mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-12-25 00:48:34 -07:00
711 lines
No EOL
38 KiB
Python
711 lines
No EOL
38 KiB
Python
"""
|
|
Display Filename and Layer on the LCD by Amanda de Castilho on August 28, 2018
|
|
Modified: Joshua Pope-Lewis on November 16, 2018
|
|
Display Progress on LCD by Mathias Lyngklip Kjeldgaard, Alexander Gee, Kimmo Toivanen, Inigo Martinez on July 31, 2019
|
|
Show Progress was adapted from Display Progress by Louis Wooters on January 6, 2020. His changes are included here.
|
|
---------------------------------------------------------------
|
|
DisplayNameOrProgressOnLCD.py
|
|
Cura Post-Process plugin
|
|
Combines 'Display Filename and Layer on the LCD' with 'Display Progress'
|
|
Combined and with additions by: GregValiant (Greg Foresi)
|
|
Date: September 8, 2023
|
|
Date: March 31, 2024 - Bug fix for problem with adding M118 lines if 'Remaining Time' was not checked.
|
|
NOTE: This combined post processor will make 'Display Filename and Layer on the LCD' and 'Display Progress' obsolete
|
|
Description: Display Filename and Layer options:
|
|
Status messages sent to the printer...
|
|
- Scrolling (SCROLL_LONG_FILENAMES) if enabled in Marlin and you aren't printing a small item select this option.
|
|
- Name: By default it will use the name generated by Cura (EG: TT_Test_Cube) - You may enter a custom name here
|
|
- Start Num: Choose which number you prefer for the initial layer, 0 or 1
|
|
- Max Layer: Enabling this will show how many layers are in the entire print (EG: Layer 1 of 265!)
|
|
- Add prefix 'Printing': Enabling this will add the prefix 'Printing'
|
|
- Example Line on LCD: Printing Layer 0 of 395 3DBenchy
|
|
Display Progress options:
|
|
- Display Total Layer Count
|
|
- Disply Time Remaining for the print
|
|
- Time Fudge Factor % - Divide the Actual Print Time by the Cura Estimate. Enter as a percentage and the displayed time will be adjusted.
|
|
This allows you to bring the displayed time closer to reality (Ex: Entering 87.5 would indicate an adjustment to 87.5% of the Cura estimate).
|
|
- Example line on LCD: 1/479 | ET 2h13m
|
|
- Time to Pauses changes the M117/M118 lines to countdown to the next pause as 1/479 | TP 2h36m
|
|
- 'Add M118 Line' is available with either option. M118 will bounce the message back to a remote print server through the USB connection.
|
|
- 'Add M73 Line' is used by 'Display Progress' only. There are options to incluse M73 P(percent) and M73 R(time remaining)
|
|
- Enable 'Finish-Time' Message - when enabled, takes the Print Time and calculates when the print will end. It uses the Time Fudge Factor. The user may enter a print start time.
|
|
Date: June 30, 2025 Cost of electricity added to the other print statistics in '_add_stats'.
|
|
"""
|
|
|
|
from ..Script import Script
|
|
from UM.Application import Application
|
|
from UM.Qt.Duration import DurationFormat
|
|
import time
|
|
import datetime
|
|
import math
|
|
from UM.Message import Message
|
|
|
|
class DisplayInfoOnLCD(Script):
|
|
|
|
def initialize(self) -> None:
|
|
super().initialize()
|
|
try:
|
|
if Application.getInstance().getGlobalContainerStack().getProperty("print_sequence", "value") == "all_at_once":
|
|
enable_countdown = True
|
|
self._instance.setProperty("enable_countdown", "value", enable_countdown)
|
|
except AttributeError:
|
|
# Handle cases where the global container stack or its properties are not accessible
|
|
pass
|
|
except KeyError:
|
|
# Handle cases where the "print_sequence" property is missing
|
|
pass
|
|
|
|
def getSettingDataString(self):
|
|
return """{
|
|
"name": "Display Info on LCD",
|
|
"key": "DisplayInfoOnLCD",
|
|
"metadata": {},
|
|
"version": 2,
|
|
"settings":
|
|
{
|
|
"display_option":
|
|
{
|
|
"label": "LCD display option...",
|
|
"description": "Display Filename and Layer was formerly 'Display Filename and Layer on LCD' post-processor. The message format on the LCD is 'Printing Layer 0 of 15 3D Benchy'. Display Progress is similar to the former 'Display Progress on LCD' post-processor. The display format is '1/16 | ET 2hr28m'. Display Progress includes a fudge factor for the print time estimate.",
|
|
"type": "enum",
|
|
"options": {
|
|
"display_progress": "Display Progress",
|
|
"filename_layer": "Filename and Layer"
|
|
},
|
|
"default_value": "display_progress"
|
|
},
|
|
"format_option":
|
|
{
|
|
"label": "Scroll enabled/Small layers?",
|
|
"description": "If SCROLL_LONG_FILENAMES is enabled in your firmware select this setting.",
|
|
"type": "bool",
|
|
"default_value": false,
|
|
"enabled": "display_option == 'filename_layer'"
|
|
},
|
|
"file_name":
|
|
{
|
|
"label": "Text to display:",
|
|
"description": "By default the current filename will be displayed on the LCD. Enter text here to override the filename and display something else.",
|
|
"type": "str",
|
|
"default_value": "",
|
|
"enabled": "display_option == 'filename_layer'"
|
|
},
|
|
"startNum":
|
|
{
|
|
"label": "Initial layer number:",
|
|
"description": "Choose which number you prefer for the initial layer, 0 or 1",
|
|
"type": "int",
|
|
"default_value": 1,
|
|
"minimum_value": 0,
|
|
"maximum_value": 1,
|
|
"enabled": "display_option == 'filename_layer'"
|
|
},
|
|
"maxlayer":
|
|
{
|
|
"label": "Display max layer?:",
|
|
"description": "Display how many layers are in the entire print on status bar?",
|
|
"type": "bool",
|
|
"default_value": true,
|
|
"enabled": "display_option == 'filename_layer'"
|
|
},
|
|
"addPrefixPrinting":
|
|
{
|
|
"label": "Add prefix 'Printing'?",
|
|
"description": "This will add the prefix 'Printing'",
|
|
"type": "bool",
|
|
"default_value": true,
|
|
"enabled": "display_option == 'filename_layer'"
|
|
},
|
|
"display_total_layers":
|
|
{
|
|
"label": "Display total layers",
|
|
"description": "This setting adds the 'Total Layers' to the LCD message as '17/234'.",
|
|
"type": "bool",
|
|
"default_value": true,
|
|
"enabled": "display_option == 'display_progress'"
|
|
},
|
|
"display_remaining_time":
|
|
{
|
|
"label": "Display remaining time",
|
|
"description": "This will add the remaining printing time to the LCD message.",
|
|
"type": "bool",
|
|
"default_value": true,
|
|
"enabled": "display_option == 'display_progress'"
|
|
},
|
|
"add_m117_line":
|
|
{
|
|
"label": "Add M117 Line",
|
|
"description": "M117 sends a message to the LCD screen. Some screen firmware will not accept or display messages.",
|
|
"type": "bool",
|
|
"default_value": true
|
|
},
|
|
"add_m118_line":
|
|
{
|
|
"label": "Add M118 Line",
|
|
"description": "Adds M118 in addition to the M117. It will bounce the message back through the USB port to a computer print server (if a printer server like Octoprint or Pronterface is in use).",
|
|
"type": "bool",
|
|
"default_value": true
|
|
},
|
|
"add_m118_a1":
|
|
{
|
|
"label": " Add A1 to M118 Line",
|
|
"description": "Adds A1 parameter. A1 adds a double foreslash '//' to the response. Octoprint may require this.",
|
|
"type": "bool",
|
|
"default_value": false,
|
|
"enabled": "add_m118_line"
|
|
},
|
|
"add_m118_p0":
|
|
{
|
|
"label": " Add P0 to M118 Line",
|
|
"description": "Adds P0 parameter. P0 has the printer send the response out through all it's ports. Octoprint may require this.",
|
|
"type": "bool",
|
|
"default_value": false,
|
|
"enabled": "add_m118_line"
|
|
},
|
|
"add_m73_line":
|
|
{
|
|
"label": "Add M73 Line(s)",
|
|
"description": "Adds M73 in addition to the M117. For some firmware this will set the printers time and or percentage. M75 is added to the beginning of the file and M77 is added to the end of the file. M73 will be added if one or both of the following options is chosen.",
|
|
"type": "bool",
|
|
"default_value": false,
|
|
"enabled": "display_option == 'display_progress'"
|
|
},
|
|
"add_m73_percent":
|
|
{
|
|
"label": " Add M73 Percentage",
|
|
"description": "Adds M73 with the P parameter to the start of each layer. For some firmware this will set the printers 'percentage' of layers completed and it will count upward.",
|
|
"type": "bool",
|
|
"default_value": false,
|
|
"enabled": "add_m73_line and display_option == 'display_progress'"
|
|
},
|
|
"add_m73_time":
|
|
{
|
|
"label": " Add M73 Time",
|
|
"description": "Adds M73 with the R parameter to the start of each layer. For some firmware this will set the printers 'print time' and it will count downward.",
|
|
"type": "bool",
|
|
"default_value": false,
|
|
"enabled": "add_m73_line and display_option == 'display_progress' and display_remaining_time"
|
|
},
|
|
"speed_factor":
|
|
{
|
|
"label": "Time Fudge Factor %",
|
|
"description": "When using 'Display Progress' tweak this value to get better estimates. ([Actual Print Time]/[Cura Estimate]) x 100 = Time Fudge Factor. If Cura estimated 9hr and the print actually took 10hr30min then enter 117 here to adjust any estimate closer to reality. This Fudge Factor is also used to calculate the print finish time.",
|
|
"type": "float",
|
|
"unit": "%",
|
|
"default_value": 100,
|
|
"enabled": "enable_end_message or display_option == 'display_progress'"
|
|
},
|
|
"enable_countdown":
|
|
{
|
|
"label": "Enable Countdown to Pauses",
|
|
"description": "If print sequence is 'one_at_a_time' this is false. This setting is always hidden.",
|
|
"type": "bool",
|
|
"value": false,
|
|
"enabled": false
|
|
},
|
|
"countdown_to_pause":
|
|
{
|
|
"label": "Countdown to Pauses",
|
|
"description": "This must run AFTER any script that adds a pause. Instead of the remaining print time the LCD will show the estimated time to the next layer that has a pause (TP). Countdown to Pause is not available when in One-at-a-Time' mode.",
|
|
"type": "bool",
|
|
"default_value": false,
|
|
"enabled": "display_option == 'display_progress' and enable_countdown and display_remaining_time"
|
|
},
|
|
"pause_cmd":
|
|
{
|
|
"label": " What pause command(s) are used?",
|
|
"description": "This might be M0, or M25 or M600 if Filament Change is used. If you have mixed commands then delimit them with a comma ',' (Ex: M0,M600). Spaces are not allowed.",
|
|
"type": "str",
|
|
"default_value": "M0",
|
|
"enabled": "display_option == 'display_progress' and countdown_to_pause and enable_countdown and display_remaining_time"
|
|
},
|
|
"enable_end_message":
|
|
{
|
|
"label": "Enable 'Finish-Time' Message",
|
|
"description": "Get a message when you save a fresh slice. It will show the estimated date and time that the print would finish.",
|
|
"type": "bool",
|
|
"default_value": true,
|
|
"enabled": true
|
|
},
|
|
"print_start_time":
|
|
{
|
|
"label": "Print Start Time (Ex 16:45)",
|
|
"description": "Use 'Military' time. 16:45 would be 4:45PM. 09:30 would be 9:30AM. If you leave this blank it will be assumed that the print will start Now. If you enter a guesstimate of your printer start time and that time is before 'Now' then the guesstimate will consider that the print will start tomorrow at the entered time. ",
|
|
"type": "str",
|
|
"default_value": "",
|
|
"unit": "hrs ",
|
|
"enabled": "enable_end_message"
|
|
},
|
|
"electricity_cost":
|
|
{
|
|
"label": "Electricity Cost per kWh",
|
|
"description": "Cost of electricity per kilowatt-hour. This should be on your electric utility bill.",
|
|
"type": "float",
|
|
"default_value": 0.151,
|
|
"minimum_value": 0,
|
|
"unit": "€/kWh "
|
|
},
|
|
"printer_power_usage":
|
|
{
|
|
"label": "Printer Power Usage",
|
|
"description": "Average power usage of the 3D printer in Watts. The actual wattage has many variables. 50% of the power supply rating would be a ballpark figure.",
|
|
"type": "float",
|
|
"default_value": 175,
|
|
"minimum_value": 0,
|
|
"unit": "Watts "
|
|
}
|
|
|
|
}
|
|
}"""
|
|
|
|
def execute(self, data):
|
|
display_option = self.getSettingValueByKey("display_option")
|
|
self.add_m117_line = self.getSettingValueByKey("add_m117_line")
|
|
self.add_m118_line = self.getSettingValueByKey("add_m118_line")
|
|
self.add_m118_a1 = self.getSettingValueByKey("add_m118_a1")
|
|
self.add_m118_p0 = self.getSettingValueByKey("add_m118_p0")
|
|
self.m118_text = "M118 "
|
|
self.add_m73_line = self.getSettingValueByKey("add_m73_line")
|
|
self.add_m73_time = self.getSettingValueByKey("add_m73_time")
|
|
self.add_m73_percent = self.getSettingValueByKey("add_m73_percent")
|
|
self.m73_str = ""
|
|
para_1 = data[0].split("\n")
|
|
for line in para_1:
|
|
if line.startswith(";TIME:") or line.startswith(";PRINT.TIME:"):
|
|
self.time_total = int(line.split(":")[1])
|
|
break
|
|
if display_option == "filename_layer":
|
|
data = self._display_filename_layer(data)
|
|
else:
|
|
data = self._display_progress(data)
|
|
return data
|
|
|
|
# This is from the original 'Display Filename and Layer on LCD'
|
|
def _display_filename_layer(self, data: str) -> str:
|
|
data[0] = self._add_stats(data)
|
|
max_layer = 0
|
|
format_option = self.getSettingValueByKey("format_option")
|
|
lcd_text = "M117 "
|
|
octo_text = "M118 "
|
|
if self.getSettingValueByKey("file_name") != "":
|
|
file_name = self.getSettingValueByKey("file_name")
|
|
else:
|
|
file_name = Application.getInstance().getPrintInformation().jobName
|
|
if self.getSettingValueByKey("addPrefixPrinting"):
|
|
lcd_text += "Printing "
|
|
octo_text += "Printing "
|
|
if not format_option:
|
|
lcd_text += "Lay "
|
|
octo_text += "Layer "
|
|
else:
|
|
lcd_text += file_name + " - Layer "
|
|
octo_text += file_name + " - Layer "
|
|
i = self.getSettingValueByKey("startNum")
|
|
for layer in data:
|
|
display_text = lcd_text + str(i)
|
|
self.m118_text = octo_text + str(i)
|
|
layer_index = data.index(layer)
|
|
lines = layer.split("\n")
|
|
for line in lines:
|
|
if line.startswith(";LAYER_COUNT:"):
|
|
max_layer = line
|
|
max_layer = max_layer.split(":")[1]
|
|
if self.getSettingValueByKey("startNum") == 0:
|
|
max_layer = str(int(max_layer) - 1)
|
|
if line.startswith(";LAYER:"):
|
|
if self.getSettingValueByKey("maxlayer"):
|
|
display_text += "/" + max_layer
|
|
self.m118_text += "/" + max_layer
|
|
if not format_option:
|
|
display_text += "|" + file_name
|
|
self.m118_text += " | " + file_name
|
|
else:
|
|
if not format_option:
|
|
display_text += "|" + file_name + "!"
|
|
self.m118_text += " | " + file_name + "!"
|
|
else:
|
|
display_text += "!"
|
|
self.m118_text += "!"
|
|
line_index = lines.index(line)
|
|
if self.add_m117_line:
|
|
lines.insert(line_index + 1, display_text)
|
|
if self.add_m118_line:
|
|
if self.add_m118_a1:
|
|
self.m118_text = self.m118_text.replace("M118 ","M118 A1 ")
|
|
if self.add_m118_p0:
|
|
self.m118_text = self.m118_text.replace("M118 ","M118 P0 ")
|
|
lines.insert(line_index + 2, self.m118_text)
|
|
i += 1
|
|
final_lines = "\n".join(lines)
|
|
data[layer_index] = final_lines
|
|
if bool(self.getSettingValueByKey("enable_end_message")):
|
|
message_str = self._message_to_user(self.getSettingValueByKey("speed_factor") / 100)
|
|
Message(title = "Display Info on LCD - Estimated Finish Time", text = message_str[0] + "\n\n" + message_str[1] + "\n" + message_str[2] + "\n" + message_str[3]).show()
|
|
return data
|
|
|
|
# This is from 'Show Progress on LCD'
|
|
def _display_progress(self, data: str) -> str:
|
|
# Add some common print settings to the start of the gcode
|
|
data[0] = self._add_stats(data)
|
|
# Get settings
|
|
print_sequence = Application.getInstance().getGlobalContainerStack().getProperty("print_sequence", "value")
|
|
display_total_layers = self.getSettingValueByKey("display_total_layers")
|
|
display_remaining_time = self.getSettingValueByKey("display_remaining_time")
|
|
speed_factor = self.getSettingValueByKey("speed_factor") / 100
|
|
m73_time = False
|
|
m73_percent = False
|
|
if self.add_m73_line and self.add_m73_time:
|
|
m73_time = True
|
|
if self.add_m73_line and self.add_m73_percent:
|
|
m73_percent = True
|
|
if self.add_m73_line:
|
|
data[1] = "M75\n" + data[1]
|
|
data[len(data)-1] += "M77\n"
|
|
# Initialize some variables
|
|
first_layer_index = 0
|
|
number_of_layers = 0
|
|
time_elapsed = 0
|
|
|
|
# If at least one of the settings is disabled, there is enough room on the display to display "layer"
|
|
first_section = data[0]
|
|
lines = first_section.split("\n")
|
|
pause_cmd = []
|
|
for line in lines:
|
|
if line.startswith(";TIME:"):
|
|
tindex = lines.index(line)
|
|
cura_time = int(line.split(":")[1])
|
|
print_time = cura_time * speed_factor
|
|
hhh = print_time/3600
|
|
hr = round(hhh // 1)
|
|
mmm = round((hhh % 1) * 60)
|
|
orig_hhh = cura_time/3600
|
|
orig_hr = round(orig_hhh // 1)
|
|
orig_mmm = math.floor((orig_hhh % 1) * 60)
|
|
if self.add_m118_line:
|
|
lines.insert(len(lines) - 2, f"M118 Adjusted Print Time is {hr} hr {mmm} min")
|
|
if self.add_m117_line:
|
|
lines.insert(len(lines) - 2, f"M117 ET {hr} hr {mmm} min")
|
|
# Add M73 line at beginning
|
|
mins = int(60 * hr + mmm)
|
|
if self.add_m73_line and (self.add_m73_time or self.add_m73_percent):
|
|
if m73_time:
|
|
self.m73_str += " R{}".format(mins)
|
|
if m73_percent:
|
|
self.m73_str += " P0"
|
|
lines.insert(tindex + 4, "M73" + self.m73_str)
|
|
# If Countdown to pause is enabled then count the pauses
|
|
pause_str = ""
|
|
if bool(self.getSettingValueByKey("countdown_to_pause")):
|
|
pause_count = 0
|
|
pause_setting = self.getSettingValueByKey("pause_cmd").upper()
|
|
if pause_setting != "":
|
|
pause_cmd = []
|
|
if "," in pause_setting:
|
|
pause_cmd = pause_setting.split(",")
|
|
else:
|
|
pause_cmd.append(pause_setting)
|
|
for q in range(0, len(pause_cmd)):
|
|
pause_cmd[q] = "\n" + pause_cmd[q]
|
|
for num in range(2,len(data) - 2, 1):
|
|
for q in range(0,len(pause_cmd)):
|
|
if pause_cmd[q] in data[num]:
|
|
pause_count += data[num].count(pause_cmd[q], 0, len(data[num]))
|
|
pause_str = f"with {pause_count} pause" + ("s" if pause_count > 1 else "")
|
|
else:
|
|
pause_str = ""
|
|
# This line goes in to convert seconds to hours and minutes
|
|
lines.insert(tindex + 1, f";Cura Time Estimate: {orig_hr}hr {orig_mmm}min {pause_str}")
|
|
data[0] = "\n".join(lines)
|
|
if self.add_m117_line:
|
|
data[len(data)-1] += "M117 Orig Cura Est " + str(orig_hr) + "hr " + str(orig_mmm) + "min\n"
|
|
if self.add_m118_line:
|
|
data[len(data)-1] += "M118 Est w/FudgeFactor " + str(speed_factor * 100) + "% was " + str(hr) + "hr " + str(mmm) + "min\n"
|
|
if not display_total_layers or not display_remaining_time:
|
|
base_display_text = "layer "
|
|
else:
|
|
base_display_text = ""
|
|
layer = data[len(data)-1]
|
|
data[len(data)-1] = layer.replace(";End of Gcode" + "\n", "")
|
|
data[len(data)-1] += ";End of Gcode" + "\n"
|
|
# Search for the number of layers and the total time from the start code
|
|
for index in range(len(data)):
|
|
data_section = data[index]
|
|
# We have everything we need, save the index of the first layer and exit the loop
|
|
if ";LAYER:" in data_section:
|
|
first_layer_index = index
|
|
break
|
|
else:
|
|
for line in data_section.split("\n"):
|
|
if line.startswith(";LAYER_COUNT:"):
|
|
number_of_layers = int(line.split(":")[1])
|
|
if print_sequence == "one_at_a_time":
|
|
number_of_layers = 1
|
|
for lay in range(2,len(data)-1,1):
|
|
if ";LAYER:" in data[lay]:
|
|
number_of_layers += 1
|
|
# for all layers...
|
|
current_layer = 0
|
|
for layer_counter in range(len(data)-2):
|
|
current_layer += 1
|
|
layer_index = first_layer_index + layer_counter
|
|
display_text = base_display_text
|
|
display_text += str(current_layer)
|
|
# create a list where each element is a single line of code within the layer
|
|
lines = data[layer_index].split("\n")
|
|
if not ";LAYER:" in data[layer_index]:
|
|
current_layer -= 1
|
|
continue
|
|
# add the total number of layers if this option is checked
|
|
if display_total_layers:
|
|
display_text += "/" + str(number_of_layers)
|
|
# if display_remaining_time is checked, it is calculated in this loop
|
|
if display_remaining_time:
|
|
time_remaining_display = " | ET " # initialize the time display
|
|
m = (self.time_total - time_elapsed) // 60 # estimated time in minutes
|
|
m *= speed_factor # correct for printing time
|
|
m = int(m)
|
|
h, m = divmod(m, 60) # convert to hours and minutes
|
|
# add the time remaining to the display_text
|
|
if h > 0: # if it's more than 1 hour left, display format = xhxxm
|
|
time_remaining_display += str(h) + "h"
|
|
if m < 10: # add trailing zero if necessary
|
|
time_remaining_display += "0"
|
|
time_remaining_display += str(m) + "m"
|
|
else:
|
|
time_remaining_display += str(m) + "m"
|
|
display_text += time_remaining_display
|
|
# find time_elapsed at the end of the layer (used to calculate the remaining time of the next layer)
|
|
if not current_layer == number_of_layers:
|
|
for line_index in range(len(lines) - 1, -1, -1):
|
|
line = lines[line_index]
|
|
if line.startswith(";TIME_ELAPSED:"):
|
|
# update time_elapsed for the NEXT layer and exit the loop
|
|
time_elapsed = int(float(line.split(":")[1]))
|
|
break
|
|
# insert the text AFTER the first line of the layer (in case other scripts use ";LAYER:")
|
|
for l_index, line in enumerate(lines):
|
|
if line.startswith(";LAYER:"):
|
|
if self.add_m117_line:
|
|
lines[l_index] += "\nM117 " + display_text
|
|
if self.add_m118_line:
|
|
m118_text = "\nM118 "
|
|
if self.add_m118_a1:
|
|
m118_text += "A1 "
|
|
if self.add_m118_p0:
|
|
m118_text += "P0 "
|
|
lines[l_index] += m118_text + display_text
|
|
# add M73 line
|
|
if display_remaining_time:
|
|
mins = int(60 * h + m)
|
|
if self.add_m73_line and (self.add_m73_time or self.add_m73_percent):
|
|
self.m73_str = ""
|
|
if m73_time and display_remaining_time:
|
|
self.m73_str += " R{}".format(mins)
|
|
if m73_percent:
|
|
self.m73_str += " P" + str(round(int(current_layer) / int(number_of_layers) * 100))
|
|
lines[l_index] += "\nM73" + self.m73_str
|
|
break
|
|
# overwrite the layer with the modified layer
|
|
data[layer_index] = "\n".join(lines)
|
|
|
|
# If enabled then change the ET to TP for 'Time To Pause'
|
|
time_list = []
|
|
if bool(self.getSettingValueByKey("countdown_to_pause")):
|
|
time_list.append("0")
|
|
time_list.append("0")
|
|
this_time = 0
|
|
pause_index = 1
|
|
|
|
# Get the layer times
|
|
for num in range(2,len(data) - 1):
|
|
layer = data[num]
|
|
lines = layer.split("\n")
|
|
for line in lines:
|
|
if line.startswith(";TIME_ELAPSED:"):
|
|
this_time = (float(line.split(":")[1]))*speed_factor
|
|
time_list.append(str(this_time))
|
|
for p_cmd in pause_cmd:
|
|
if p_cmd in layer:
|
|
for qnum in range(num - 1, pause_index, -1):
|
|
time_list[qnum] = str(float(this_time) - float(time_list[qnum])) + "P"
|
|
pause_index = num-1
|
|
break
|
|
|
|
# Make the adjustments to the M117 (and M118) lines that are prior to a pause
|
|
for num in range (2, len(data) - 1,1):
|
|
layer = data[num]
|
|
lines = layer.split("\n")
|
|
for line in lines:
|
|
try:
|
|
if line.startswith("M117") and "|" in line and "P" in time_list[num]:
|
|
time_to_go = self._get_time_to_go(time_list[num])
|
|
M117_line = line.split("|")[0] + "| TP " + time_to_go
|
|
layer = layer.replace(line, M117_line)
|
|
if line.startswith("M118") and "|" in line and "P" in time_list[num]:
|
|
time_to_go = self._get_time_to_go(time_list[num])
|
|
M118_line = line.split("|")[0] + "| TP " + time_to_go
|
|
layer = layer.replace(line, M118_line)
|
|
except:
|
|
continue
|
|
data[num] = layer
|
|
if bool(self.getSettingValueByKey("enable_end_message")):
|
|
message_str = self._message_to_user(data, speed_factor, pause_cmd)
|
|
Message(title = "[Display Info on LCD] - Estimated Finish Time", text = message_str[0] + "\n\n" + message_str[1] + "\n" + message_str[2] + "\n" + message_str[3]).show()
|
|
return data
|
|
|
|
def _message_to_user(self, data: str, speed_factor: float, pause_cmd: str) -> str:
|
|
"""
|
|
Message the user of the projected finish time of the print and when any pauses might occur
|
|
"""
|
|
print_time = Application.getInstance().getPrintInformation().currentPrintTime.getDisplayString(DurationFormat.Format.ISO8601)
|
|
print_start_time = self.getSettingValueByKey("print_start_time")
|
|
# If the user entered a print start time make sure it is in the correct format or ignore it.
|
|
if print_start_time == "" or print_start_time == "0" or len(print_start_time) != 5 or not ":" in print_start_time:
|
|
print_start_time = ""
|
|
# Change the print start time to proper time format, or, use the current time
|
|
if print_start_time != "":
|
|
hr = int(print_start_time.split(":")[0])
|
|
min = int(print_start_time.split(":")[1])
|
|
sec = 0
|
|
else:
|
|
hr = int(time.strftime("%H"))
|
|
min = int(time.strftime("%M"))
|
|
sec = int(time.strftime("%S"))
|
|
|
|
#Get the current data/time info
|
|
yr = int(time.strftime("%Y"))
|
|
day = int(time.strftime("%d"))
|
|
mo = int(time.strftime("%m"))
|
|
|
|
date_and_time = datetime.datetime(yr, mo, day, hr, min, sec)
|
|
#Split the Cura print time
|
|
pr_hr = int(print_time.split(":")[0])
|
|
pr_min = int(print_time.split(":")[1])
|
|
pr_sec = int(print_time.split(":")[2])
|
|
#Adjust the print time if none was entered
|
|
print_seconds = pr_hr*3600 + pr_min*60 + pr_sec
|
|
#Adjust the total seconds by the Fudge Factor
|
|
adjusted_print_time = print_seconds * speed_factor
|
|
#Break down the adjusted seconds back into hh:mm:ss
|
|
adj_hr = int(adjusted_print_time/3600)
|
|
print_seconds = adjusted_print_time - (adj_hr * 3600)
|
|
adj_min = int(print_seconds) / 60
|
|
adj_sec = int(print_seconds - (adj_min * 60))
|
|
#Get the print time to add to the start time
|
|
time_change = datetime.timedelta(hours=adj_hr, minutes=adj_min, seconds=adj_sec)
|
|
new_time = date_and_time + time_change
|
|
#Get the day of the week that the print will end on
|
|
week_day = str(["Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday"][int(new_time.strftime("%w"))])
|
|
#Get the month that the print will end in
|
|
mo_str = str(["January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December"][int(new_time.strftime("%m"))-1])
|
|
#Make adjustments from 24hr time to 12hr time
|
|
if int(new_time.strftime("%H")) > 12:
|
|
show_hr = str(int(new_time.strftime("%H")) - 12) + ":"
|
|
show_ampm = " PM"
|
|
elif int(new_time.strftime("%H")) == 0:
|
|
show_hr = "12:"
|
|
show_ampm = " AM"
|
|
else:
|
|
show_hr = str(new_time.strftime("%H")) + ":"
|
|
show_ampm = " AM"
|
|
if print_start_time == "":
|
|
start_str = "Now"
|
|
else:
|
|
start_str = "and your entered 'print start time' of " + print_start_time + "hrs."
|
|
if print_start_time != "":
|
|
print_start_str = "Print Start Time................." + str(print_start_time) + "hrs"
|
|
else:
|
|
print_start_str = "Print Start Time.................Now"
|
|
estimate_str = "Cura Time Estimate.........." + str(print_time)
|
|
adjusted_str = "Adjusted Time Estimate..." + str(time_change)
|
|
finish_str = f"{week_day} {mo_str} {new_time.strftime('%d')}, {new_time.strftime('%Y')} at {show_hr}{new_time.strftime('%M')}{show_ampm}"
|
|
|
|
# If there are pauses and if countdown is enabled, then add the time-to-pause to the message.
|
|
if bool(self.getSettingValueByKey("countdown_to_pause")):
|
|
num = 1
|
|
for layer in data:
|
|
for p_cmd in pause_cmd:
|
|
if p_cmd in layer or "Do the actual pause" in layer:
|
|
adjusted_str += "\n" + self._get_time_to_go(layer.split("TIME_ELAPSED:")[1].split("\n")[0]) + " ET from start to pause #" + str(num)
|
|
num += 1
|
|
return finish_str, estimate_str, adjusted_str, print_start_str
|
|
|
|
def _get_time_to_go(self, time_str: str):
|
|
"""
|
|
Converts a time string in seconds to a human-readable format (e.g., "2h30m").
|
|
:param time_str: The time string in seconds.
|
|
:return: A formatted string representing the time.
|
|
"""
|
|
alt_time = time_str[:-1]
|
|
total_seconds = float(alt_time)
|
|
hours = int(total_seconds // 3600)
|
|
minutes = int((total_seconds % 3600) // 60)
|
|
seconds = int(total_seconds % 60)
|
|
time_to_go = f"{hours}h" if hours > 0 else ""
|
|
time_to_go += f"{minutes}m"
|
|
if hours == 0:
|
|
time_to_go += f"{seconds}s"
|
|
return time_to_go
|
|
|
|
def _add_stats(self, data: str) -> str:
|
|
global_stack = Application.getInstance().getGlobalContainerStack()
|
|
"""
|
|
Make a list of the models in the file.
|
|
Add some of the filament stats to the first section of the gcode.
|
|
"""
|
|
model_list = []
|
|
for mdex, layer in enumerate(data):
|
|
layer = data[mdex].split("\n")
|
|
for line in layer:
|
|
if line.startswith(";MESH:") and "NONMESH" not in line:
|
|
model_name = line.split(":")[1]
|
|
if not model_name in model_list:
|
|
model_list.append(model_name)
|
|
# Filament stats
|
|
extruder_count = global_stack.getProperty("machine_extruder_count", "value")
|
|
layheight_0 = global_stack.getProperty("layer_height_0", "value")
|
|
init_layer_hgt_line = ";Initial Layer Height: " + f"{layheight_0:.2f}".format(layheight_0)
|
|
filament_line_t0 = ";Extruder 1 (T0)\n"
|
|
filament_amount = Application.getInstance().getPrintInformation().materialLengths
|
|
filament_line_t0 += f"; Filament used: {filament_amount[0]}m\n"
|
|
filament_line_t0 += f"; Filament Type: {global_stack.extruderList[0].material.getMetaDataEntry("material", "")}\n"
|
|
filament_line_t0 += f"; Filament Dia.: {global_stack.extruderList[0].getProperty("material_diameter", "value")}mm\n"
|
|
filament_line_t0 += f"; Nozzle Size : {global_stack.extruderList[0].getProperty("machine_nozzle_size", "value")}mm\n"
|
|
filament_line_t0 += f"; Print Temp. : {global_stack.extruderList[0].getProperty("material_print_temperature", "value")}°\n"
|
|
filament_line_t0 += f"; Bed Temp. : {global_stack.extruderList[0].getProperty("material_bed_temperature", "value")}°"
|
|
|
|
# if there is more than one extruder then get the stats for the second one.
|
|
filament_line_t1 = ""
|
|
if extruder_count > 1:
|
|
filament_line_t1 = "\n;Extruder 2 (T1)\n"
|
|
filament_line_t1 += f"; Filament used: {filament_amount[1]}m\n"
|
|
filament_line_t1 += f"; Filament Type: {global_stack.extruderList[1].material.getMetaDataEntry("material", "")}\n"
|
|
filament_line_t1 += f"; Filament Dia.: {global_stack.extruderList[1].getProperty("material_diameter", "value")}mm\n"
|
|
filament_line_t1 += f"; Nozzle Size : {global_stack.extruderList[1].getProperty("machine_nozzle_size", "value")}mm\n"
|
|
filament_line_t1 += f"; Print Temp. : {global_stack.extruderList[1].getProperty("material_print_temperature", "value")}°"
|
|
|
|
# Calculate the cost of electricity for the print
|
|
electricity_cost = self.getSettingValueByKey("electricity_cost")
|
|
printer_power_usage = self.getSettingValueByKey("printer_power_usage")
|
|
currency_unit = Application.getInstance().getPreferences().getValue("cura/currency")
|
|
total_cost_electricity = (printer_power_usage / 1000) * (self.time_total / 3600) * electricity_cost
|
|
|
|
# Add the stats to the gcode file
|
|
lines = data[0].split("\n")
|
|
for index, line in enumerate(lines):
|
|
if line.startswith(";Layer height:") or line.startswith(";TARGET_MACHINE.NAME:"):
|
|
lines[index] = ";Layer height: " + f"{global_stack.getProperty("layer_height", "value")}"
|
|
lines[index] += f"\n{init_layer_hgt_line}"
|
|
lines[index] += f"\n;Base Quality Name : '{global_stack.quality.getMetaDataEntry("name", "")}'"
|
|
lines[index] += f"\n;Custom Quality Name: '{global_stack.qualityChanges.getMetaDataEntry("name")}'"
|
|
if line.startswith(";Filament used"):
|
|
lines[index] = filament_line_t0 + filament_line_t1 + f"\n;Electric Cost: {currency_unit}{total_cost_electricity:.2f}".format(total_cost_electricity)
|
|
# The target machine "machine_name" is actually the printer model. This adds the user defined printer name to the "TARGET_MACHINE" line.
|
|
if line.startswith(";TARGET_MACHINE"):
|
|
machine_model = str(global_stack.getProperty("machine_name", "value"))
|
|
machine_name = str(global_stack.getName())
|
|
lines[index] += f" / {machine_name}"
|
|
if "MINX" in line or "MIN.X" in line:
|
|
# Add the Object List
|
|
lines[index - 1] += f"\n;Model List: {str(model_list)}"
|
|
return "\n".join(lines) |