3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-07 06:57:36 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 1

Merge branch 'main' into enh-port-edit-gcode-dlg

Browse source
This commit is contained in:
SoftFever 2024-01-02 18:23:52 +08:00 • committed by GitHub
commit 02258b4391
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
15 changed files with 93 additions and 34 deletions
Download patch file Download diff file Expand all files Collapse all files

14
src/libslic3r/PrintConfig.cpp
View file

@ -4540,6 +4540,20 @@ def = this->add("filament_loading_speed", coFloats);
def->min = 0;
def->set_default_value(new ConfigOptionPercent(25));
def = this->add("min_length_factor", coFloat);
def->label = L("Minimum wall length");
def->category = L("Quality");
def->tooltip = L("Adjust this value to prevent short, unclosed walls from being printed, which could increase print time. "
"Higher values remove more and longer walls.\n\n"
"NOTE: Bottom and top surfaces will not be affected by this value to prevent visual gaps on the ouside of the model. "
"Adjust 'One wall threshold' in the Advanced settings below to adjust the sensitivity of what is considered a top-surface. "
"'One wall threshold' is only visibile if this setting is set above the default value of 0.5, or if single-wall top surfaces is enabled.");
def->sidetext = L("");
def->mode = comAdvanced;
def->min = 0.0;
def->max = 25.0;
def->set_default_value(new ConfigOptionFloat(0.5));
def = this->add("initial_layer_min_bead_width", coPercent);
def->label = L("First layer minimum wall width");
def->category = L("Quality");