mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-07 22:13:58 -06:00
1dc39dba71
To reduce the number of overrides. You'd only need to change it in one place, next time. It was being overridden in the quality profile in every supported configuration.
77 lines
No EOL
2.3 KiB
INI
77 lines
No EOL
2.3 KiB
INI
[general]
|
|
version = 4
|
|
name = Medium
|
|
definition = imade3d_jellybox
|
|
|
|
[metadata]
|
|
setting_version = 11
|
|
type = quality
|
|
quality_type = normal
|
|
weight = 0
|
|
global_quality = True
|
|
|
|
[values]
|
|
adhesion_type = skirt
|
|
layer_height = 0.2
|
|
layer_height_0 = 0.3
|
|
retraction_hop = 0.2
|
|
bottom_thickness = =top_bottom_thickness
|
|
coasting_enable = True
|
|
coasting_min_volume = 2
|
|
coasting_volume = 0.032
|
|
cool_fan_speed_max = =cool_fan_speed
|
|
infill_before_walls = False
|
|
infill_line_width = =round(line_width * 1.5, 2)
|
|
infill_pattern = zigzag
|
|
infill_sparse_density = 25
|
|
line_width = =machine_nozzle_size
|
|
material_bed_temperature = =default_material_bed_temperature
|
|
material_bed_temperature_layer_0 = =material_bed_temperature + 5
|
|
material_print_temperature = =default_material_print_temperature
|
|
material_print_temperature_layer_0 = =material_print_temperature + 5
|
|
print_sequence = all_at_once
|
|
retract_at_layer_change = True
|
|
retraction_combing = noskin
|
|
retraction_hop_enabled = True
|
|
retraction_min_travel = =machine_nozzle_size * 3
|
|
retraction_retract_speed = =retraction_speed
|
|
roofing_layer_count = 1
|
|
skin_line_width = =line_width * 1.2
|
|
skin_outline_count = 2
|
|
skirt_brim_minimal_length = 100
|
|
skirt_brim_speed = =speed_layer_0
|
|
skirt_gap = 5
|
|
skirt_line_count = 1
|
|
speed_layer_0 = 20
|
|
speed_roofing = 20
|
|
speed_topbottom = 25
|
|
speed_travel = =speed_print if magic_spiralize else 120
|
|
speed_travel_layer_0 = 60
|
|
support_angle = 60
|
|
support_bottom_enable = False
|
|
support_bottom_height = 0
|
|
support_connect_zigzags = False
|
|
support_enable = False
|
|
support_infill_rate = 20
|
|
support_interface_density = 70
|
|
support_interface_enable = True
|
|
support_interface_height = 2
|
|
support_interface_pattern = concentric
|
|
support_interface_skip_height = 0.1
|
|
support_type = everywhere
|
|
support_use_towers = False
|
|
support_xy_distance = 0.8
|
|
support_xy_distance_overhang = =machine_nozzle_size / 2
|
|
support_z_distance = 0.2
|
|
travel_compensate_overlapping_walls_0_enabled = =travel_compensate_overlapping_walls_enabled
|
|
travel_compensate_overlapping_walls_x_enabled = =travel_compensate_overlapping_walls_enabled
|
|
travel_retract_before_outer_wall = True
|
|
wall_0_wipe_dist = =round(line_width * 1.2,1)
|
|
bridge_settings_enabled = True
|
|
bridge_enable_more_layers = False
|
|
bridge_skin_material_flow = 85
|
|
bridge_skin_speed = 20
|
|
bridge_wall_material_flow = 85
|
|
bridge_wall_speed = 20
|
|
infill_enable_travel_optimization = True
|
|
retraction_combing_max_distance = 50 |