 0.25 nozzle
|
||||
printer_model = MK2.5
|
||||
remaining_times = 1
|
||||
start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 0.6 nozzle]
|
||||
inherits = Original Prusa i3 MK2S 0.6 nozzle
|
||||
printer_model = MK2.5
|
||||
remaining_times = 1
|
||||
start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
|
@ -1545,7 +1789,7 @@ machine_min_travel_rate = 0
|
|||
default_print_profile = 0.15mm OPTIMAL MK2.5
|
||||
default_filament_profile = Prusament PLA
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
||||
start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
||||
start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
||||
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 MMU2]
|
||||
|
|
@ -1579,20 +1823,85 @@ single_extruder_multi_material = 1
|
|||
# to be defined explicitely.
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
||||
start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
||||
start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
||||
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors\n
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 0.25 nozzle]
|
||||
inherits = Original Prusa i3 MK2 0.25 nozzle
|
||||
printer_model = MK2.5
|
||||
remaining_times = 1
|
||||
start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
[printer:Original Prusa i3 MK2.5S]
|
||||
inherits = Original Prusa i3 MK2.5
|
||||
printer_model = MK2.5S
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 0.6 nozzle]
|
||||
inherits = Original Prusa i3 MK2 0.6 nozzle
|
||||
printer_model = MK2.5
|
||||
[printer:Original Prusa i3 MK2.5S 0.25 nozzle]
|
||||
inherits = Original Prusa i3 MK2.5 0.25 nozzle
|
||||
printer_model = MK2.5S
|
||||
|
||||
[printer:Original Prusa i3 MK2.5S 0.6 nozzle]
|
||||
inherits = Original Prusa i3 MK2.5 0.6 nozzle
|
||||
printer_model = MK2.5S
|
||||
|
||||
[printer:Original Prusa i3 MK2.5S MMU2S Single]
|
||||
inherits = Original Prusa i3 MK2.5; *mm2s*
|
||||
printer_model = MK2.5SMMU2S
|
||||
single_extruder_multi_material = 0
|
||||
max_print_height = 200
|
||||
remaining_times = 1
|
||||
start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
silent_mode = 0
|
||||
retract_lift_below = 199
|
||||
machine_max_acceleration_e = 10000
|
||||
machine_max_acceleration_extruding = 2000
|
||||
machine_max_acceleration_retracting = 1500
|
||||
machine_max_acceleration_x = 9000
|
||||
machine_max_acceleration_y = 9000
|
||||
machine_max_acceleration_z = 500
|
||||
machine_max_feedrate_e = 120
|
||||
machine_max_feedrate_x = 500
|
||||
machine_max_feedrate_y = 500
|
||||
machine_max_feedrate_z = 12
|
||||
machine_max_jerk_e = 2.5
|
||||
machine_max_jerk_x = 10
|
||||
machine_max_jerk_y = 10
|
||||
machine_max_jerk_z = 0.2
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
default_print_profile = 0.15mm OPTIMAL MK2.5
|
||||
default_filament_profile = Prusament PLA
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
||||
start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
||||
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
|
||||
[printer:Original Prusa i3 MK2.5S MMU2S]
|
||||
inherits = Original Prusa i3 MK2.5; *mm2s*
|
||||
printer_model = MK2.5SMMU2S
|
||||
max_print_height = 200
|
||||
remaining_times = 1
|
||||
silent_mode = 0
|
||||
retract_lift_below = 199
|
||||
machine_max_acceleration_e = 10000
|
||||
machine_max_acceleration_extruding = 2000
|
||||
machine_max_acceleration_retracting = 1500
|
||||
machine_max_acceleration_x = 9000
|
||||
machine_max_acceleration_y = 9000
|
||||
machine_max_acceleration_z = 500
|
||||
machine_max_feedrate_e = 120
|
||||
machine_max_feedrate_x = 500
|
||||
machine_max_feedrate_y = 500
|
||||
machine_max_feedrate_z = 12
|
||||
machine_max_jerk_e = 2.5
|
||||
machine_max_jerk_x = 10
|
||||
machine_max_jerk_y = 10
|
||||
machine_max_jerk_z = 0.2
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
default_print_profile = 0.15mm OPTIMAL MK2.5
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
||||
single_extruder_multi_material = 1
|
||||
# The 5x nozzle diameter defines the number of extruders. Other extruder parameters
|
||||
# (for example the retract values) are duplicaed from the first value, so they do not need
|
||||
# to be defined explicitely.
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
||||
start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
||||
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors\n
|
||||
|
||||
|
||||
# XXXXXXXXXXXXXXXXX
|
||||
# XXX--- MK3 ---XXX
|
||||
|
|
@ -1622,9 +1931,9 @@ remaining_times = 1
|
|||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
||||
retract_lift_below = 209
|
||||
max_print_height = 210
|
||||
start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||
start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||
printer_model = MK3
|
||||
default_print_profile = 0.15mm OPTIMAL MK3
|
||||
default_print_profile = 0.15mm QUALITY MK3
|
||||
|
||||
[printer:Original Prusa i3 MK3 0.25 nozzle]
|
||||
inherits = Original Prusa i3 MK3
|
||||
|
|
@ -1642,6 +1951,18 @@ min_layer_height = 0.1
|
|||
printer_variant = 0.6
|
||||
default_print_profile = 0.15mm OPTIMAL 0.6 nozzle MK3
|
||||
|
||||
[printer:Original Prusa i3 MK3S]
|
||||
inherits = Original Prusa i3 MK3
|
||||
printer_model = MK3S
|
||||
|
||||
[printer:Original Prusa i3 MK3S 0.25 nozzle]
|
||||
inherits = Original Prusa i3 MK3 0.25 nozzle
|
||||
printer_model = MK3S
|
||||
|
||||
[printer:Original Prusa i3 MK3S 0.6 nozzle]
|
||||
inherits = Original Prusa i3 MK3 0.6 nozzle
|
||||
printer_model = MK3S
|
||||
|
||||
[printer:*mm2*]
|
||||
inherits = Original Prusa i3 MK3
|
||||
single_extruder_multi_material = 1
|
||||
|
|
@ -1651,7 +1972,19 @@ parking_pos_retraction = 85
|
|||
retract_length_toolchange = 3
|
||||
extra_loading_move = -13
|
||||
printer_model = MK3MMU2
|
||||
default_print_profile = 0.15mm OPTIMAL MK3
|
||||
default_print_profile = 0.15mm QUALITY MK3
|
||||
default_filament_profile = Prusament PLA MMU2
|
||||
|
||||
[printer:*mm2s*]
|
||||
inherits = Original Prusa i3 MK3
|
||||
single_extruder_multi_material = 1
|
||||
cooling_tube_length = 20
|
||||
cooling_tube_retraction = 40
|
||||
parking_pos_retraction = 85
|
||||
retract_length_toolchange = 3
|
||||
extra_loading_move = -25
|
||||
printer_model = MK3SMMU2S
|
||||
default_print_profile = 0.15mm QUALITY MK3
|
||||
default_filament_profile = Prusament PLA MMU2
|
||||
|
||||
[printer:Original Prusa i3 MK3 MMU2 Single]
|
||||
|
|
@ -1672,6 +2005,21 @@ extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
|||
start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
||||
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors\n
|
||||
|
||||
[printer:Original Prusa i3 MK3S MMU2S Single]
|
||||
inherits = *mm2s*
|
||||
single_extruder_multi_material = 0
|
||||
default_filament_profile = Prusament PLA
|
||||
start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
||||
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
|
||||
[printer:Original Prusa i3 MK3S MMU2S]
|
||||
inherits = *mm2s*
|
||||
machine_max_acceleration_e = 8000,8000
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
||||
start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
||||
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors\n
|
||||
|
||||
[printer:Original Prusa SL1]
|
||||
printer_technology = SLA
|
||||
printer_model = SL1
|
||||
|
|
|
|||
|
|
@ -1333,6 +1333,8 @@ void Transformation::set_rotation(const Vec3d& rotation)
|
|||
void Transformation::set_rotation(Axis axis, double rotation)
|
||||
{
|
||||
rotation = angle_to_0_2PI(rotation);
|
||||
if (is_approx(std::abs(rotation), 2.0 * (double)PI))
|
||||
rotation = 0.0;
|
||||
|
||||
if (m_rotation(axis) != rotation)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -1445,7 +1445,7 @@ int ModelVolume::extruder_id() const
|
|||
int extruder_id = -1;
|
||||
if (this->is_model_part()) {
|
||||
const ConfigOption *opt = this->config.option("extruder");
|
||||
if (opt == nullptr)
|
||||
if ((opt == nullptr) || (opt->getInt() == 0))
|
||||
opt = this->object->config.option("extruder");
|
||||
extruder_id = (opt == nullptr) ? 0 : opt->getInt();
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1137,6 +1137,9 @@ std::string Print::validate() const
|
|||
// Apply the same transformations we apply to the actual meshes when slicing them.
|
||||
object->model_object()->instances.front()->transform_polygon(&convex_hull);
|
||||
// Grow convex hull with the clearance margin.
|
||||
// FIXME: Arrangement has different parameters for offsetting (jtMiter, limit 2)
|
||||
// which causes that the warning will be showed after arrangement with the
|
||||
// appropriate object distance. Even if I set this to jtMiter the warning still shows up.
|
||||
convex_hull = offset(convex_hull, scale_(m_config.extruder_clearance_radius.value)/2, jtRound, scale_(0.1)).front();
|
||||
// Now we check that no instance of convex_hull intersects any of the previously checked object instances.
|
||||
for (const Point © : object->m_copies) {
|
||||
|
|
|
|||
|
|
@ -42,22 +42,27 @@ namespace Slic3r {
|
|||
|
||||
static boost::log::trivial::severity_level logSeverity = boost::log::trivial::error;
|
||||
|
||||
void set_logging_level(unsigned int level)
|
||||
static boost::log::trivial::severity_level level_to_boost(unsigned level)
|
||||
{
|
||||
switch (level) {
|
||||
// Report fatal errors only.
|
||||
case 0: logSeverity = boost::log::trivial::fatal; break;
|
||||
case 0: return boost::log::trivial::fatal;
|
||||
// Report fatal errors and errors.
|
||||
case 1: logSeverity = boost::log::trivial::error; break;
|
||||
case 1: return boost::log::trivial::error;
|
||||
// Report fatal errors, errors and warnings.
|
||||
case 2: logSeverity = boost::log::trivial::warning; break;
|
||||
case 2: return boost::log::trivial::warning;
|
||||
// Report all errors, warnings and infos.
|
||||
case 3: logSeverity = boost::log::trivial::info; break;
|
||||
case 3: return boost::log::trivial::info;
|
||||
// Report all errors, warnings, infos and debugging.
|
||||
case 4: logSeverity = boost::log::trivial::debug; break;
|
||||
case 4: return boost::log::trivial::debug;
|
||||
// Report everyting including fine level tracing information.
|
||||
default: logSeverity = boost::log::trivial::trace; break;
|
||||
default: return boost::log::trivial::trace;
|
||||
}
|
||||
}
|
||||
|
||||
void set_logging_level(unsigned int level)
|
||||
{
|
||||
logSeverity = level_to_boost(level);
|
||||
|
||||
boost::log::core::get()->set_filter
|
||||
(
|
||||
|
|
@ -73,6 +78,7 @@ unsigned get_logging_level()
|
|||
case boost::log::trivial::warning : return 2;
|
||||
case boost::log::trivial::info : return 3;
|
||||
case boost::log::trivial::debug : return 4;
|
||||
case boost::log::trivial::trace : return 5;
|
||||
default: return 1;
|
||||
}
|
||||
}
|
||||
|
|
@ -88,21 +94,7 @@ static struct RunOnInit {
|
|||
|
||||
void trace(unsigned int level, const char *message)
|
||||
{
|
||||
boost::log::trivial::severity_level severity = boost::log::trivial::trace;
|
||||
switch (level) {
|
||||
// Report fatal errors only.
|
||||
case 0: severity = boost::log::trivial::fatal; break;
|
||||
// Report fatal errors and errors.
|
||||
case 1: severity = boost::log::trivial::error; break;
|
||||
// Report fatal errors, errors and warnings.
|
||||
case 2: severity = boost::log::trivial::warning; break;
|
||||
// Report all errors, warnings and infos.
|
||||
case 3: severity = boost::log::trivial::info; break;
|
||||
// Report all errors, warnings, infos and debugging.
|
||||
case 4: severity = boost::log::trivial::debug; break;
|
||||
// Report everyting including fine level tracing information.
|
||||
default: severity = boost::log::trivial::trace; break;
|
||||
}
|
||||
boost::log::trivial::severity_level severity = level_to_boost(level);
|
||||
|
||||
BOOST_LOG_STREAM_WITH_PARAMS(::boost::log::trivial::logger::get(),\
|
||||
(::boost::log::keywords::severity = severity)) << message;
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load diff
|
|
@ -6,6 +6,7 @@
|
|||
#include <vector>
|
||||
#include <set>
|
||||
#include <unordered_map>
|
||||
#include <functional>
|
||||
#include <boost/filesystem.hpp>
|
||||
|
||||
#include <wx/sizer.h>
|
||||
|
|
@ -13,6 +14,7 @@
|
|||
#include <wx/button.h>
|
||||
#include <wx/choice.h>
|
||||
#include <wx/spinctrl.h>
|
||||
#include <wx/textctrl.h>
|
||||
|
||||
#include "libslic3r/PrintConfig.hpp"
|
||||
#include "slic3r/Utils/PresetUpdater.hpp"
|
||||
|
|
@ -34,8 +36,13 @@ enum {
|
|||
BTN_SPACING = 10,
|
||||
INDENT_SPACING = 30,
|
||||
VERTICAL_SPACING = 10,
|
||||
|
||||
MAX_COLS = 4,
|
||||
ROW_SPACING = 75,
|
||||
};
|
||||
|
||||
typedef std::function<bool(const VendorProfile::PrinterModel&)> ModelFilter;
|
||||
|
||||
struct PrinterPicker: wxPanel
|
||||
{
|
||||
struct Checkbox : wxCheckBox
|
||||
|
|
@ -52,13 +59,18 @@ struct PrinterPicker: wxPanel
|
|||
|
||||
const std::string vendor_id;
|
||||
std::vector<Checkbox*> cboxes;
|
||||
unsigned variants_checked;
|
||||
std::vector<Checkbox*> cboxes_alt;
|
||||
|
||||
PrinterPicker(wxWindow *parent, const VendorProfile &vendor, const AppConfig &appconfig_vendors);
|
||||
PrinterPicker(wxWindow *parent, const VendorProfile &vendor, wxString title, size_t max_cols, const AppConfig &appconfig_vendors, const ModelFilter &filter);
|
||||
PrinterPicker(wxWindow *parent, const VendorProfile &vendor, wxString title, size_t max_cols, const AppConfig &appconfig_vendors);
|
||||
|
||||
void select_all(bool select);
|
||||
void select_all(bool select, bool alternates = false);
|
||||
void select_one(size_t i, bool select);
|
||||
void on_checkbox(const Checkbox *cbox, bool checked);
|
||||
|
||||
int get_width() const { return width; }
|
||||
private:
|
||||
int width;
|
||||
};
|
||||
|
||||
struct ConfigWizardPage: wxPanel
|
||||
|
|
@ -66,15 +78,11 @@ struct ConfigWizardPage: wxPanel
|
|||
ConfigWizard *parent;
|
||||
const wxString shortname;
|
||||
wxBoxSizer *content;
|
||||
const unsigned indent;
|
||||
|
||||
ConfigWizardPage(ConfigWizard *parent, wxString title, wxString shortname);
|
||||
|
||||
ConfigWizardPage(ConfigWizard *parent, wxString title, wxString shortname, unsigned indent = 0);
|
||||
virtual ~ConfigWizardPage();
|
||||
|
||||
ConfigWizardPage* page_prev() const { return p_prev; }
|
||||
ConfigWizardPage* page_next() const { return p_next; }
|
||||
ConfigWizardPage* chain(ConfigWizardPage *page);
|
||||
|
||||
template<class T>
|
||||
void append(T *thing, int proportion = 0, int flag = wxEXPAND|wxTOP|wxBOTTOM, int border = 10)
|
||||
{
|
||||
|
|
@ -86,31 +94,49 @@ struct ConfigWizardPage: wxPanel
|
|||
|
||||
ConfigWizard::priv *wizard_p() const { return parent->p.get(); }
|
||||
|
||||
virtual bool Show(bool show = true);
|
||||
virtual bool Hide() { return Show(false); }
|
||||
virtual wxPanel* extra_buttons() { return nullptr; }
|
||||
virtual void on_page_set() {}
|
||||
virtual void apply_custom_config(DynamicPrintConfig &config) {}
|
||||
|
||||
void enable_next(bool enable);
|
||||
private:
|
||||
ConfigWizardPage *p_prev;
|
||||
ConfigWizardPage *p_next;
|
||||
};
|
||||
|
||||
struct PageWelcome: ConfigWizardPage
|
||||
{
|
||||
PrinterPicker *printer_picker;
|
||||
wxPanel *others_buttons;
|
||||
wxCheckBox *cbox_reset;
|
||||
|
||||
PageWelcome(ConfigWizard *parent, bool check_first_variant);
|
||||
|
||||
virtual wxPanel* extra_buttons() { return others_buttons; }
|
||||
virtual void on_page_set();
|
||||
PageWelcome(ConfigWizard *parent);
|
||||
|
||||
bool reset_user_profile() const { return cbox_reset != nullptr ? cbox_reset->GetValue() : false; }
|
||||
void on_variant_checked();
|
||||
};
|
||||
|
||||
struct PagePrinters: ConfigWizardPage
|
||||
{
|
||||
enum Technology {
|
||||
// Bitflag equivalent of PrinterTechnology
|
||||
T_FFF = 0x1,
|
||||
T_SLA = 0x2,
|
||||
T_Any = ~0,
|
||||
};
|
||||
|
||||
std::vector<PrinterPicker *> printer_pickers;
|
||||
|
||||
PagePrinters(ConfigWizard *parent, wxString title, wxString shortname, const VendorProfile &vendor, unsigned indent, Technology technology);
|
||||
|
||||
void select_all(bool select, bool alternates = false);
|
||||
int get_width() const;
|
||||
};
|
||||
|
||||
struct PageCustom: ConfigWizardPage
|
||||
{
|
||||
PageCustom(ConfigWizard *parent);
|
||||
|
||||
bool custom_wanted() const { return cb_custom->GetValue(); }
|
||||
std::string profile_name() const { return into_u8(tc_profile_name->GetValue()); }
|
||||
|
||||
private:
|
||||
static const char* default_profile_name;
|
||||
|
||||
wxCheckBox *cb_custom;
|
||||
wxTextCtrl *tc_profile_name;
|
||||
wxString profile_name_prev;
|
||||
|
||||
};
|
||||
|
||||
struct PageUpdate: ConfigWizardPage
|
||||
|
|
@ -127,10 +153,7 @@ struct PageVendors: ConfigWizardPage
|
|||
|
||||
PageVendors(ConfigWizard *parent);
|
||||
|
||||
virtual void on_page_set();
|
||||
|
||||
void on_vendor_pick(size_t i);
|
||||
void on_variant_checked();
|
||||
};
|
||||
|
||||
struct PageFirmware: ConfigWizardPage
|
||||
|
|
@ -174,21 +197,51 @@ class ConfigWizardIndex: public wxPanel
|
|||
public:
|
||||
ConfigWizardIndex(wxWindow *parent);
|
||||
|
||||
void load_items(ConfigWizardPage *firstpage);
|
||||
void set_active(ConfigWizardPage *page);
|
||||
void add_page(ConfigWizardPage *page);
|
||||
void add_label(wxString label, unsigned indent = 0);
|
||||
|
||||
size_t active_item() const { return item_active; }
|
||||
ConfigWizardPage* active_page() const;
|
||||
bool active_is_last() const { return item_active < items.size() && item_active == last_page; }
|
||||
|
||||
void go_prev();
|
||||
void go_next();
|
||||
void go_to(size_t i);
|
||||
void go_to(ConfigWizardPage *page);
|
||||
|
||||
void clear();
|
||||
|
||||
private:
|
||||
struct Item
|
||||
{
|
||||
wxString label;
|
||||
unsigned indent;
|
||||
ConfigWizardPage *page; // nullptr page => label-only item
|
||||
|
||||
bool operator==(ConfigWizardPage *page) const { return this->page == page; }
|
||||
};
|
||||
|
||||
int em;
|
||||
int em_h;
|
||||
|
||||
const wxBitmap bg;
|
||||
const wxBitmap bullet_black;
|
||||
const wxBitmap bullet_blue;
|
||||
const wxBitmap bullet_white;
|
||||
int text_height;
|
||||
|
||||
std::vector<wxString> items;
|
||||
std::vector<wxString>::const_iterator item_active;
|
||||
std::vector<Item> items;
|
||||
size_t item_active;
|
||||
ssize_t item_hover;
|
||||
size_t last_page;
|
||||
|
||||
int item_height() const { return std::max(bullet_black.GetSize().GetHeight(), em) + em; }
|
||||
|
||||
void on_paint(wxPaintEvent &evt);
|
||||
void on_mouse_move(wxMouseEvent &evt);
|
||||
};
|
||||
|
||||
wxDEFINE_EVENT(EVT_INDEX_PAGE, wxCommandEvent);
|
||||
|
||||
struct ConfigWizard::priv
|
||||
{
|
||||
ConfigWizard *q;
|
||||
|
|
@ -209,8 +262,13 @@ struct ConfigWizard::priv
|
|||
wxButton *btn_cancel = nullptr;
|
||||
|
||||
PageWelcome *page_welcome = nullptr;
|
||||
PagePrinters *page_fff = nullptr;
|
||||
PagePrinters *page_msla = nullptr;
|
||||
PageCustom *page_custom = nullptr;
|
||||
PageUpdate *page_update = nullptr;
|
||||
PageVendors *page_vendors = nullptr;
|
||||
PageVendors *page_vendors = nullptr; // XXX: ?
|
||||
|
||||
// Custom setup pages
|
||||
PageFirmware *page_firmware = nullptr;
|
||||
PageBedShape *page_bed = nullptr;
|
||||
PageDiameters *page_diams = nullptr;
|
||||
|
|
@ -218,17 +276,14 @@ struct ConfigWizard::priv
|
|||
|
||||
priv(ConfigWizard *q) : q(q) {}
|
||||
|
||||
void load_pages(bool custom_setup);
|
||||
|
||||
bool check_first_variant() const;
|
||||
void load_vendors();
|
||||
void add_page(ConfigWizardPage *page);
|
||||
void index_refresh();
|
||||
void set_page(ConfigWizardPage *page);
|
||||
void layout_fit();
|
||||
void go_prev() { if (page_current != nullptr) { set_page(page_current->page_prev()); } }
|
||||
void go_next() { if (page_current != nullptr) { set_page(page_current->page_next()); } }
|
||||
void enable_next(bool enable);
|
||||
|
||||
void on_other_vendors();
|
||||
void on_custom_setup();
|
||||
void on_custom_setup(bool custom_wanted);
|
||||
|
||||
void apply_config(AppConfig *app_config, PresetBundle *preset_bundle, const PresetUpdater *updater);
|
||||
};
|
||||
|
|
|
|||
|
|
@ -145,7 +145,11 @@ void Field::get_value_by_opt_type(wxString& str)
|
|||
double val;
|
||||
// Replace the first occurence of comma in decimal number.
|
||||
str.Replace(",", ".", false);
|
||||
if(!str.ToCDouble(&val))
|
||||
if (str == ".")
|
||||
val = 0.0;
|
||||
else
|
||||
{
|
||||
if (!str.ToCDouble(&val))
|
||||
{
|
||||
show_error(m_parent, _(L("Invalid numeric input.")));
|
||||
set_value(double_to_string(val), true);
|
||||
|
|
@ -157,6 +161,7 @@ void Field::get_value_by_opt_type(wxString& str)
|
|||
if (val > m_opt.max) val = m_opt.max;
|
||||
set_value(double_to_string(val), true);
|
||||
}
|
||||
}
|
||||
m_value = val;
|
||||
break; }
|
||||
case coString:
|
||||
|
|
@ -459,7 +464,7 @@ void SpinCtrl::BUILD() {
|
|||
// # As a workaround, we get the new value from $event->GetString and store
|
||||
// # here temporarily so that we can return it from $self->get_value
|
||||
std::string value = e.GetString().utf8_str().data();
|
||||
if (is_matched(value, "^\\d+$"))
|
||||
if (is_matched(value, "^\\-?\\d+$"))
|
||||
tmp_value = std::stoi(value);
|
||||
else tmp_value = -9999;
|
||||
#ifdef __WXOSX__
|
||||
|
|
@ -475,7 +480,7 @@ void SpinCtrl::BUILD() {
|
|||
|
||||
void SpinCtrl::propagate_value()
|
||||
{
|
||||
if (tmp_value < 0)
|
||||
if (tmp_value == -9999)
|
||||
on_kill_focus();
|
||||
else if (boost::any_cast<int>(m_value) != tmp_value)
|
||||
on_change_field();
|
||||
|
|
@ -867,8 +872,8 @@ void StaticText::BUILD()
|
|||
if (m_opt.height >= 0) size.SetHeight(m_opt.height);
|
||||
if (m_opt.width >= 0) size.SetWidth(m_opt.width);
|
||||
|
||||
wxString legend(static_cast<const ConfigOptionString*>(m_opt.default_value)->value);
|
||||
auto temp = new wxStaticText(m_parent, wxID_ANY, legend, wxDefaultPosition, size);
|
||||
const wxString legend(static_cast<const ConfigOptionString*>(m_opt.default_value)->value);
|
||||
auto temp = new wxStaticText(m_parent, wxID_ANY, legend, wxDefaultPosition, size, wxST_ELLIPSIZE_MIDDLE);
|
||||
temp->SetFont(wxGetApp().bold_font());
|
||||
|
||||
// // recast as a wxWindow to fit the calling convention
|
||||
|
|
|
|||
|
|
@ -141,8 +141,8 @@ bool GeometryBuffer::set_from_triangles(const Polygons& triangles, float z, bool
|
|||
float inv_size_y = -1.0f / size_y;
|
||||
for (unsigned int i = 0; i < m_tex_coords.size(); i += 2)
|
||||
{
|
||||
m_tex_coords[i] *= inv_size_x;
|
||||
m_tex_coords[i + 1] *= inv_size_y;
|
||||
m_tex_coords[i] = (m_tex_coords[i] - min_x) * inv_size_x;
|
||||
m_tex_coords[i + 1] = (m_tex_coords[i + 1] - min_y) * inv_size_y;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -595,11 +595,25 @@ void GLCanvas3D::Bed::_render_prusa(const std::string &key, float theta) const
|
|||
#endif // ENABLE_PRINT_BED_MODELS
|
||||
{
|
||||
std::string tex_path = resources_dir() + "/icons/bed/" + key;
|
||||
|
||||
// use higher resolution images if graphic card allows
|
||||
GLint max_tex_size;
|
||||
::glGetIntegerv(GL_MAX_TEXTURE_SIZE, &max_tex_size);
|
||||
|
||||
// temporary set to lowest resolution
|
||||
max_tex_size = 2048;
|
||||
|
||||
if (max_tex_size >= 8192)
|
||||
tex_path += "_8192";
|
||||
else if (max_tex_size >= 4096)
|
||||
tex_path += "_4096";
|
||||
|
||||
#if ENABLE_PRINT_BED_MODELS
|
||||
std::string model_path = resources_dir() + "/models/" + key;
|
||||
#endif // ENABLE_PRINT_BED_MODELS
|
||||
|
||||
#if ENABLE_ANISOTROPIC_FILTER_ON_BED_TEXTURES
|
||||
// use anisotropic filter if graphic card allows
|
||||
GLfloat max_anisotropy = 0.0f;
|
||||
if (glewIsSupported("GL_EXT_texture_filter_anisotropic"))
|
||||
::glGetFloatv(GL_MAX_TEXTURE_MAX_ANISOTROPY_EXT, &max_anisotropy);
|
||||
|
|
@ -646,11 +660,17 @@ void GLCanvas3D::Bed::_render_prusa(const std::string &key, float theta) const
|
|||
{
|
||||
filename = model_path + "_bed.stl";
|
||||
if ((m_model.get_filename() != filename) && m_model.init_from_file(filename, useVBOs)) {
|
||||
Vec3d offset = m_bounding_box.center() - Vec3d(0.0, 0.0, 0.1 + 0.5 * m_model.get_bounding_box().size()(2));
|
||||
Vec3d offset = m_bounding_box.center() - Vec3d(0.0, 0.0, 0.5 * m_model.get_bounding_box().size()(2));
|
||||
if (key == "mk2")
|
||||
offset.y() += 15. / 2.;
|
||||
// hardcoded value to match the stl model
|
||||
offset += Vec3d(0.0, 7.5, -0.03);
|
||||
else if (key == "mk3")
|
||||
offset += Vec3d(0., (19. - 8.) / 2., 2.);
|
||||
// hardcoded value to match the stl model
|
||||
offset += Vec3d(0.0, 5.5, 2.43);
|
||||
else if (key == "sl1")
|
||||
// hardcoded value to match the stl model
|
||||
offset += Vec3d(0.0, 0.0, -0.03);
|
||||
|
||||
m_model.center_around(offset);
|
||||
}
|
||||
|
||||
|
|
@ -5348,9 +5368,16 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt)
|
|||
p = p->GetParent();
|
||||
auto *top_level_wnd = dynamic_cast<wxTopLevelWindow*>(p);
|
||||
if (top_level_wnd && top_level_wnd->IsActive())
|
||||
{
|
||||
m_canvas->SetFocus();
|
||||
}
|
||||
|
||||
// forces a frame render to ensure that m_hover_volume_id is updated even when the user right clicks while
|
||||
// the context menu is shown, ensuring it to disappear if the mouse is outside any volume and to
|
||||
// change the volume hover state if any is under the mouse
|
||||
m_mouse.position = pos.cast<double>();
|
||||
render();
|
||||
}
|
||||
}
|
||||
m_mouse.set_start_position_2D_as_invalid();
|
||||
//#endif
|
||||
}
|
||||
|
|
@ -5479,7 +5506,6 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt)
|
|||
}
|
||||
|
||||
// propagate event through callback
|
||||
|
||||
if (m_hover_volume_id != -1)
|
||||
{
|
||||
if (evt.LeftDown() && m_moving_enabled && (m_mouse.drag.move_volume_idx == -1))
|
||||
|
|
@ -5498,9 +5524,9 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt)
|
|||
}
|
||||
else if (evt.RightDown())
|
||||
{
|
||||
m_mouse.position = pos.cast<double>();
|
||||
// forces a frame render to ensure that m_hover_volume_id is updated even when the user right clicks while
|
||||
// the context menu is already shown, ensuring it to disappear if the mouse is outside any volume
|
||||
m_mouse.position = Vec2d((double)pos(0), (double)pos(1));
|
||||
// the context menu is already shown
|
||||
render();
|
||||
if (m_hover_volume_id != -1)
|
||||
{
|
||||
|
|
@ -5514,14 +5540,14 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt)
|
|||
post_event(SimpleEvent(EVT_GLCANVAS_OBJECT_SELECT));
|
||||
_update_gizmos_data();
|
||||
wxGetApp().obj_manipul()->update_settings_value(m_selection);
|
||||
// forces a frame render to update the view before the context menu is shown
|
||||
render();
|
||||
// // forces a frame render to update the view before the context menu is shown
|
||||
// render();
|
||||
|
||||
Vec2d logical_pos = pos.cast<double>();
|
||||
#if ENABLE_RETINA_GL
|
||||
const float factor = m_retina_helper->get_scale_factor();
|
||||
logical_pos = logical_pos.cwiseQuotient(Vec2d(factor, factor));
|
||||
#endif
|
||||
#endif // ENABLE_RETINA_GL
|
||||
post_event(Vec2dEvent(EVT_GLCANVAS_RIGHT_CLICK, logical_pos));
|
||||
}
|
||||
}
|
||||
|
|
@ -5817,7 +5843,7 @@ void GLCanvas3D::set_tooltip(const std::string& tooltip) const
|
|||
else
|
||||
t->SetTip(tooltip);
|
||||
}
|
||||
else
|
||||
else if (!tooltip.empty()) // Avoid "empty" tooltips => unset of the empty tooltip leads to application crash under OSX
|
||||
m_canvas->SetToolTip(tooltip);
|
||||
}
|
||||
}
|
||||
|
|
@ -6150,7 +6176,6 @@ bool GLCanvas3D::_init_toolbar()
|
|||
item.name = "add";
|
||||
item.tooltip = GUI::L_str("Add...") + " [" + GUI::shortkey_ctrl_prefix() + "I]";
|
||||
item.sprite_id = 0;
|
||||
item.is_toggable = false;
|
||||
item.action_event = EVT_GLTOOLBAR_ADD;
|
||||
if (!m_toolbar.add_item(item))
|
||||
return false;
|
||||
|
|
@ -6158,7 +6183,6 @@ bool GLCanvas3D::_init_toolbar()
|
|||
item.name = "delete";
|
||||
item.tooltip = GUI::L_str("Delete") + " [Del]";
|
||||
item.sprite_id = 1;
|
||||
item.is_toggable = false;
|
||||
item.action_event = EVT_GLTOOLBAR_DELETE;
|
||||
if (!m_toolbar.add_item(item))
|
||||
return false;
|
||||
|
|
@ -6166,7 +6190,6 @@ bool GLCanvas3D::_init_toolbar()
|
|||
item.name = "deleteall";
|
||||
item.tooltip = GUI::L_str("Delete all") + " [" + GUI::shortkey_ctrl_prefix() + "Del]";
|
||||
item.sprite_id = 2;
|
||||
item.is_toggable = false;
|
||||
item.action_event = EVT_GLTOOLBAR_DELETE_ALL;
|
||||
if (!m_toolbar.add_item(item))
|
||||
return false;
|
||||
|
|
@ -6174,7 +6197,6 @@ bool GLCanvas3D::_init_toolbar()
|
|||
item.name = "arrange";
|
||||
item.tooltip = GUI::L_str("Arrange [A]");
|
||||
item.sprite_id = 3;
|
||||
item.is_toggable = false;
|
||||
item.action_event = EVT_GLTOOLBAR_ARRANGE;
|
||||
if (!m_toolbar.add_item(item))
|
||||
return false;
|
||||
|
|
@ -6185,7 +6207,6 @@ bool GLCanvas3D::_init_toolbar()
|
|||
item.name = "more";
|
||||
item.tooltip = GUI::L_str("Add instance [+]");
|
||||
item.sprite_id = 4;
|
||||
item.is_toggable = false;
|
||||
item.action_event = EVT_GLTOOLBAR_MORE;
|
||||
if (!m_toolbar.add_item(item))
|
||||
return false;
|
||||
|
|
@ -6193,7 +6214,6 @@ bool GLCanvas3D::_init_toolbar()
|
|||
item.name = "fewer";
|
||||
item.tooltip = GUI::L_str("Remove instance [-]");
|
||||
item.sprite_id = 5;
|
||||
item.is_toggable = false;
|
||||
item.action_event = EVT_GLTOOLBAR_FEWER;
|
||||
if (!m_toolbar.add_item(item))
|
||||
return false;
|
||||
|
|
@ -6204,7 +6224,6 @@ bool GLCanvas3D::_init_toolbar()
|
|||
item.name = "splitobjects";
|
||||
item.tooltip = GUI::L_str("Split to objects");
|
||||
item.sprite_id = 6;
|
||||
item.is_toggable = false;
|
||||
item.action_event = EVT_GLTOOLBAR_SPLIT_OBJECTS;
|
||||
if (!m_toolbar.add_item(item))
|
||||
return false;
|
||||
|
|
@ -6212,7 +6231,6 @@ bool GLCanvas3D::_init_toolbar()
|
|||
item.name = "splitvolumes";
|
||||
item.tooltip = GUI::L_str("Split to parts");
|
||||
item.sprite_id = 8;
|
||||
item.is_toggable = false;
|
||||
item.action_event = EVT_GLTOOLBAR_SPLIT_VOLUMES;
|
||||
if (!m_toolbar.add_item(item))
|
||||
return false;
|
||||
|
|
|
|||
|
|
@ -355,21 +355,6 @@ boost::filesystem::path into_path(const wxString &str)
|
|||
return boost::filesystem::path(str.wx_str());
|
||||
}
|
||||
|
||||
bool get_current_screen_size(wxWindow *window, unsigned &width, unsigned &height)
|
||||
{
|
||||
const auto idx = wxDisplay::GetFromWindow(window);
|
||||
if (idx == wxNOT_FOUND) {
|
||||
return false;
|
||||
}
|
||||
|
||||
wxDisplay display(idx);
|
||||
const auto disp_size = display.GetClientArea();
|
||||
width = disp_size.GetWidth();
|
||||
height = disp_size.GetHeight();
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
void about()
|
||||
{
|
||||
AboutDialog dlg;
|
||||
|
|
|
|||
|
|
@ -71,9 +71,6 @@ wxString from_path(const boost::filesystem::path &path);
|
|||
// boost path from wxString
|
||||
boost::filesystem::path into_path(const wxString &str);
|
||||
|
||||
// Returns the dimensions of the screen on which the main frame is displayed
|
||||
bool get_current_screen_size(wxWindow *window, unsigned &width, unsigned &height);
|
||||
|
||||
// Display an About dialog
|
||||
extern void about();
|
||||
// Ask the destop to open the datadir using the default file explorer.
|
||||
|
|
|
|||
|
|
@ -3,8 +3,10 @@
|
|||
#include "GUI_ObjectManipulation.hpp"
|
||||
#include "I18N.hpp"
|
||||
|
||||
#include <exception>
|
||||
#include <boost/lexical_cast.hpp>
|
||||
#include <boost/algorithm/string.hpp>
|
||||
#include <boost/log/trivial.hpp>
|
||||
|
||||
#include <wx/stdpaths.h>
|
||||
#include <wx/imagpng.h>
|
||||
|
|
@ -125,6 +127,10 @@ bool GUI_App::OnInit()
|
|||
app_config->save();
|
||||
|
||||
preset_updater = new PresetUpdater();
|
||||
Bind(EVT_SLIC3R_VERSION_ONLINE, [this](const wxCommandEvent &evt) {
|
||||
app_config->set("version_online", into_u8(evt.GetString()));
|
||||
app_config->save();
|
||||
});
|
||||
|
||||
load_language();
|
||||
|
||||
|
|
@ -181,7 +187,6 @@ bool GUI_App::OnInit()
|
|||
mainframe->Close();
|
||||
} catch (const std::exception &ex) {
|
||||
show_error(nullptr, ex.what());
|
||||
mainframe->Close();
|
||||
}
|
||||
});
|
||||
|
||||
|
|
@ -351,21 +356,10 @@ void GUI_App::persist_window_geometry(wxTopLevelWindow *window)
|
|||
});
|
||||
|
||||
window_pos_restore(window, name);
|
||||
#ifdef _WIN32
|
||||
// On windows, the wxEVT_SHOW is not received if the window is created maximized
|
||||
// cf. https://groups.google.com/forum/#!topic/wx-users/c7ntMt6piRI
|
||||
// so we sanitize the position right away
|
||||
window_pos_sanitize(window);
|
||||
#else
|
||||
// On other platforms on the other hand it's needed to wait before the window is actually on screen
|
||||
// and some initial round of events is complete otherwise position / display index is not reported correctly.
|
||||
window->Bind(wxEVT_SHOW, [=](wxShowEvent &event) {
|
||||
CallAfter([=]() {
|
||||
|
||||
on_window_geometry(window, [=]() {
|
||||
window_pos_sanitize(window);
|
||||
});
|
||||
event.Skip();
|
||||
});
|
||||
#endif
|
||||
}
|
||||
|
||||
void GUI_App::load_project(wxWindow *parent, wxString& input_file)
|
||||
|
|
@ -573,7 +567,10 @@ void GUI_App::add_config_menu(wxMenuBar *menu)
|
|||
mode_menu->AppendRadioItem(config_id_base + ConfigMenuModeSimple, _(L("Simple")), _(L("Simple View Mode")));
|
||||
mode_menu->AppendRadioItem(config_id_base + ConfigMenuModeAdvanced, _(L("Advanced")), _(L("Advanced View Mode")));
|
||||
mode_menu->AppendRadioItem(config_id_base + ConfigMenuModeExpert, _(L("Expert")), _(L("Expert View Mode")));
|
||||
mode_menu->Check(config_id_base + ConfigMenuModeSimple + get_mode(), true);
|
||||
Bind(wxEVT_UPDATE_UI, [this](wxUpdateUIEvent& evt) { evt.Check(get_mode() == comSimple); }, config_id_base + ConfigMenuModeSimple);
|
||||
Bind(wxEVT_UPDATE_UI, [this](wxUpdateUIEvent& evt) { evt.Check(get_mode() == comAdvanced); }, config_id_base + ConfigMenuModeAdvanced);
|
||||
Bind(wxEVT_UPDATE_UI, [this](wxUpdateUIEvent& evt) { evt.Check(get_mode() == comExpert); }, config_id_base + ConfigMenuModeExpert);
|
||||
|
||||
local_menu->AppendSubMenu(mode_menu, _(L("Mode")), _(L("Slic3r View Mode")));
|
||||
local_menu->AppendSeparator();
|
||||
local_menu->Append(config_id_base + ConfigMenuLanguage, _(L("Change Application &Language")));
|
||||
|
|
@ -692,6 +689,23 @@ void GUI_App::load_current_presets()
|
|||
}
|
||||
}
|
||||
|
||||
bool GUI_App::OnExceptionInMainLoop()
|
||||
{
|
||||
try {
|
||||
throw;
|
||||
} catch (const std::exception &ex) {
|
||||
const std::string error = (boost::format("Uncaught exception: %1%") % ex.what()).str();
|
||||
BOOST_LOG_TRIVIAL(error) << error;
|
||||
show_error(nullptr, from_u8(error));
|
||||
} catch (...) {
|
||||
const char *error = "Uncaught exception: Unknown error";
|
||||
BOOST_LOG_TRIVIAL(error) << error;
|
||||
show_error(nullptr, from_u8(error));
|
||||
}
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
#ifdef __APPLE__
|
||||
// wxWidgets override to get an event on open files.
|
||||
void GUI_App::MacOpenFiles(const wxArrayString &fileNames)
|
||||
|
|
|
|||
|
|
@ -137,6 +137,8 @@ public:
|
|||
bool checked_tab(Tab* tab);
|
||||
void load_current_presets();
|
||||
|
||||
virtual bool OnExceptionInMainLoop();
|
||||
|
||||
#ifdef __APPLE__
|
||||
// wxWidgets override to get an event on open files.
|
||||
void MacOpenFiles(const wxArrayString &fileNames) override;
|
||||
|
|
|
|||
|
|
@ -42,10 +42,9 @@ ObjectManipulation::ObjectManipulation(wxWindow* parent) :
|
|||
|
||||
// Objects(sub-objects) name
|
||||
def.label = L("Name");
|
||||
// def.type = coString;
|
||||
def.gui_type = "legend";
|
||||
def.tooltip = L("Object name");
|
||||
def.full_width = true;
|
||||
def.width = 200;
|
||||
def.default_value = new ConfigOptionString{ " " };
|
||||
m_og->append_single_option_line(Option(def, "object_name"));
|
||||
|
||||
|
|
@ -73,14 +72,8 @@ ObjectManipulation::ObjectManipulation(wxWindow* parent) :
|
|||
def.default_value = new ConfigOptionFloat(0.0);
|
||||
def.width = 50;
|
||||
|
||||
if (option_name == "Rotation")
|
||||
{
|
||||
def.min = -360;
|
||||
def.max = 360;
|
||||
}
|
||||
|
||||
// Add "uniform scaling" button in front of "Scale" option
|
||||
else if (option_name == "Scale") {
|
||||
if (option_name == "Scale") {
|
||||
line.near_label_widget = [this](wxWindow* parent) {
|
||||
auto btn = new PrusaLockButton(parent, wxID_ANY);
|
||||
btn->Bind(wxEVT_BUTTON, [btn, this](wxCommandEvent &event){
|
||||
|
|
@ -293,13 +286,13 @@ void ObjectManipulation::update_if_dirty()
|
|||
deg_rotation(i) = Geometry::rad2deg(m_new_rotation(i));
|
||||
}
|
||||
|
||||
if (m_cache.rotation(0) != m_new_rotation(0))
|
||||
if ((m_cache.rotation(0) != m_new_rotation(0)) || (m_new_rotation(0) == 0.0))
|
||||
m_og->set_value("rotation_x", double_to_string(deg_rotation(0), 2));
|
||||
|
||||
if (m_cache.rotation(1) != m_new_rotation(1))
|
||||
if ((m_cache.rotation(1) != m_new_rotation(1)) || (m_new_rotation(1) == 0.0))
|
||||
m_og->set_value("rotation_y", double_to_string(deg_rotation(1), 2));
|
||||
|
||||
if (m_cache.rotation(2) != m_new_rotation(2))
|
||||
if ((m_cache.rotation(2) != m_new_rotation(2)) || (m_new_rotation(2) == 0.0))
|
||||
m_og->set_value("rotation_z", double_to_string(deg_rotation(2), 2));
|
||||
|
||||
m_cache.rotation = deg_rotation;
|
||||
|
|
|
|||
|
|
@ -26,6 +26,28 @@ wxTopLevelWindow* find_toplevel_parent(wxWindow *window)
|
|||
return nullptr;
|
||||
}
|
||||
|
||||
void on_window_geometry(wxTopLevelWindow *tlw, std::function<void()> callback)
|
||||
{
|
||||
#ifdef _WIN32
|
||||
// On windows, the wxEVT_SHOW is not received if the window is created maximized
|
||||
// cf. https://groups.google.com/forum/#!topic/wx-users/c7ntMt6piRI
|
||||
// OTOH the geometry is available very soon, so we can call the callback right away
|
||||
callback();
|
||||
#elif defined __linux__
|
||||
tlw->Bind(wxEVT_SHOW, [=](wxShowEvent &evt) {
|
||||
// On Linux, the geometry is only available after wxEVT_SHOW + CallAfter
|
||||
// cf. https://groups.google.com/forum/?pli=1#!topic/wx-users/fERSXdpVwAI
|
||||
tlw->CallAfter([=]() { callback(); });
|
||||
evt.Skip();
|
||||
});
|
||||
#elif defined __APPLE__
|
||||
tlw->Bind(wxEVT_SHOW, [=](wxShowEvent &evt) {
|
||||
callback();
|
||||
evt.Skip();
|
||||
});
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
CheckboxFileDialog::ExtraPanel::ExtraPanel(wxWindow *parent)
|
||||
: wxPanel(parent, wxID_ANY)
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@
|
|||
#include <memory>
|
||||
#include <string>
|
||||
#include <ostream>
|
||||
#include <functional>
|
||||
|
||||
#include <boost/optional.hpp>
|
||||
|
||||
|
|
@ -24,6 +25,8 @@ namespace GUI {
|
|||
|
||||
wxTopLevelWindow* find_toplevel_parent(wxWindow *window);
|
||||
|
||||
void on_window_geometry(wxTopLevelWindow *tlw, std::function<void()> callback);
|
||||
|
||||
|
||||
class EventGuard
|
||||
{
|
||||
|
|
|
|||
|
|
@ -12,7 +12,6 @@
|
|||
|
||||
#include <wx/sizer.h>
|
||||
#include <wx/stattext.h>
|
||||
#include <wx/notebook.h>
|
||||
#include <wx/button.h>
|
||||
#include <wx/bmpcbox.h>
|
||||
#include <wx/statbox.h>
|
||||
|
|
@ -1092,7 +1091,7 @@ Plater::priv::priv(Plater *q, MainFrame *main_frame)
|
|||
: q(q)
|
||||
, main_frame(main_frame)
|
||||
, config(Slic3r::DynamicPrintConfig::new_from_defaults_keys({
|
||||
"bed_shape", "complete_objects", "extruder_clearance_radius", "skirts", "skirt_distance",
|
||||
"bed_shape", "complete_objects", "duplicate_distance", "extruder_clearance_radius", "skirts", "skirt_distance",
|
||||
"brim_width", "variable_layer_height", "serial_port", "serial_speed", "host_type", "print_host",
|
||||
"printhost_apikey", "printhost_cafile", "nozzle_diameter", "single_extruder_multi_material",
|
||||
"wipe_tower", "wipe_tower_x", "wipe_tower_y", "wipe_tower_width", "wipe_tower_rotation_angle",
|
||||
|
|
@ -1774,8 +1773,11 @@ void Plater::priv::arrange()
|
|||
// FIXME: I don't know how to obtain the minimum distance, it depends
|
||||
// on printer technology. I guess the following should work but it crashes.
|
||||
double dist = 6; //PrintConfig::min_object_distance(config);
|
||||
if(printer_technology == ptFFF) {
|
||||
dist = PrintConfig::min_object_distance(config);
|
||||
}
|
||||
|
||||
auto min_obj_distance = static_cast<coord_t>(dist/SCALING_FACTOR);
|
||||
auto min_obj_distance = coord_t(dist/SCALING_FACTOR);
|
||||
|
||||
const auto *bed_shape_opt = config->opt<ConfigOptionPoints>("bed_shape");
|
||||
|
||||
|
|
|
|||
|
|
@ -11,8 +11,10 @@
|
|||
#include <Windows.h>
|
||||
#endif /* _MSC_VER */
|
||||
|
||||
#include <algorithm>
|
||||
#include <fstream>
|
||||
#include <stdexcept>
|
||||
#include <unordered_map>
|
||||
#include <boost/format.hpp>
|
||||
#include <boost/filesystem.hpp>
|
||||
#include <boost/filesystem/fstream.hpp>
|
||||
|
|
@ -83,6 +85,16 @@ VendorProfile VendorProfile::from_ini(const boost::filesystem::path &path, bool
|
|||
return VendorProfile::from_ini(tree, path, load_all);
|
||||
}
|
||||
|
||||
static const std::unordered_map<std::string, std::string> pre_family_model_map {{
|
||||
{ "MK3", "MK3" },
|
||||
{ "MK3MMU2", "MK3" },
|
||||
{ "MK2.5", "MK2.5" },
|
||||
{ "MK2.5MMU2", "MK2.5" },
|
||||
{ "MK2S", "MK2" },
|
||||
{ "MK2SMM", "MK2" },
|
||||
{ "SL1", "SL1" },
|
||||
}};
|
||||
|
||||
VendorProfile VendorProfile::from_ini(const ptree &tree, const boost::filesystem::path &path, bool load_all)
|
||||
{
|
||||
static const std::string printer_model_key = "printer_model:";
|
||||
|
|
@ -128,11 +140,21 @@ VendorProfile VendorProfile::from_ini(const ptree &tree, const boost::filesystem
|
|||
VendorProfile::PrinterModel model;
|
||||
model.id = section.first.substr(printer_model_key.size());
|
||||
model.name = section.second.get<std::string>("name", model.id);
|
||||
auto technology_field = section.second.get<std::string>("technology", "FFF");
|
||||
|
||||
const char *technology_fallback = boost::algorithm::starts_with(model.id, "SL") ? "SLA" : "FFF";
|
||||
|
||||
auto technology_field = section.second.get<std::string>("technology", technology_fallback);
|
||||
if (! ConfigOptionEnum<PrinterTechnology>::from_string(technology_field, model.technology)) {
|
||||
BOOST_LOG_TRIVIAL(error) << boost::format("Vendor bundle: `%1%`: Invalid printer technology field: `%2%`") % id % technology_field;
|
||||
model.technology = ptFFF;
|
||||
}
|
||||
|
||||
model.family = section.second.get<std::string>("family", std::string());
|
||||
if (model.family.empty() && res.name == "Prusa Research") {
|
||||
// If no family is specified, it can be inferred for known printers
|
||||
const auto from_pre_map = pre_family_model_map.find(model.id);
|
||||
if (from_pre_map != pre_family_model_map.end()) { model.family = from_pre_map->second; }
|
||||
}
|
||||
#if 0
|
||||
// Remove SLA printers from the initial alpha.
|
||||
if (model.technology == ptSLA)
|
||||
|
|
@ -157,6 +179,20 @@ VendorProfile VendorProfile::from_ini(const ptree &tree, const boost::filesystem
|
|||
return res;
|
||||
}
|
||||
|
||||
std::vector<std::string> VendorProfile::families() const
|
||||
{
|
||||
std::vector<std::string> res;
|
||||
unsigned num_familiies = 0;
|
||||
|
||||
for (auto &model : models) {
|
||||
if (std::find(res.begin(), res.end(), model.family) == res.end()) {
|
||||
res.push_back(model.family);
|
||||
num_familiies++;
|
||||
}
|
||||
}
|
||||
|
||||
return res;
|
||||
}
|
||||
|
||||
// Suffix to be added to a modified preset name in the combo box.
|
||||
static std::string g_suffix_modified = " (modified)";
|
||||
|
|
|
|||
|
|
@ -54,13 +54,16 @@ public:
|
|||
std::string id;
|
||||
std::string name;
|
||||
PrinterTechnology technology;
|
||||
std::string family;
|
||||
std::vector<PrinterVariant> variants;
|
||||
|
||||
PrinterVariant* variant(const std::string &name) {
|
||||
for (auto &v : this->variants)
|
||||
if (v.name == name)
|
||||
return &v;
|
||||
return nullptr;
|
||||
}
|
||||
|
||||
const PrinterVariant* variant(const std::string &name) const { return const_cast<PrinterModel*>(this)->variant(name); }
|
||||
};
|
||||
std::vector<PrinterModel> models;
|
||||
|
|
@ -72,6 +75,7 @@ public:
|
|||
static VendorProfile from_ini(const boost::property_tree::ptree &tree, const boost::filesystem::path &path, bool load_all=true);
|
||||
|
||||
size_t num_variants() const { size_t n = 0; for (auto &model : models) n += model.variants.size(); return n; }
|
||||
std::vector<std::string> families() const;
|
||||
|
||||
bool operator< (const VendorProfile &rhs) const { return this->id < rhs.id; }
|
||||
bool operator==(const VendorProfile &rhs) const { return this->id == rhs.id; }
|
||||
|
|
|
|||
|
|
@ -244,7 +244,7 @@ void Http::priv::http_perform()
|
|||
::curl_easy_setopt(curl, CURLOPT_PROGRESSDATA, static_cast<void*>(this));
|
||||
#endif
|
||||
|
||||
::curl_easy_setopt(curl, CURLOPT_VERBOSE, get_logging_level() >= 4);
|
||||
::curl_easy_setopt(curl, CURLOPT_VERBOSE, get_logging_level() >= 5);
|
||||
|
||||
if (headerlist != nullptr) {
|
||||
::curl_easy_setopt(curl, CURLOPT_HTTPHEADER, headerlist);
|
||||
|
|
|
|||
|
|
@ -13,7 +13,6 @@
|
|||
#include <boost/log/trivial.hpp>
|
||||
|
||||
#include <wx/app.h>
|
||||
#include <wx/event.h>
|
||||
#include <wx/msgdlg.h>
|
||||
|
||||
#include "libslic3r/libslic3r.h"
|
||||
|
|
@ -90,9 +89,25 @@ struct Updates
|
|||
std::vector<Update> updates;
|
||||
};
|
||||
|
||||
static Semver get_slic3r_version()
|
||||
{
|
||||
auto res = Semver::parse(SLIC3R_VERSION);
|
||||
|
||||
if (! res) {
|
||||
const char *error = "Could not parse Slic3r version string: " SLIC3R_VERSION;
|
||||
BOOST_LOG_TRIVIAL(error) << error;
|
||||
throw std::runtime_error(error);
|
||||
}
|
||||
|
||||
return *res;
|
||||
}
|
||||
|
||||
wxDEFINE_EVENT(EVT_SLIC3R_VERSION_ONLINE, wxCommandEvent);
|
||||
|
||||
|
||||
struct PresetUpdater::priv
|
||||
{
|
||||
const Semver ver_slic3r;
|
||||
std::vector<Index> index_db;
|
||||
|
||||
bool enabled_version_check;
|
||||
|
|
@ -122,12 +137,13 @@ struct PresetUpdater::priv
|
|||
static void copy_file(const fs::path &from, const fs::path &to);
|
||||
};
|
||||
|
||||
PresetUpdater::priv::priv() :
|
||||
had_config_update(false),
|
||||
cache_path(fs::path(Slic3r::data_dir()) / "cache"),
|
||||
rsrc_path(fs::path(resources_dir()) / "profiles"),
|
||||
vendor_path(fs::path(Slic3r::data_dir()) / "vendor"),
|
||||
cancel(false)
|
||||
PresetUpdater::priv::priv()
|
||||
: ver_slic3r(get_slic3r_version())
|
||||
, had_config_update(false)
|
||||
, cache_path(fs::path(Slic3r::data_dir()) / "cache")
|
||||
, rsrc_path(fs::path(resources_dir()) / "profiles")
|
||||
, vendor_path(fs::path(Slic3r::data_dir()) / "vendor")
|
||||
, cancel(false)
|
||||
{
|
||||
set_download_prefs(GUI::wxGetApp().app_config);
|
||||
check_install_indices();
|
||||
|
|
@ -209,11 +225,10 @@ void PresetUpdater::priv::sync_version() const
|
|||
.on_complete([&](std::string body, unsigned /* http_status */) {
|
||||
boost::trim(body);
|
||||
BOOST_LOG_TRIVIAL(info) << boost::format("Got Slic3rPE online version: `%1%`. Sending to GUI thread...") % body;
|
||||
// wxCommandEvent* evt = new wxCommandEvent(version_online_event);
|
||||
// evt->SetString(body);
|
||||
// GUI::get_app()->QueueEvent(evt);
|
||||
GUI::wxGetApp().app_config->set("version_online", body);
|
||||
GUI::wxGetApp().app_config->save();
|
||||
|
||||
wxCommandEvent* evt = new wxCommandEvent(EVT_SLIC3R_VERSION_ONLINE);
|
||||
evt->SetString(GUI::from_u8(body));
|
||||
GUI::wxGetApp().QueueEvent(evt);
|
||||
})
|
||||
.perform_sync();
|
||||
}
|
||||
|
|
@ -260,7 +275,7 @@ void PresetUpdater::priv::sync_config(const std::set<VendorProfile> vendors)
|
|||
continue;
|
||||
}
|
||||
if (new_index.version() < index.version()) {
|
||||
BOOST_LOG_TRIVIAL(error) << boost::format("The downloaded index %1% for vendor %2% is older than the active one. Ignoring the downloaded index.") % idx_path_temp % vendor.name;
|
||||
BOOST_LOG_TRIVIAL(warning) << boost::format("The downloaded index %1% for vendor %2% is older than the active one. Ignoring the downloaded index.") % idx_path_temp % vendor.name;
|
||||
continue;
|
||||
}
|
||||
Slic3r::rename_file(idx_path_temp, idx_path);
|
||||
|
|
@ -275,6 +290,7 @@ void PresetUpdater::priv::sync_config(const std::set<VendorProfile> vendors)
|
|||
BOOST_LOG_TRIVIAL(error) << boost::format("No recommended version for vendor: %1%, invalid index?") % vendor.name;
|
||||
continue;
|
||||
}
|
||||
|
||||
const auto recommended = recommended_it->config_version;
|
||||
|
||||
BOOST_LOG_TRIVIAL(debug) << boost::format("Got index for vendor: %1%: current version: %2%, recommended version: %3%")
|
||||
|
|
@ -341,7 +357,8 @@ Updates PresetUpdater::priv::get_config_updates() const
|
|||
if (ver_current == idx.end()) {
|
||||
auto message = (boost::format("Preset bundle `%1%` version not found in index: %2%") % idx.vendor() % vp.config_version.to_string()).str();
|
||||
BOOST_LOG_TRIVIAL(error) << message;
|
||||
throw std::runtime_error(message);
|
||||
GUI::show_error(nullptr, GUI::from_u8(message));
|
||||
continue;
|
||||
}
|
||||
|
||||
// Getting a recommended version from the latest index, wich may have been downloaded
|
||||
|
|
@ -528,18 +545,14 @@ void PresetUpdater::slic3r_update_notify()
|
|||
}
|
||||
|
||||
auto* app_config = GUI::wxGetApp().app_config;
|
||||
const auto ver_slic3r = Semver::parse(SLIC3R_VERSION);
|
||||
const auto ver_online_str = app_config->get("version_online");
|
||||
const auto ver_online = Semver::parse(ver_online_str);
|
||||
const auto ver_online_seen = Semver::parse(app_config->get("version_online_seen"));
|
||||
if (! ver_slic3r) {
|
||||
throw std::runtime_error("Could not parse Slic3r version string: " SLIC3R_VERSION);
|
||||
}
|
||||
|
||||
if (ver_online) {
|
||||
// Only display the notification if the version available online is newer AND if we haven't seen it before
|
||||
if (*ver_online > *ver_slic3r && (! ver_online_seen || *ver_online_seen < *ver_online)) {
|
||||
GUI::MsgUpdateSlic3r notification(*ver_slic3r, *ver_online);
|
||||
if (*ver_online > p->ver_slic3r && (! ver_online_seen || *ver_online_seen < *ver_online)) {
|
||||
GUI::MsgUpdateSlic3r notification(p->ver_slic3r, *ver_online);
|
||||
notification.ShowModal();
|
||||
if (notification.disable_version_check()) {
|
||||
app_config->set("version_check", "0");
|
||||
|
|
|
|||
|
|
@ -4,6 +4,8 @@
|
|||
#include <memory>
|
||||
#include <vector>
|
||||
|
||||
#include <wx/event.h>
|
||||
|
||||
namespace Slic3r {
|
||||
|
||||
|
||||
|
|
@ -37,6 +39,8 @@ private:
|
|||
std::unique_ptr<priv> p;
|
||||
};
|
||||
|
||||
wxDECLARE_EVENT(EVT_SLIC3R_VERSION_ONLINE, wxCommandEvent);
|
||||
|
||||
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue