mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-08 14:34:01 -06:00
907d064684
They share the same profiles. They should also have the same settings in the variants, but this is not automatically shared for some reason. Contributes to issue CURA-3650.
77 lines
2.2 KiB
INI
77 lines
2.2 KiB
INI
[general]
|
|
name = BB 0.8
|
|
version = 2
|
|
definition = ultimaker3_extended
|
|
|
|
[metadata]
|
|
author = ultimaker
|
|
type = variant
|
|
|
|
[values]
|
|
acceleration_enabled = True
|
|
acceleration_print = 4000
|
|
acceleration_support_interface = =math.ceil(acceleration_topbottom * 100 / 500)
|
|
brim_width = 3
|
|
cool_fan_speed = 50
|
|
cool_min_speed = 5
|
|
infill_line_width = =round(line_width * 0.8 / 0.7, 2)
|
|
infill_overlap = 0
|
|
infill_pattern = triangles
|
|
infill_wipe_dist = 0
|
|
jerk_enabled = True
|
|
jerk_print = 25
|
|
jerk_support_interface = =math.ceil(jerk_topbottom * 1 / 5)
|
|
layer_height = 0.2
|
|
machine_min_cool_heat_time_window = 15
|
|
machine_nozzle_heat_up_speed = 1.5
|
|
machine_nozzle_size = 0.8
|
|
material_print_temperature = =default_material_print_temperature + 10
|
|
material_standby_temperature = 100
|
|
multiple_mesh_overlap = 0
|
|
prime_tower_enable = False
|
|
prime_tower_wipe_enabled = True
|
|
raft_acceleration = =acceleration_layer_0
|
|
raft_airgap = 0
|
|
raft_base_speed = 20
|
|
raft_base_thickness = 0.3
|
|
raft_interface_line_spacing = 0.5
|
|
raft_interface_line_width = 0.5
|
|
raft_interface_speed = 20
|
|
raft_interface_thickness = 0.2
|
|
raft_margin = 10
|
|
raft_speed = 25
|
|
raft_surface_layers = 1
|
|
retraction_amount = 4.5
|
|
retraction_count_max = 15
|
|
retraction_extrusion_window = =retraction_amount
|
|
retraction_hop = 2
|
|
retraction_hop_enabled = True
|
|
retraction_hop_only_when_collides = True
|
|
retraction_min_travel = 5
|
|
retraction_prime_speed = 15
|
|
skin_overlap = 5
|
|
speed_layer_0 = 20
|
|
speed_print = 35
|
|
speed_support_interface = =math.ceil(speed_topbottom * 15 / 20)
|
|
speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
|
|
support_angle = 60
|
|
support_bottom_height = =layer_height * 2
|
|
support_bottom_stair_step_height = =layer_height
|
|
support_infill_rate = 25
|
|
support_interface_enable = True
|
|
support_interface_height = =layer_height * 5
|
|
support_join_distance = 3
|
|
support_line_width = =round(line_width * 0.4 / 0.35, 2)
|
|
support_offset = 1.5
|
|
support_pattern = triangles
|
|
support_use_towers = False
|
|
support_xy_distance = =wall_line_width_0 / 2
|
|
support_xy_distance_overhang = =wall_line_width_0 / 4
|
|
support_z_distance = 0
|
|
switch_extruder_prime_speed = 15
|
|
switch_extruder_retraction_amount = 12
|
|
top_bottom_thickness = 1
|
|
travel_avoid_distance = 3
|
|
wall_0_inset = 0
|
|
wall_line_width_x = =wall_line_width
|
|
wall_thickness = 1
|