mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-10 15:25:09 -06:00
4a5673746c
These are overrides of default_value while there is a value defined. As such these overrides had no effect at all. Changing them to value can actually change the behaviour of the profile. That is not what the profile author has apparently tested with, so I'm not doing that. I'm just removing the unused data. In the future if we get new definitions the author gets notified of the error so that he may test more effectively. The legacy can't be fixed without re-testing, so I'm leaving that to the authors. Done during Turbo Testing & Tooling. I want to go home for the weekend now...
41 lines
No EOL
2.3 KiB
JSON
41 lines
No EOL
2.3 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Hello BEE Prusa",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "BEEVERYCREATIVE",
|
|
"manufacturer": "BEEVERYCREATIVE",
|
|
"platform": "BEEVERYCREATIVE-helloBEEprusa.stl",
|
|
"platform_offset": [-226, -75, -196],
|
|
"file_formats": "text/x-gcode",
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "hBp_extruder_left",
|
|
"1": "hBp_extruder_right"
|
|
}
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_extruder_count": { "default_value": 2 },
|
|
"machine_name": { "default_value": "hello BEE prusa" },
|
|
"machine_start_gcode": { "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM107 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG92 E0 ;zero the extruded length\nG1 F3600 ;set feedrate to 60 mm/sec\nM420 S1 \n; -- end of START GCODE --" },
|
|
"machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nM140 S0 ;set bed temperature to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nM84 ;turn off steppers\n; -- end of END GCODE --" },
|
|
"machine_width": { "default_value": 185 },
|
|
"machine_depth": { "default_value": 200 },
|
|
"machine_height": { "default_value": 190 },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"layer_height": { "default_value": 0.2 },
|
|
"layer_height_0": { "default_value": 0.2 },
|
|
"wall_thickness": { "default_value": 1.2 },
|
|
"top_bottom_thickness": { "default_value": 1.2 },
|
|
"infill_sparse_density": { "default_value": 20 },
|
|
"speed_print": { "default_value": 60 },
|
|
"skirt_line_count": { "default_value": 4 },
|
|
"skirt_brim_minimal_length": { "default_value": 30 },
|
|
"skirt_gap": { "default_value": 6 },
|
|
"retraction_speed": { "default_value": 15.0},
|
|
"retraction_amount": { "default_value": 1.5}
|
|
}
|
|
} |