Cura/resources/quality/ultimaker3
2022-06-08 15:10:41 +02:00
..
um3_aa0.4_ABS_Draft_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_ABS_Fast_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_ABS_High_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_ABS_Normal_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_BAM_Draft_Print.inst.cfg Enable interface layer for BAM (also for PVA, but this was already enabled via the BB core variant). 2022-06-08 12:40:28 +02:00
um3_aa0.4_BAM_Fast_Print.inst.cfg Enable interface layer for BAM (also for PVA, but this was already enabled via the BB core variant). 2022-06-08 12:40:28 +02:00
um3_aa0.4_BAM_Normal_Quality.inst.cfg Enable interface layer for BAM (also for PVA, but this was already enabled via the BB core variant). 2022-06-08 12:40:28 +02:00
um3_aa0.4_CPE_Draft_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_CPE_Fast_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_CPE_High_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_CPE_Normal_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_CPEP_Draft_Print.inst.cfg Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max 2022-06-02 17:05:57 +02:00
um3_aa0.4_CPEP_Fast_Print.inst.cfg Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max 2022-06-02 17:05:57 +02:00
um3_aa0.4_CPEP_High_Quality.inst.cfg Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max 2022-06-02 17:05:57 +02:00
um3_aa0.4_CPEP_Normal_Quality.inst.cfg Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max 2022-06-02 17:05:57 +02:00
um3_aa0.4_Nylon_Draft_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_Nylon_Fast_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_Nylon_High_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_Nylon_Normal_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_PC_Draft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.4_PC_Fast_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.4_PC_High_Quality.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.4_PC_Normal_Quality.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.4_PETG_Draft_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_PETG_Fast_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_PETG_Normal_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_PLA_Draft_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_PLA_Fast_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_PLA_High_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_PLA_Normal_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_PP_Draft_Print.inst.cfg set material specific settings 2022-06-01 15:18:25 +02:00
um3_aa0.4_PP_Fast_Print.inst.cfg set material specific settings 2022-06-01 15:18:25 +02:00
um3_aa0.4_PP_Normal_Quality.inst.cfg Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max 2022-06-02 17:05:57 +02:00
um3_aa0.4_TPLA_Draft_Print.inst.cfg Further cleanup of the jerk settings. UM2 based machine have no jerk settings, removed them. Set first layer jerk equal to print jerk and removed all jerk settings (except for jerk_print) in the quality and variant files. 2022-06-02 11:33:22 +02:00
um3_aa0.4_TPLA_Fast_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_TPLA_Normal_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.4_TPU_Draft_Print.inst.cfg Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max 2022-06-02 17:05:57 +02:00
um3_aa0.4_TPU_Fast_Print.inst.cfg Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max 2022-06-02 17:05:57 +02:00
um3_aa0.4_TPU_Normal_Quality.inst.cfg Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max 2022-06-02 17:05:57 +02:00
um3_aa0.8_ABS_Draft_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.8_ABS_Superdraft_Print.inst.cfg Merge branch 'PP-104_respect-maximum-flow-AA08' 2022-03-30 13:44:45 +02:00
um3_aa0.8_ABS_Verydraft_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.8_CPE_Draft_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.8_CPE_Superdraft_Print.inst.cfg Merge branch 'PP-104_respect-maximum-flow-AA08' 2022-03-30 13:44:45 +02:00
um3_aa0.8_CPE_Verydraft_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.8_CPEP_Fast_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.8_CPEP_Superdraft_Print.inst.cfg Merge branch 'PP-104_respect-maximum-flow-AA08' 2022-03-30 13:44:45 +02:00
um3_aa0.8_CPEP_Verydraft_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.8_Nylon_Draft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.8_Nylon_Superdraft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.8_Nylon_Verydraft_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.8_PC_Fast_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.8_PC_Superdraft_Print.inst.cfg Merge branch 'PP-104_respect-maximum-flow-AA08' 2022-03-30 13:44:45 +02:00
um3_aa0.8_PC_Verydraft_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.8_PETG_Draft_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.8_PETG_Superdraft_Print.inst.cfg Merge branch 'PP-104_respect-maximum-flow-AA08' 2022-03-30 13:44:45 +02:00
um3_aa0.8_PETG_Verydraft_Print.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.8_PLA_Draft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.8_PLA_Superdraft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.8_PLA_Verydraft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.8_PP_Draft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.8_PP_Superdraft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.8_PP_Verydraft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.8_TPLA_Draft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.8_TPLA_Superdraft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.8_TPLA_Verydraft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.8_TPU_Draft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.8_TPU_Superdraft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.8_TPU_Verydraft_Print.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.25_ABS_Normal_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.25_CPE_Normal_Quality.inst.cfg remove setting, follow the default 2022-06-01 15:16:23 +02:00
um3_aa0.25_Nylon_Normal_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.25_PC_Normal_Quality.inst.cfg Cleaned up of the support settings for the UM3 quality modes. 2022-06-03 10:16:28 +02:00
um3_aa0.25_PETG_Normal_Quality.inst.cfg remove setting, follow the default 2022-06-01 15:16:23 +02:00
um3_aa0.25_PLA_Normal_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_aa0.25_PP_Normal_Quality.inst.cfg set material specific settings 2022-06-01 15:18:25 +02:00
um3_aa0.25_TPLA_Normal_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_bb0.4_PVA_Draft_Print.inst.cfg Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA. 2022-06-08 15:10:41 +02:00
um3_bb0.4_PVA_Fast_Print.inst.cfg Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA. 2022-06-08 15:10:41 +02:00
um3_bb0.4_PVA_High_Quality.inst.cfg Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA. 2022-06-08 15:10:41 +02:00
um3_bb0.4_PVA_Normal_Quality.inst.cfg Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA. 2022-06-08 15:10:41 +02:00
um3_bb0.8_PVA_Draft_Print.inst.cfg Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA. 2022-06-08 15:10:41 +02:00
um3_bb0.8_PVA_Superdraft_Print.inst.cfg Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA. 2022-06-08 15:10:41 +02:00
um3_bb0.8_PVA_Verydraft_Print.inst.cfg Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA. 2022-06-08 15:10:41 +02:00
um3_global_Draft_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_global_Fast_Quality.inst.cfg Moved support infill thickness to the global quality classes of the dual extrusion machines. 2022-06-07 17:09:35 +02:00
um3_global_High_Quality.inst.cfg Moved support infill thickness to the global quality classes of the dual extrusion machines. 2022-06-07 17:09:35 +02:00
um3_global_Normal_Quality.inst.cfg Moved support infill thickness to the global quality classes of the dual extrusion machines. 2022-06-07 17:09:35 +02:00
um3_global_Superdraft_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00
um3_global_Verydraft_Quality.inst.cfg Increment setting_version to 20 2022-03-29 15:03:48 +02:00