mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-10 15:25:09 -06:00
4b4f971222
This should make it a bit easier for others to create a new definition since there is less for them to 'have to know'. Previously they would be required to fill in as category Other, but now they can just leave the category out.
60 lines
3.1 KiB
JSON
60 lines
3.1 KiB
JSON
{
|
|
"id": "robo_3d_r1",
|
|
"name": "Robo 3D R1",
|
|
"version": 2,
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "Ultimaker",
|
|
"manufacturer": "Robo 3D",
|
|
"file_formats": "text/x-gcode",
|
|
"platform_offset": [ 0, 0, 0]
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_start_gcode": {
|
|
"default_value": " G92 E0 ;\n M565 Z-1 ;\n G1 Z5 F5000 ;\n G29 ;\n"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": " M104 S0 ;extruder heater off\n M140 S0 ;heated bed heater off (if you have it)\n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning\n"
|
|
},
|
|
"cool_min_layer_time": { "default_value": 7 },
|
|
"speed_topbottom": { "default_value": 40 },
|
|
"retraction_speed": { "default_value": 50 },
|
|
"layer_0_z_overlap": { "default_value": 0.2 },
|
|
"cool_min_speed": { "default_value": 19 },
|
|
"material_bed_temperature": { "default_value": 60 },
|
|
"support_angle": { "default_value": 50 },
|
|
"speed_layer_0": { "default_value": 30 },
|
|
"line_width": { "default_value": 0.4 },
|
|
"speed_infill": { "default_value": 60 },
|
|
"prime_tower_size": { "default_value": 8.660254037844387 },
|
|
"support_enable": { "default_value": true },
|
|
"cool_fan_full_at_height": { "default_value": 0.1 },
|
|
"material_diameter": { "default_value": 1.75 },
|
|
"bottom_thickness": { "default_value": 1.2 },
|
|
"raft_airgap": { "default_value": 0.2 },
|
|
"layer_height_0": { "default_value": 0.15 },
|
|
"top_thickness": { "default_value": 1.2 },
|
|
"speed_wall_0": { "default_value": 40 },
|
|
"retraction_min_travel": { "default_value": 5 },
|
|
"material_flow": { "default_value": 100 },
|
|
"infill_sparse_density": { "default_value": 10 },
|
|
"wall_thickness": { "default_value": 1.2 },
|
|
"material_print_temperature": { "default_value": 190 },
|
|
"retraction_amount": { "default_value": 3 },
|
|
"layer_height": { "default_value": 0.2 },
|
|
"speed_print": { "default_value": 40 },
|
|
"machine_extruder_count": { "default_value": 1 },
|
|
"retraction_combing": { "default_value": "off" },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_height": { "default_value": 210 },
|
|
"adhesion_type": { "default_value": "raft" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_depth": { "default_value": 245 },
|
|
"machine_width": { "default_value": 225 },
|
|
"support_z_distance": { "default_value": 0.22 },
|
|
"machine_name": { "default_value": "ROBO 3D R1" }
|
|
}
|
|
}
|