mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-09 23:05:01 -06:00
cd58703dca
With the changes from https://github.com/Ultimaker/Cura/pull/15692 logic regarding the exclude materials printer setting changed. It has never worked properly before. Now that it works properly again a ton of materials were excluded that were never intended to be excluded. As we can never be sure if an exclude material was intended or not we decided to be pretty agressive in removing exclude materials. This way the behavior is closed to the behavior prior to the exclude material fix. There was one case were we decide to leave an exclude material in. If a printer has a material diameter of `175` *and* the material would specifically specify the `175` substring (e.g. `dsm_arnitel2045_175`). When this is the case we were pretty certain it was intended to exclude this material. CURA-10599
167 lines
No EOL
8.6 KiB
JSON
167 lines
No EOL
8.6 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Signal Pro Base",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": false,
|
|
"author": "ATMAT",
|
|
"manufacturer": "ATMAT sp. z o.o.",
|
|
"file_formats": "text/x-gcode",
|
|
"has_machine_quality": true,
|
|
"has_materials": true,
|
|
"has_variants": true,
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "atmat_signal_pro_extruder_left",
|
|
"1": "atmat_signal_pro_extruder_right"
|
|
},
|
|
"preferred_material": "generic_pla_175",
|
|
"preferred_quality_type": "fast",
|
|
"preferred_variant_name": "V6 0.40mm",
|
|
"supports_network_connection": false,
|
|
"supports_usb_connection": false,
|
|
"variants_name": "Nozzle"
|
|
},
|
|
"overrides":
|
|
{
|
|
"acceleration_enabled": { "value": "True" },
|
|
"acceleration_layer_0": { "value": "250" },
|
|
"acceleration_prime_tower": { "value": "1000" },
|
|
"acceleration_print": { "value": "1000" },
|
|
"acceleration_support": { "value": "1000" },
|
|
"acceleration_support_interface": { "value": "750" },
|
|
"acceleration_topbottom": { "value": "750" },
|
|
"acceleration_travel": { "value": "1000" },
|
|
"acceleration_wall": { "value": "750" },
|
|
"acceleration_wall_0": { "value": "500" },
|
|
"adhesion_type": { "default_value": "skirt" },
|
|
"alternate_extra_perimeter": { "value": "True" },
|
|
"bridge_fan_speed": { "value": "100" },
|
|
"bridge_fan_speed_2": { "resolve": "max(cool_fan_speed, 50)" },
|
|
"bridge_fan_speed_3": { "resolve": "max(cool_fan_speed, 20)" },
|
|
"bridge_settings_enabled": { "value": "True" },
|
|
"bridge_wall_coast": { "value": "10" },
|
|
"build_volume_temperature": { "maximum_value_warning": 45 },
|
|
"cool_fan_full_at_height": { "value": "resolveOrValue('layer_height_0') + resolveOrValue('layer_height') * max(1, cool_fan_full_layer - 1)" },
|
|
"cool_fan_full_layer": { "value": "4" },
|
|
"cool_fan_speed_min": { "value": "cool_fan_speed" },
|
|
"cool_min_layer_time": { "value": "15" },
|
|
"cool_min_layer_time_fan_speed_max": { "value": "20" },
|
|
"extruder_prime_pos_abs": { "value": "True" },
|
|
"fill_outline_gaps": { "value": "True" },
|
|
"gantry_height": { "value": 30 },
|
|
"infill_before_walls": { "value": "False" },
|
|
"infill_enable_travel_optimization": { "value": "True" },
|
|
"jerk_enabled": { "value": "True" },
|
|
"jerk_layer_0": { "value": "5" },
|
|
"jerk_prime_tower": { "value": "jerk_print" },
|
|
"jerk_print": { "value": "10" },
|
|
"jerk_support": { "value": "jerk_print" },
|
|
"jerk_support_interface": { "value": "jerk_print" },
|
|
"jerk_topbottom": { "value": "jerk_print" },
|
|
"jerk_travel": { "value": "jerk_layer_0" },
|
|
"jerk_travel_layer_0": { "value": "jerk_layer_0" },
|
|
"jerk_wall": { "value": "jerk_print" },
|
|
"jerk_wall_0": { "value": "jerk_print" },
|
|
"layer_height_0": { "resolve": "max(0.2, min(extruderValues('layer_height')))" },
|
|
"line_width": { "value": "machine_nozzle_size * 1.125" },
|
|
"machine_acceleration": { "default_value": 1500 },
|
|
"machine_depth": { "default_value": 300 },
|
|
"machine_end_gcode": { "default_value": "M104 T0 S0 ;extruder heater off\nM104 T1 S0 ;extruder heater off\nM140 S0 ;heated bed heater off\nG91\nG1 Z1 F420 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 E-1 F300 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG1 X0 Y300 F6000 ;move the head out of the way\nM84 ;steppers off" },
|
|
"machine_extruder_count": { "default_value": 2 },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[-35, 65],
|
|
[-35, -50],
|
|
[35, -50],
|
|
[35, 65]
|
|
]
|
|
},
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_heated_build_volume": { "default_value": true },
|
|
"machine_height": { "default_value": 300 },
|
|
"machine_max_acceleration_x": { "default_value": 1500 },
|
|
"machine_max_acceleration_y": { "default_value": 1500 },
|
|
"machine_max_acceleration_z": { "default_value": 250 },
|
|
"machine_max_feedrate_e": { "default_value": 120 },
|
|
"machine_max_feedrate_z": { "default_value": 10 },
|
|
"machine_max_jerk_e": { "default_value": 15 },
|
|
"machine_max_jerk_xy": { "default_value": 15 },
|
|
"machine_max_jerk_z": { "default_value": 1 },
|
|
"machine_name": { "default_value": "Signal Pro" },
|
|
"machine_start_gcode": { "default_value": "G21 ; set units to millimeters\nG90 ; use absolute positioning\nM82 ; absolute extrusion mode\nG28 ; home all without mesh bed level\nM420 S1\nG92 E0.0 ; reset extruder distance position\nG1 Z0.25\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E21.5 F1000.0 ; intro line\nG92 E0.0 ; reset extruder distance position" },
|
|
"machine_width": { "default_value": 300 },
|
|
"material_bed_temperature": { "maximum_value_warning": 140 },
|
|
"material_print_temperature": { "maximum_value_warning": 295 },
|
|
"meshfix_maximum_deviation": { "value": "layer_height / 2" },
|
|
"meshfix_maximum_resolution": { "value": "0.01" },
|
|
"min_infill_area": { "value": "5.0" },
|
|
"minimum_polygon_circumference": { "value": "0.2" },
|
|
"optimize_wall_printing_order": { "value": "True" },
|
|
"prime_tower_enable": { "value": "True" },
|
|
"prime_tower_position_x": { "value": "270" },
|
|
"prime_tower_position_y": { "value": "270" },
|
|
"retraction_amount": { "value": "1" },
|
|
"retraction_combing": { "value": "'noskin'" },
|
|
"retraction_combing_max_distance": { "value": "10" },
|
|
"retraction_hop": { "value": "0.5" },
|
|
"retraction_hop_enabled": { "value": "True" },
|
|
"retraction_prime_speed":
|
|
{
|
|
"maximum_value_warning": "130",
|
|
"value": "math.ceil(retraction_speed * 0.4)"
|
|
},
|
|
"retraction_retract_speed":
|
|
{
|
|
"maximum_value_warning": "130",
|
|
"value": "retraction_speed"
|
|
},
|
|
"retraction_speed":
|
|
{
|
|
"maximum_value_warning": "130",
|
|
"value": "50"
|
|
},
|
|
"roofing_layer_count": { "value": "1" },
|
|
"skirt_brim_minimal_length": { "value": "550" },
|
|
"speed_layer_0": { "value": "math.ceil(speed_print * 0.25)" },
|
|
"speed_roofing": { "value": "math.ceil(speed_print * 0.45)" },
|
|
"speed_slowdown_layers": { "value": "2" },
|
|
"speed_topbottom": { "value": "math.ceil(speed_print * 0.45)" },
|
|
"speed_travel":
|
|
{
|
|
"maximum_value": "150",
|
|
"maximum_value_warning": "151",
|
|
"value": "150"
|
|
},
|
|
"speed_travel_layer_0": { "value": "math.ceil(speed_travel * 0.4)" },
|
|
"speed_wall": { "value": "math.ceil(speed_print * 0.50)" },
|
|
"speed_wall_0": { "value": "math.ceil(speed_print * 0.50)" },
|
|
"speed_wall_x": { "value": "math.ceil(speed_print * 0.75)" },
|
|
"support_angle": { "value": "60" },
|
|
"support_bottom_distance": { "value": "support_z_distance / 2" },
|
|
"support_bottom_enable": { "value": "False" },
|
|
"support_brim_enable": { "value": "True" },
|
|
"support_infill_rate": { "value": "20" },
|
|
"support_interface_enable": { "value": "True" },
|
|
"support_interface_height": { "value": "1" },
|
|
"support_interface_skip_height": { "value": "layer_height" },
|
|
"support_join_distance": { "value": "1" },
|
|
"support_offset": { "value": "1.5" },
|
|
"support_pattern": { "default_value": "zigzag" },
|
|
"support_top_distance": { "value": "support_z_distance" },
|
|
"support_xy_distance": { "value": "wall_line_width_0 * 2.5" },
|
|
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
|
"support_z_distance": { "value": "layer_height" },
|
|
"switch_extruder_prime_speed": { "value": "15" },
|
|
"switch_extruder_retraction_amount": { "value": "2" },
|
|
"travel_avoid_other_parts": { "value": "True" },
|
|
"travel_avoid_supports": { "value": "True" },
|
|
"wall_line_width": { "value": "machine_nozzle_size" },
|
|
"wall_overhang_angle": { "value": "75" },
|
|
"wall_overhang_speed_factor": { "value": "50" },
|
|
"zig_zaggify_infill": { "value": "True" }
|
|
}
|
|
} |