| .. |
|
um_s3_aa0.4_ABS_Draft_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.4_ABS_Fast_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.4_ABS_High_Quality.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.4_ABS_Normal_Quality.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.4_BAM_Draft_Print.inst.cfg
|
Enable interface layer for BAM (also for PVA, but this was already enabled via the BB core variant).
|
2022-06-08 12:40:28 +02:00 |
|
um_s3_aa0.4_BAM_Fast_Print.inst.cfg
|
Enable interface layer for BAM (also for PVA, but this was already enabled via the BB core variant).
|
2022-06-08 12:40:28 +02:00 |
|
um_s3_aa0.4_BAM_Normal_Quality.inst.cfg
|
Enable interface layer for BAM (also for PVA, but this was already enabled via the BB core variant).
|
2022-06-08 12:40:28 +02:00 |
|
um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg
|
Enable interface layer for BAM (also for PVA, but this was already enabled via the BB core variant).
|
2022-06-08 12:40:28 +02:00 |
|
um_s3_aa0.4_CPE_Draft_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.4_CPE_Fast_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.4_CPE_High_Quality.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.4_CPE_Normal_Quality.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
|
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2022-06-02 17:05:57 +02:00 |
|
um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
|
remove setting, follow the default
|
2022-06-01 15:16:23 +02:00 |
|
um_s3_aa0.4_CPEP_High_Quality.inst.cfg
|
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2022-06-02 17:05:57 +02:00 |
|
um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
|
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2022-06-02 17:05:57 +02:00 |
|
um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
|
Merge branch 'master' into PP-54_decrease-resolution
|
2022-04-07 11:14:30 +02:00 |
|
um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
|
Merge branch 'master' into PP-54_decrease-resolution
|
2022-04-07 11:14:30 +02:00 |
|
um_s3_aa0.4_Nylon_High_Quality.inst.cfg
|
Merge branch 'master' into PP-54_decrease-resolution
|
2022-04-07 11:14:30 +02:00 |
|
um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
|
Merge branch 'master' into PP-54_decrease-resolution
|
2022-04-07 11:14:30 +02:00 |
|
um_s3_aa0.4_PC_Draft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.4_PC_Fast_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.4_PC_High_Quality.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.4_PC_Normal_Quality.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.4_PETG_Draft_Print.inst.cfg
|
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2022-03-31 16:32:41 +02:00 |
|
um_s3_aa0.4_PETG_Fast_Print.inst.cfg
|
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2022-03-31 16:32:41 +02:00 |
|
um_s3_aa0.4_PETG_High_Quality.inst.cfg
|
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2022-03-31 16:32:41 +02:00 |
|
um_s3_aa0.4_PETG_Normal_Quality.inst.cfg
|
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2022-03-31 16:32:41 +02:00 |
|
um_s3_aa0.4_PLA_Draft_Print.inst.cfg
|
Merge branch 'master' into PP-54_decrease-resolution
|
2022-04-07 11:14:30 +02:00 |
|
um_s3_aa0.4_PLA_Fast_Print.inst.cfg
|
Merge branch 'master' into PP-54_decrease-resolution
|
2022-04-07 11:14:30 +02:00 |
|
um_s3_aa0.4_PLA_High_Quality.inst.cfg
|
Merge branch 'master' into PP-54_decrease-resolution
|
2022-04-07 11:14:30 +02:00 |
|
um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
|
Merge branch 'master' into PP-54_decrease-resolution
|
2022-04-07 11:14:30 +02:00 |
|
um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
|
remove redundant statements
|
2022-05-30 11:03:52 +02:00 |
|
um_s3_aa0.4_PP_Draft_Print.inst.cfg
|
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2022-06-02 17:05:57 +02:00 |
|
um_s3_aa0.4_PP_Fast_Print.inst.cfg
|
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2022-06-02 17:05:57 +02:00 |
|
um_s3_aa0.4_PP_Normal_Quality.inst.cfg
|
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2022-06-02 17:05:57 +02:00 |
|
um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
|
Further cleanup of the jerk settings. UM2 based machine have no jerk settings, removed them. Set first layer jerk equal to print jerk and removed all jerk settings (except for jerk_print) in the quality and variant files.
|
2022-06-02 11:33:22 +02:00 |
|
um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
|
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2022-03-31 16:32:41 +02:00 |
|
um_s3_aa0.4_TPLA_High_Quality.inst.cfg
|
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2022-03-31 16:32:41 +02:00 |
|
um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
|
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2022-03-31 16:32:41 +02:00 |
|
um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
|
remove redundant statements
|
2022-05-30 11:03:52 +02:00 |
|
um_s3_aa0.4_TPU_Draft_Print.inst.cfg
|
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2022-06-02 17:05:57 +02:00 |
|
um_s3_aa0.4_TPU_Fast_Print.inst.cfg
|
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2022-06-02 17:05:57 +02:00 |
|
um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
|
set material specific settings
|
2022-06-01 15:18:25 +02:00 |
|
um_s3_aa0.8_ABS_Draft_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg
|
Merge branch 'PP-104_respect-maximum-flow-AA08'
|
2022-03-30 13:44:45 +02:00 |
|
um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.8_CPE_Draft_Print.inst.cfg
|
Merge branch 'master' into PP-54_decrease-resolution
|
2022-04-07 11:14:30 +02:00 |
|
um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg
|
Merge branch 'master' into PP-54_decrease-resolution
|
2022-04-07 11:14:30 +02:00 |
|
um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg
|
Merge branch 'master' into PP-54_decrease-resolution
|
2022-04-07 11:14:30 +02:00 |
|
um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
|
Merge branch 'PP-104_respect-maximum-flow-AA08'
|
2022-03-30 13:44:45 +02:00 |
|
um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
|
Cleaned up of the support settings for quality modes.
|
2022-06-03 10:29:27 +02:00 |
|
um_s3_aa0.8_PC_Fast_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.8_PC_Superdraft_Print.inst.cfg
|
Merge branch 'PP-104_respect-maximum-flow-AA08'
|
2022-03-30 13:44:45 +02:00 |
|
um_s3_aa0.8_PC_Verydraft_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.8_PETG_Draft_Print.inst.cfg
|
Merge branch 'master' into PP-54_decrease-resolution
|
2022-04-07 11:14:30 +02:00 |
|
um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
|
Merge branch 'master' into PP-54_decrease-resolution
|
2022-04-07 11:14:30 +02:00 |
|
um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
|
Merge branch 'master' into PP-54_decrease-resolution
|
2022-04-07 11:14:30 +02:00 |
|
um_s3_aa0.8_PLA_Draft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.8_PP_Draft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.8_TPLA_Draft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.8_TPU_Draft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.25_ABS_Normal_Quality.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.25_CPE_Normal_Quality.inst.cfg
|
remove setting, follow the default
|
2022-06-01 15:16:23 +02:00 |
|
um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_aa0.25_PC_Normal_Quality.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
|
remove setting, follow the default
|
2022-06-01 15:16:23 +02:00 |
|
um_s3_aa0.25_PLA_Normal_Quality.inst.cfg
|
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2022-03-31 16:32:41 +02:00 |
|
um_s3_aa0.25_PP_Normal_Quality.inst.cfg
|
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2022-06-02 17:05:57 +02:00 |
|
um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg
|
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2022-03-31 16:32:41 +02:00 |
|
um_s3_bb0.4_PVA_Draft_Print.inst.cfg
|
Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA.
|
2022-06-08 15:10:41 +02:00 |
|
um_s3_bb0.4_PVA_Fast_Print.inst.cfg
|
Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA.
|
2022-06-08 15:10:41 +02:00 |
|
um_s3_bb0.4_PVA_High_Quality.inst.cfg
|
Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA.
|
2022-06-08 15:10:41 +02:00 |
|
um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
|
Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA.
|
2022-06-08 15:10:41 +02:00 |
|
um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
|
Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA.
|
2022-06-08 15:10:41 +02:00 |
|
um_s3_bb0.8_PVA_Draft_Print.inst.cfg
|
Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA.
|
2022-06-08 15:10:41 +02:00 |
|
um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
|
Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA.
|
2022-06-08 15:10:41 +02:00 |
|
um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
|
Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA.
|
2022-06-08 15:10:41 +02:00 |
|
um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_cc0.4_PLA_Draft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_cc0.4_PLA_Fast_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_cc0.6_PLA_Draft_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_cc0.6_PLA_Fast_Print.inst.cfg
|
Cleaned up of the support settings for the S3 quality modes.
|
2022-06-03 09:36:43 +02:00 |
|
um_s3_global_Draft_Quality.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_global_Fast_Quality.inst.cfg
|
Moved support infill thickness to the global quality classes of the dual extrusion machines.
|
2022-06-07 17:09:35 +02:00 |
|
um_s3_global_High_Quality.inst.cfg
|
Moved support infill thickness to the global quality classes of the dual extrusion machines.
|
2022-06-07 17:09:35 +02:00 |
|
um_s3_global_Normal_Quality.inst.cfg
|
Moved support infill thickness to the global quality classes of the dual extrusion machines.
|
2022-06-07 17:09:35 +02:00 |
|
um_s3_global_Superdraft_Quality.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
|
um_s3_global_Verydraft_Quality.inst.cfg
|
Increment setting_version to 20
|
2022-03-29 15:03:48 +02:00 |
