mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-06 13:34:01 -06:00
2e88716f5f
If it's less, the layer doesn't get properly filled, according to the materials team. They requested that the thickness should be set to 0.225mm for just the Fine and Extra Fine profiles, but I opted for a formula that would still let it scale with the layer height up to a point.
64 lines
1.9 KiB
INI
64 lines
1.9 KiB
INI
[general]
|
|
version = 2
|
|
name = Normal
|
|
definition = ultimaker3
|
|
|
|
[metadata]
|
|
type = quality
|
|
quality_type = fast
|
|
material = generic_pc_ultimaker3_AA_0.4
|
|
weight = -1
|
|
setting_version = 1
|
|
|
|
[values]
|
|
acceleration_enabled = True
|
|
acceleration_print = 4000
|
|
adhesion_type = raft
|
|
brim_width = 20
|
|
cool_fan_full_at_height = =layer_height_0 + layer_height
|
|
cool_fan_speed_max = 85
|
|
cool_min_layer_time_fan_speed_max = 5
|
|
cool_min_speed = 7
|
|
infill_line_width = =round(line_width * 0.4 / 0.35, 2)
|
|
infill_overlap_mm = 0.05
|
|
infill_pattern = triangles
|
|
infill_wipe_dist = 0.1
|
|
jerk_enabled = True
|
|
jerk_print = 25
|
|
layer_height = 0.15
|
|
machine_min_cool_heat_time_window = 15
|
|
machine_nozzle_cool_down_speed = 0.85
|
|
machine_nozzle_heat_up_speed = 1.5
|
|
material_final_print_temperature = =material_print_temperature - 10
|
|
material_initial_print_temperature = =material_print_temperature - 5
|
|
material_print_temperature = =default_material_print_temperature + 10
|
|
material_standby_temperature = 100
|
|
multiple_mesh_overlap = 0
|
|
ooze_shield_angle = 40
|
|
prime_tower_enable = True
|
|
prime_tower_wipe_enabled = True
|
|
raft_airgap = 0.25
|
|
raft_interface_thickness = =max(layer_height * 1.5, 0.225)
|
|
retraction_count_max = 80
|
|
retraction_extrusion_window = 1
|
|
retraction_hop = 2
|
|
retraction_hop_enabled = True
|
|
retraction_hop_only_when_collides = True
|
|
retraction_min_travel = 0.8
|
|
retraction_prime_speed = 15
|
|
skin_overlap = 30
|
|
speed_layer_0 = 25
|
|
speed_print = 50
|
|
speed_topbottom = 25
|
|
speed_travel = 250
|
|
speed_wall = =math.ceil(speed_print * 40 / 50)
|
|
speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
|
|
support_bottom_distance = =support_z_distance
|
|
support_interface_density = 87.5
|
|
support_interface_pattern = lines
|
|
switch_extruder_prime_speed = 15
|
|
switch_extruder_retraction_amount = 20
|
|
switch_extruder_retraction_speeds = 35
|
|
wall_0_inset = 0
|
|
wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
|
|
wall_thickness = 1.2
|