Cura/resources/quality/tinyboy/tinyboy_e10_draft.inst.cfg
fieldOfView a79b9c4ef1 Remove material_diameter from quality profiles
Setting the `material_diameter` in a quality profile overrides what is set in the material, and there is no way for the user to override this since `material_diameter` is a hidden "machine" setting. The `material_diameter` is still properly set in the printer definition and the used material, so functionally there is no difference.

(Doesn't) affect XYZ Da Vinci, Tinyboy, Tevo Blackwidow, Nwa3d, Key3d, Kemiq Q2, Katihal, Gmax15+, Flashforge, Crazy3dPrint and AnyCubic printers.
2022-03-17 14:08:21 +01:00

60 lines
1.3 KiB
INI

[general]
version = 4
name = Draft
definition = tinyboy_e10
[metadata]
setting_version = 19
type = quality
quality_type = draft
weight = 0
global_quality = True
[values]
acceleration_enabled = True
acceleration_print = 1800
acceleration_travel = 3000
adhesion_type = skirt
brim_width = 4.0
cool_fan_full_at_height = 0.5
cool_fan_speed = 100
cool_fan_speed_0 = 100
infill_overlap = 15
infill_pattern = zigzag
infill_sparse_density = 25
initial_layer_line_width_factor = 140
jerk_enabled = True
jerk_print = 8
jerk_travel = 10
layer_height = 0.3
layer_height_0 = 0.3
material_bed_temperature = 60
material_print_temperature = 200
material_print_temperature_layer_0 = 0
retract_at_layer_change = False
retraction_amount = 6
retraction_hop = 0.075
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 1.5
retraction_speed = 40
skirt_brim_speed = 40
skirt_gap = 5
skirt_line_count = 3
speed_infill = =speed_print
speed_print = 60
speed_support = 60
speed_topbottom = =math.ceil(speed_print * 30 / 60)
speed_travel = 100
speed_wall = =speed_print
speed_wall_x = =speed_print
support_angle = 60
support_enable = True
support_interface_enable = True
support_pattern = triangles
support_roof_enable = True
support_type = everywhere
support_use_towers = False
support_xy_distance = 0.7
top_bottom_thickness = 1.2
wall_thickness = 1.2