mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-11-02 20:52:20 -07:00
907d064684
They share the same profiles. They should also have the same settings in the variants, but this is not automatically shared for some reason. Contributes to issue CURA-3650.
64 lines
1.8 KiB
INI
64 lines
1.8 KiB
INI
[general]
|
|
name = AA 0.8
|
|
version = 2
|
|
definition = ultimaker3_extended
|
|
|
|
[metadata]
|
|
author = ultimaker
|
|
type = variant
|
|
|
|
[values]
|
|
acceleration_enabled = True
|
|
acceleration_print = 4000
|
|
brim_width = 7
|
|
cool_fan_speed = 7
|
|
cool_fan_speed_max = 100
|
|
cool_min_speed = 5
|
|
default_material_print_temperature = 200
|
|
infill_before_walls = False
|
|
infill_line_width = =round(line_width * 0.6 / 0.7, 2)
|
|
infill_overlap = 0
|
|
infill_pattern = triangles
|
|
infill_wipe_dist = 0
|
|
jerk_enabled = True
|
|
jerk_print = 25
|
|
jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
|
|
jerk_wall = =math.ceil(jerk_print * 25 / 25)
|
|
jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
|
|
layer_height = 0.2
|
|
line_width = =machine_nozzle_size
|
|
machine_min_cool_heat_time_window = 15
|
|
machine_nozzle_cool_down_speed = 0.85
|
|
machine_nozzle_heat_up_speed = 1.5
|
|
machine_nozzle_size = 0.8
|
|
material_final_print_temperature = =material_print_temperature - 10
|
|
material_initial_print_temperature = =material_print_temperature - 5
|
|
material_standby_temperature = 100
|
|
multiple_mesh_overlap = 0
|
|
prime_tower_enable = False
|
|
prime_tower_size = 16
|
|
prime_tower_wipe_enabled = True
|
|
retract_at_layer_change = True
|
|
retraction_amount = 6.5
|
|
retraction_count_max = 25
|
|
retraction_extrusion_window = 1
|
|
retraction_hop = 2
|
|
retraction_hop_enabled = True
|
|
retraction_hop_only_when_collides = True
|
|
skin_overlap = 5
|
|
speed_equalize_flow_enabled = True
|
|
speed_layer_0 = 20
|
|
speed_print = 35
|
|
speed_topbottom = =math.ceil(speed_print * 25 / 35)
|
|
speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
|
|
support_angle = 60
|
|
support_bottom_distance = =support_z_distance / 2
|
|
support_pattern = zigzag
|
|
support_top_distance = =support_z_distance
|
|
support_z_distance = =layer_height * 2
|
|
switch_extruder_retraction_amount = 16.5
|
|
top_bottom_thickness = 1.4
|
|
travel_avoid_distance = 3
|
|
wall_0_inset = 0
|
|
wall_line_width_x = =wall_line_width
|
|
wall_thickness = 2
|