mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-10 07:15:03 -06:00
4b4f971222
This should make it a bit easier for others to create a new definition since there is less for them to 'have to know'. Previously they would be required to fill in as category Other, but now they can just leave the category out.
64 lines
3.7 KiB
JSON
64 lines
3.7 KiB
JSON
{
|
|
"id": "typeamachines",
|
|
"version": 2,
|
|
"name": "Type A Machines Series 1 2014",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "typeamachines",
|
|
"manufacturer": "typeamachines",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "tam_series1.stl",
|
|
"platform_offset": [-580.0, -6.23, 253.5],
|
|
"has_materials": false,
|
|
"supported_actions":["UpgradeFirmware"]
|
|
},
|
|
"overrides": {
|
|
"machine_name": { "default_value": "TypeAMachines" },
|
|
|
|
"layer_height": { "default_value": 0.2 },
|
|
"layer_height_0": { "default_value": 0.3 },
|
|
"infill_sparse_density": { "default_value": 5 },
|
|
"wall_thickness": { "default_value": 1 },
|
|
"top_bottom_thickness": { "default_value": 1 },
|
|
|
|
"infill_pattern": { "value": "'tetrahedral'" },
|
|
|
|
"machine_width": { "default_value": 305 },
|
|
"machine_depth": { "default_value": 305 },
|
|
"machine_height": { "default_value": 305 },
|
|
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_head_with_fans_polygon": { "default_value": [ [ -35, 65 ], [ -35, -55 ], [ 55, 65 ], [ 55, -55 ] ] },
|
|
"gantry_height": { "default_value": 35 },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
|
|
"speed_print": { "default_value": 60 },
|
|
"speed_travel": { "default_value": 200 },
|
|
|
|
"retraction_amount": { "default_value": 0.4 },
|
|
"retraction_speed": { "default_value": 35},
|
|
|
|
"xy_offset": { "default_value": -0.01 },
|
|
|
|
"machine_use_extruder_offset_to_offset_coords": { "default_value": true },
|
|
|
|
"material_diameter": { "default_value": 1.75 },
|
|
"machine_nozzle_tip_outer_diameter": { "default_value": 1 },
|
|
"machine_nozzle_head_distance": { "default_value": 3 },
|
|
"machine_nozzle_expansion_angle": { "default_value": 45 },
|
|
|
|
"machine_max_acceleration_x": { "default_value": 6000 },
|
|
"machine_max_acceleration_y": { "default_value": 6000 },
|
|
"machine_max_acceleration_z": { "default_value": 12000 },
|
|
"machine_max_acceleration_e": { "default_value": 175 },
|
|
|
|
"machine_start_gcode": {
|
|
"default_value": ";-- START GCODE --\n;Sliced for Type A Machines Series 1\n;Sliced at: {day} {date} {time}\n;Basic settings:\n;Layer height: {layer_height}\n;Walls: {wall_thickness}\n;Fill: {fill_distance}\n;Print Speed: {print_speed}\n;Support: {support}\n;Retraction Speed: {retraction_speed}\n;Retraction Distance: {retraction_amount}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Settings based on: {material_profile}\nG21 ;metric values\nG90 ;absolute positioning\nG28 ;move to endstops\nG29 ;allows for auto-levelling\nG1 Z15.0 F12000 ;move the platform down 15mm\nG1 X150 Y5 F9000 ;center\nM140 S{material_bed_temperature} ;Prep Heat Bed\nM109 S{default_material_print_temperature} ;Heat To temp\nM190 S{material_bed_temperature} ;Heat Bed to temp\nG1 X150 Y5 Z0.3 ;move the platform to purge extrusion\nG92 E0 ;zero the extruded length\nG1 F200 X250 E30 ;extrude 30mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 X150 Y150 Z25 F12000 ;recenter and begin\nG1 F9000"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
|
}
|
|
}
|
|
}
|