mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-07-25 15:44:04 -06:00
39 lines
No EOL
3.1 KiB
JSON
39 lines
No EOL
3.1 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Biqu B2",
|
|
"inherits": "biqu_b1",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "Boris Juraga",
|
|
"has_textured_buildplate": true,
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "biqu_b2_extruder_0",
|
|
"1": "biqu_b2_extruder_1"
|
|
},
|
|
"quality_definition": "biqu_b2"
|
|
},
|
|
"overrides":
|
|
{
|
|
"gantry_height": { "value": 27.5 },
|
|
"machine_end_gcode": { "default_value": ";BEGIN OF CUSTOM END GCODE\nM104 S0\nM140 S0\n;Retract the filament\nG91\nG1 E-30 F300\nG1 Z5\nG90\nG28 X0 Y{machine_depth}\n;END OF CUSTOM END GCODE" },
|
|
"machine_extruder_count": { "default_value": 2 },
|
|
"machine_extruders_share_heater": { "default_value": true },
|
|
"machine_extruders_share_nozzle": { "default_value": true },
|
|
"machine_extruders_shared_nozzle_initial_retraction": { "default_value": 30 },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[-33, 35],
|
|
[-33, -23],
|
|
[33, -23],
|
|
[33, 35]
|
|
]
|
|
},
|
|
"machine_name": { "default_value": "BIQU B2" },
|
|
"machine_start_gcode": { "default_value": ";BEGIN OF CUSTOM START GCODE\nG28 ;Home\nG1 Z15.0 F6000 ;Move the platform down 15mm\n;Prime the extruder\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\nT0\nG92 E0\nG1 F1200 E-30\nG92 E0\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\nT1\nG92 E0\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X6.1 Y20 Z0.3 F5000.0 ; Move to start position\nM117 Purging\nG1 X6.1 Y200.0 Z0.3 F1500.0 E10 ; Draw the first line\nG1 X6.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X6.4 Y20 Z0.3 F1500.0 E20 ; Draw the second line\nG1 X6.7 Y20 Z0.3 F5000.0 ; Move to side a little\nG1 X6.7 Y200.0 Z0.3 F1500.0 E30 ; Draw the three line\nG1 X7.0 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X7.0 Y20 Z0.3 F1500.0 E40 ; Draw the four line\nG1 X7.3 Y20 Z0.3 F5000.0 ; Move to side a little\nG1 X7.3 Y200.0 Z0.3 F1500.0 E50 ; Draw the four line\nG92 E0 \nT1\nG92 E0\nG1 F1200 E-30\nG92 E0\nT0\nG92 E0\nG1 F1200 E30\nG92 E0\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X9.1 Y20 Z0.3 F5000.0 ; Move to start position\nM117 Purging\nG1 X9.1 Y200.0 Z0.3 F1500.0 E10 ; Draw the first line\nG1 X9.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X9.4 Y20 Z0.3 F1500.0 E20 ; Draw the second line\nG1 X9.7 Y20 Z0.3 F5000.0 ; Move to side a little\nG1 X9.7 Y200.0 Z0.3 F1500.0 E30 ; Draw the three line\nG1 X10.0 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X10.0 Y20 Z0.3 F1500.0 E40 ; Draw the four line\nG1 X10.3 Y20 Z0.3 F5000.0 ; Move to side a little\nG1 X10.3 Y200.0 Z0.3 F1500.0 E50 ; Draw the four line\nT0\nG92 E0\nG1 F1200 E-30\nG92 E0\nG92 E0\nT{initial_extruder_nr} ; RESET EXTRUDER TO INITIAL\n; start print\n;END OF CUSTOM START GCODE" },
|
|
"prime_tower_enable": { "default_value": true },
|
|
"prime_tower_mode": { "default_value": "interleaved" }
|
|
}
|
|
} |