3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2026-02-16 09:29:34 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 10
Cura/resources/definitions/biqu_base.def.json
Jaime van Kessel 2c331604e8
Clean up a lot of duplicate settings from machine profiles 
These were errors that were copy pasted from other definitions. So leaving them as is would
continue to decrease the quality of third party profiles.
2022-09-06 11:39:08 +02:00

154 lines
7.7 KiB
JSON
Executable file
Raw Blame History

{
"name": "Biqu Base Printer",
"version": 2,
"inherits": "fdmprinter",
"metadata": {
"visible": false,
"author": "Luke Harrison",
"manufacturer": "Biqu",
"file_formats": "text/x-gcode",
"first_start_actions": ["MachineSettingsAction"],
"machine_extruder_trains": {
"0": "biqu_base_extruder_0"
},
"has_materials": true,
"has_variants": true,
"has_machine_quality": true,
"variants_name": "Nozzle Diameter",
"preferred_variant_name": "0.4mm Nozzle",
"preferred_quality_type": "standard",
"preferred_material": "generic_pla_175"
},
"overrides": {
"machine_name": { "default_value": "BIQU Base Printer" },
"machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
"machine_end_gcode": { "default_value": " ;BIQU Default End Gcode\nG91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract a bit more and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z by 10mm\nG90 ;Return to absolute positioning\n\nG1 X0 Y{machine_depth} ;TaDaaaa\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
"machine_max_feedrate_x": { "value": 500 },
"machine_max_feedrate_y": { "value": 500 },
"machine_max_feedrate_z": { "value": 10 },
"machine_max_feedrate_e": { "value": 75 },
"machine_max_acceleration_x": { "value": 500 },
"machine_max_acceleration_y": { "value": 500 },
"machine_max_acceleration_z": { "value": 100 },
"machine_max_acceleration_e": { "value": 5000 },
"machine_acceleration": { "value": 500 },
"machine_max_jerk_xy": { "value": 10 },
"machine_max_jerk_z": { "value": 0.4 },
"machine_max_jerk_e": { "value": 5 },
"machine_heated_bed": { "default_value": true },
"material_diameter": { "default_value": 1.75 },
"acceleration_print": { "value": 500 },
"acceleration_travel": { "value": 500 },
"acceleration_travel_layer_0": { "value": "acceleration_travel" },
"acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
"jerk_print": { "value": 8 },
"jerk_travel": { "value": "jerk_print" },
"jerk_travel_layer_0": { "value": "jerk_travel" },
"acceleration_enabled": { "value": false },
"jerk_enabled": { "value": false },
"speed_print": { "value": 50.0 } ,
"speed_wall_x": { "value": "speed_wall" },
"speed_roofing": { "value": "speed_topbottom" },
"speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
"speed_layer_0": { "value": 20.0 },
"speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
"speed_prime_tower": { "value": "speed_topbottom" },
"speed_support": { "value": "speed_wall_0" },
"speed_support_interface": { "value": "speed_topbottom" },
"speed_z_hop": { "value": 5 },
"skirt_brim_speed": { "value": "speed_layer_0" },
"optimize_wall_printing_order": { "value": "True" },
"material_initial_print_temperature": { "value": "material_print_temperature" },
"material_final_print_temperature": { "value": "material_print_temperature" },
"z_seam_type": { "value": "'sharpest_corner'" },
"z_seam_corner": { "value": "'z_seam_corner_inner'" },
"infill_line_width": { "value": "line_width * 1.2" },
"infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
"infill_before_walls": { "value": false },
"infill_overlap": { "value": 30.0 },
"skin_overlap": { "value": 10.0 },
"infill_wipe_dist": { "value": 0.0 },
"wall_0_wipe_dist": { "value": 0.0 },
"fill_outline_gaps": { "value": false },
"retraction_speed": {
"maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
"maximum_value": 200
},
"retraction_retract_speed": {
"maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
"maximum_value": 200
},
"retraction_prime_speed": {
"maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
"maximum_value": 200
},
"retraction_hop": { "value": 0.2 },
"retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
"retraction_combing_max_distance": { "value": 30 },
"travel_avoid_other_parts": { "value": true },
"travel_avoid_supports": { "value": true },
"travel_retract_before_outer_wall": { "value": true },
"retraction_count_max": { "value": 100 },
"retraction_extrusion_window": { "value": 10 },
"retraction_min_travel": { "value": 1.5 },
"cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
"cool_min_layer_time": { "value": 10 },
"adhesion_type": { "value": "'skirt'" },
"brim_replaces_support": { "value": false },
"skirt_gap": { "value": 10.0 },
"skirt_line_count": { "value": 3 },
"adaptive_layer_height_variation": { "value": 0.04 },
"adaptive_layer_height_variation_step": { "value": 0.04 },
"meshfix_maximum_resolution": { "value": "0.25" },
"meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
"support_angle": { "value": "math.floor(math.degrees(math.atan(line_width / 2.0 / layer_height)))" },
"support_pattern": { "value": "'zigzag'" },
"support_infill_rate": { "value": "0 if support_structure == 'tree' else 20" },
"support_use_towers": { "value": false },
"support_xy_distance": { "value": "wall_line_width_0 * 2" },
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
"support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height * 2" },
"support_xy_overrides_z": { "value": "'xy_overrides_z'" },
"support_wall_count": { "value": 1 },
"support_brim_enable": { "value": true },
"support_brim_width": { "value": 4 },
"support_interface_enable": { "value": true },
"support_interface_height": { "value": "layer_height * 4" },
"support_interface_density": { "value": 75 },
"support_interface_pattern": { "value": "'grid'" },
"support_interface_skip_height": { "value": 0.2 },
"minimum_support_area": { "value": 2 },
"minimum_interface_area": { "value": 10 },
"top_bottom_thickness": {"value": "layer_height_0 + layer_height * 3" },
"wall_thickness": {"value": "line_width * 2" }
}
}
Reference in a new issue View git blame Copy permalink