mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-06 21:44:01 -06:00
d9d90ab4b6
We've removed a bunch of settings and transformed others. To allow profiles to be checked for these and edited if necessary, we now need to increment this version number. Contributes to issue CURA-8466.
45 lines
1.2 KiB
INI
45 lines
1.2 KiB
INI
[general]
|
|
version = 4
|
|
name = Fine
|
|
definition = ultimaker2_plus
|
|
|
|
[metadata]
|
|
setting_version = 20
|
|
type = quality
|
|
quality_type = draft
|
|
weight = 0
|
|
material = generic_cpe_plus
|
|
variant = 0.6 mm
|
|
|
|
[values]
|
|
adhesion_type = raft
|
|
cool_fan_speed = 45
|
|
cool_fan_speed_min = =cool_fan_speed * 25 / 45
|
|
cool_min_layer_time = 3
|
|
cool_min_speed = 8
|
|
infill_overlap = =0 if infill_sparse_density > 80 else 5
|
|
infill_sparse_density = 35
|
|
layer_0_z_overlap = 0.22
|
|
|
|
raft_airgap = 0.37
|
|
raft_base_line_spacing = 2.4
|
|
raft_base_line_width = 1.2
|
|
raft_interface_line_spacing = 1.4
|
|
raft_interface_line_width = 1.2
|
|
raft_margin = 15
|
|
raft_surface_line_width = 0.57
|
|
raft_surface_thickness = 0.2
|
|
speed_layer_0 = =math.ceil(speed_print * 30 / 35)
|
|
speed_print = 35
|
|
speed_topbottom = =math.ceil(speed_print * 20 / 35)
|
|
speed_travel = 150
|
|
speed_wall_0 = =math.ceil(speed_print * 30 / 35)
|
|
speed_wall_x = =speed_print
|
|
support_angle = 45
|
|
support_enable = True
|
|
support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
|
|
support_line_distance = 2.85
|
|
support_pattern = lines
|
|
support_xy_distance = 0.6
|
|
support_z_distance = 0.22
|
|
top_bottom_thickness = 0.75
|