mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-09 14:55:03 -06:00
2c331604e8
These were errors that were copy pasted from other definitions. So leaving them as is would continue to decrease the quality of third party profiles.
56 lines
2.6 KiB
JSON
56 lines
2.6 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "HCTECH_HC300-M3",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "HCTECH",
|
|
"manufacturer": "HCTECH",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "hctech_hc300-m3.3mf",
|
|
"has_machine_quality": false,
|
|
"machine_extruder_trains": {
|
|
"0": "hctech_hc300-m3_extruder_0"
|
|
}
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_head_with_fans_polygon":
|
|
{ "default_value": [
|
|
[-49, 36],
|
|
[-36, -29],
|
|
[36, -29],
|
|
[36, 49]
|
|
]
|
|
},
|
|
"machine_name": { "default_value": "HCTECH HC300-M3" },
|
|
"machine_extruder_count": { "default_value": 1 },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_width": { "default_value": 300 },
|
|
"machine_depth": { "default_value": 300 },
|
|
"machine_height": { "default_value": 300 },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"retraction_amount": {
|
|
"default_value": 3,
|
|
"maximum_value_warning": 8
|
|
},
|
|
"adhesion_type": { "default_value": "skirt" },
|
|
"retraction_speed": { "default_value": 35},
|
|
"travel_avoid_supports": { "value": true },
|
|
"travel_retract_before_outer_wall": { "value": true },
|
|
|
|
"gantry_height": { "value": "55" },
|
|
"speed_print": { "default_value": 60.0 } ,
|
|
|
|
"material_diameter": { "default_value": 1.75 },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_start_gcode": { "default_value": "G28 X Y ;Home XY\nG92 E0 ;Reset Extruder\nG1 E-1 F2400 ;Retract\nG92 E0 ;Reset Extruder\nG28 Z ;home Z\nG29 ; Measure the bed\nM500 ; Store to EEPROM\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.36 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.36 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.36 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.36 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder" },
|
|
"machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 Z1 E-2 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG1 X5 Y290 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z" },
|
|
|
|
"cool_fan_speed": { "value": 75 },
|
|
|
|
"line_width": { "value": 0.38 },
|
|
"travel_avoid_distance": { "value": 1 },
|
|
"infill_before_walls": { "value": false }
|
|
}
|
|
}
|