mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-07-24 23:23:57 -06:00
0505b16ffb
- Add a new field "variant" in "metadata" section for quality profiles. "material" will only contain values such as "generic_abs", and "variant" will contain values such as "0.25 mm", "AA 0.4", etc. - Reformat "metadata" section to have the following order: - setting_version - type - quality_type - weight - global_quality - material - variant
37 lines
1.2 KiB
INI
37 lines
1.2 KiB
INI
[general]
|
|
version = 2
|
|
name = Normal
|
|
definition = ultimaker3
|
|
|
|
[metadata]
|
|
setting_version = 4
|
|
type = quality
|
|
quality_type = fast
|
|
weight = -1
|
|
material = generic_bam
|
|
variant = AA 0.4
|
|
|
|
[values]
|
|
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
|
|
cool_fan_speed_max = =cool_fan_speed
|
|
machine_nozzle_cool_down_speed = 0.75
|
|
machine_nozzle_heat_up_speed = 1.6
|
|
# prime_tower_enable: see CURA-4248
|
|
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
|
|
speed_print = 80
|
|
speed_layer_0 = 20
|
|
speed_topbottom = =math.ceil(speed_print * 30 / 80)
|
|
speed_wall = =math.ceil(speed_print * 40 / 80)
|
|
speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
|
|
top_bottom_thickness = 1
|
|
wall_thickness = 1
|
|
support_interface_enable = True
|
|
support_interface_density = =min(extruderValues('material_surface_energy'))
|
|
support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
|
|
support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
|
|
support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
|
|
support_angle = 45
|
|
support_join_distance = 5
|
|
support_offset = 2
|
|
support_pattern = triangles
|
|
support_infill_rate = 10
|