3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2026-02-17 18:02:16 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 6
Cura/resources/variants
History
Paul Kuiper bb28aaf137 [PP-625] 
Adhesion reliability
- Maximum first layer speed is 50mm/s to improve adhesion reliability and bottom layer quality for all materials

PVA adhesion
 Use the PVA and BAM build plate and volume temperature when they are used as support material. The combi PLA/PVA will now have a 60C build plate temp. iso 55C to improve PVA adhesion.
Note: Adding an outer brim did not seem to help much, so did not add it

Holes in walls PETG
- Unretract speed from 45mm/s to 15mm/s to reduce bubbles in the walls

Print quality PC and CPE+
- Reduce retract length to prevent air capture during unretracts
- Inner wall before outer wall to place any gas bubbles in the inner wall for PC
- Inner wall speed equal to outer wall speed to prevent flow jumps for PC
- Lowered the flow rate to 95% for PC to prevent over extrusion and pressure build up
- Enable alternating wall to reduce warping stress
- 10C higher nozzle temperature (PC:290C, CPE+: 280C) to remelt the line below
    -  Keep initial and final temperature the same to prevent oozing
- 5C higher bed temperature (PC:115C, CPE+: 115C) to increase bed adhesion
- Chamber temperature to 50C (max. value S line)
- Enable a brim to reduce warping

Dimensional accuracy
- Increase xy_offset from -0.02 to +0.05mm to compensate

Prevent prime tower breaking
- Reduce prime tower speed to 50mm/s
- Reduce prime tower jerk to 2000mm/s3
- Increased minimum purge volume from 10 to 20mm3 for PVA (not for the other materials did not seem to work for them)
- Lower PVA initial and final temperatures to 215 and 210 resp.

Oozing during nozzle switches
- Set enable cool_during_extruder_switch to “all fans”
- Lower PVA initial and final temperatures to 215 and 210 resp.

Tree support improvements
- Decrease max. branch angle from 60 to 50 to prevent branches to overhang too much. Set preferred to 35 degree
- Increase Branch diameter from 5 to 8mm to get sturdier branches

Better thin wall structures
Increase the wall and skin thickness from 3 to 4 line widths for the Engineering intent to improve the print quality of thin walled injection molded like models.

Removing AA+0.6 core for the S line machines
2025-05-07 11:19:43 +02:00
..
arjun Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
artillery Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
atmat Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
biqu Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
blocks Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
cartesio Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
crazy3dprint Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
creality Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
dagoma Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
deltacomb Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
diy Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
draftshift Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
dxu Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
elegoo Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
fabtotum Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
farm2 Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
felix Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
flashforge Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
flyingbear Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
fusion3 Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
geeetech_variants Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
gmax Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
goofoo Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
hms434 Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
imade3d Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
kingroon Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
kosher Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
leapfrog Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
liquid Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
lnl3d Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
longer Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
mark2 Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
mingda Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
modix Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
multicomp Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
nwa3d Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ratrig Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
renkforce Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
sovol Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
strateo3d Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
structur3d Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
tizyx Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
tronxy Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
two_trees Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
uni Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
vivedino Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
voron Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
vzbot Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
weedo Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
xyz_printing Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
zav Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
zyyx Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_olsson_0.4.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_olsson_0.6.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_olsson_0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_olsson_0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_plus_0.4.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_plus_0.6.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_plus_0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_plus_0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_olsson_0.4.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_olsson_0.6.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_olsson_0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_olsson_0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_0.4.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_0.6.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_connect_0.4.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_connect_0.6.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_connect_0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_connect_0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_aa0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_aa0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_aa04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_bb0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_bb04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_extended_aa0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_extended_aa0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_extended_aa04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_extended_bb0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_extended_bb04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_aa0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_aa0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_aa04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_bb0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_bb04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_cc04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_cc06.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_dd04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_ht06.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_method_1A.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_method_1C.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_method_2A.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_method_LABS.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodx_1A.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodx_1C.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodx_1XA.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodx_2A.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodx_2XA.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodx_LABS.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodxl_1A.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodxl_1C.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodxl_1XA.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodxl_2A.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodxl_2XA.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodxl_LABS.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_replicator_smart_extruder_plus.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_replicator_smart_extruder_plus_im-pla.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_replicator_smart_extruder_plus_labs.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s3_aa0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s3_aa0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s3_aa04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s3_bb0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s3_bb04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s3_cc04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s3_cc06.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s3_dd04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_aa0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_aa0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_aa04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_aluminum.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_bb0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_bb04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_cc04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_cc06.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_dd04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_glass.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s6_aa_plus04.inst.cfg New configurations for the S line printers. 2025-04-04 12:02:58 +02:00
ultimaker_s6_bb04.inst.cfg New configurations for the S line printers. 2025-04-04 12:02:58 +02:00
ultimaker_s6_cc_plus04.inst.cfg New configurations for the S line printers. 2025-04-04 12:02:58 +02:00
ultimaker_s6_cc_plus06.inst.cfg Add new configuration files for AA+ and CC+ 0.6 nozzles 2025-04-08 15:44:20 +02:00
ultimaker_s6_dd04.inst.cfg New configurations for the S line printers. 2025-04-04 12:02:58 +02:00
ultimaker_s7_aa0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s7_aa0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s7_aa04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s7_bb0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s7_bb04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s7_cc04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s7_cc06.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s7_dd04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s8_aa_plus04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s8_bb04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s8_cc_plus04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s8_cc_plus06.inst.cfg New configurations for the S line printers. 2025-04-04 12:02:58 +02:00
ultimaker_s8_dd04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_sketch_0.4mm.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_sketch_large_0.4mm.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_sketch_sprint_0.4mm.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00