mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-10 15:25:09 -06:00
4b4f971222
This should make it a bit easier for others to create a new definition since there is less for them to 'have to know'. Previously they would be required to fill in as category Other, but now they can just leave the category out.
80 lines
2.7 KiB
JSON
80 lines
2.7 KiB
JSON
{
|
|
"id": "easyarts_ares",
|
|
"name": "EasyArts Ares",
|
|
"version": 2,
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "nliaudat",
|
|
"manufacturer": "EasyArts (discontinued)",
|
|
"file_formats": "text/x-gcode"
|
|
},
|
|
"overrides": {
|
|
"machine_start_gcode": {
|
|
"default_value": "; -- START GCODE --\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 \nG29 Z0.12 ;Auto-bedleveling with Z offset \nG92 E0 ;zero the extruded length \nG1 F2000 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\nM117 Printing...\n; -- end of START GCODE --"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "; -- START GCODE --\nG28 ; Home all axes\nM104 S0 ;extruder heater off\n;M140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n;M84 ;steppers off\nG90 ;absolute positioning\n; -- end of START GCODE --"
|
|
},
|
|
"machine_width": {
|
|
"default_value": 180
|
|
},
|
|
"machine_depth": {
|
|
"default_value": 180
|
|
},
|
|
"machine_height": {
|
|
"default_value": 200
|
|
},
|
|
"machine_heated_bed": {
|
|
"default_value": false
|
|
},
|
|
"machine_center_is_zero": {
|
|
"default_value": true
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default_value": "RepRap"
|
|
},
|
|
"layer_height": {
|
|
"default_value": 0.2
|
|
},
|
|
"layer_height_0": {
|
|
"default_value": 0.2
|
|
},
|
|
"wall_thickness": {
|
|
"default_value": 1
|
|
},
|
|
"top_bottom_thickness": {
|
|
"default_value": 1
|
|
},
|
|
"bottom_thickness": {
|
|
"default_value": 1
|
|
},
|
|
"material_diameter": {
|
|
"default_value": 1.75
|
|
},
|
|
"machine_nozzle_size": {
|
|
"default_value": 0.4
|
|
},
|
|
"speed_print": {
|
|
"default_value": 75
|
|
},
|
|
"speed_infill": {
|
|
"default_value": 100
|
|
},
|
|
"speed_wall": {
|
|
"default_value": 25
|
|
},
|
|
"speed_topbottom": {
|
|
"default_value": 15
|
|
},
|
|
"speed_travel": {
|
|
"default_value": 150
|
|
},
|
|
"speed_layer_0": {
|
|
"default_value": 30
|
|
},
|
|
"support_enable": {
|
|
"default_value": true
|
|
}
|
|
}
|
|
}
|