mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-07 05:53:59 -06:00
000d7e90f5
These formulas were using a setting that didn't exist any more. Not sure how this got through QA. Oh well, this is what they are intending. This formula is a little bit weird in how it works with support meshes if support is disabled, but it's more or less as good as it gets. The formula is mirrored from how other Ultimaker printers write it down, but slightly simplified with the same outcome.
45 lines
1.1 KiB
INI
45 lines
1.1 KiB
INI
[general]
|
|
version = 4
|
|
name = Fast
|
|
definition = ultimaker2_plus_connect
|
|
|
|
[metadata]
|
|
setting_version = 16
|
|
type = quality
|
|
quality_type = slightlycoarse
|
|
weight = -2
|
|
material = generic_nylon
|
|
variant = 0.8 mm
|
|
|
|
[values]
|
|
brim_line_count = 8
|
|
cool_fan_speed_min = =cool_fan_speed * 0.35
|
|
cool_min_speed = 15
|
|
infill_overlap = 5
|
|
infill_sparse_density = 20
|
|
layer_0_z_overlap = 0.25
|
|
raft_airgap = 0.44
|
|
raft_base_line_width = 1.6
|
|
raft_interface_line_spacing = 1.8
|
|
raft_interface_line_width = 1.6
|
|
raft_margin = 15
|
|
raft_surface_line_width = 0.7
|
|
raft_surface_thickness = 0.2
|
|
retraction_hop_enabled = 0.2
|
|
speed_layer_0 = =math.ceil(speed_print * 30 / 55)
|
|
speed_print = 55
|
|
speed_support = 40
|
|
speed_topbottom = =math.ceil(speed_print * 35 / 55)
|
|
speed_travel = 150
|
|
speed_wall_0 = =math.ceil(speed_print * 15 / 55)
|
|
speed_wall_x = =math.ceil(speed_print * 40 / 55)
|
|
support_angle = 45
|
|
support_bottom_distance = 0.65
|
|
support_enable = True
|
|
support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
|
|
support_pattern = lines
|
|
support_top_distance = 0.5
|
|
support_xy_distance = 0.75
|
|
support_z_distance = =layer_height * 2
|
|
top_bottom_thickness = 1.2
|
|
wall_thickness = 2.4
|