| .. |
|
um_s3_aa0.4_abs_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_abs_0.2mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_abs_0.3mm.inst.cfg
|
Corrected Generic ABS 0.3mm mode from 245C to 252C to align with the Any color modes. Updated the PETG 0.3mm print temperatures for the AA0.4 nozzle from 240C to 245C.
|
2023-09-19 11:09:44 +02:00 |
|
um_s3_aa0.4_abs_0.06mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_abs_0.15mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_bam_0.1mm.inst.cfg
|
Cleanup skin overlap. Set to 20% by default for S line machines.
|
2023-05-15 11:56:07 +02:00 |
|
um_s3_aa0.4_bam_0.2mm.inst.cfg
|
Cleanup skin overlap. Set to 20% by default for S line machines.
|
2023-05-15 11:56:07 +02:00 |
|
um_s3_aa0.4_bam_0.3mm.inst.cfg
|
Cleanup skin overlap. Set to 20% by default for S line machines.
|
2023-05-15 11:56:07 +02:00 |
|
um_s3_aa0.4_bam_0.15mm.inst.cfg
|
Merge branch 'main' into PP-249_53_enable-support-brim
|
2023-04-20 23:31:37 +02:00 |
|
um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_cpe_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_cpe_0.2mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_cpe_0.06mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_cpe_0.15mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_nylon_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_nylon_0.2mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_nylon_0.06mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_nylon_0.15mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_pc_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_pc_0.2mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_pc_0.06mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_pc_0.15mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_petg_0.1mm.inst.cfg
|
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
2023-07-10 20:52:06 +02:00 |
|
um_s3_aa0.4_petg_0.2mm.inst.cfg
|
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
2023-07-10 20:52:06 +02:00 |
|
um_s3_aa0.4_petg_0.3mm.inst.cfg
|
Corrected Generic ABS 0.3mm mode from 245C to 252C to align with the Any color modes. Updated the PETG 0.3mm print temperatures for the AA0.4 nozzle from 240C to 245C.
|
2023-09-19 11:09:44 +02:00 |
|
um_s3_aa0.4_petg_0.06mm.inst.cfg
|
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
2023-07-10 20:52:06 +02:00 |
|
um_s3_aa0.4_petg_0.15mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_pla_0.1mm.inst.cfg
|
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
2023-07-10 20:52:06 +02:00 |
|
um_s3_aa0.4_pla_0.2mm.inst.cfg
|
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
2023-07-10 20:52:06 +02:00 |
|
um_s3_aa0.4_pla_0.3mm.inst.cfg
|
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
2023-07-10 20:52:06 +02:00 |
|
um_s3_aa0.4_pla_0.06mm.inst.cfg
|
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
2023-07-10 20:52:06 +02:00 |
|
um_s3_aa0.4_pla_0.15mm.inst.cfg
|
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
2023-07-10 20:52:06 +02:00 |
|
um_s3_aa0.4_pp_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_pp_0.2mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_pp_0.15mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_tough-pla_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_tough-pla_0.2mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_tough-pla_0.3mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_tough-pla_0.06mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_tough-pla_0.15mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_tpu_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_tpu_0.2mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_tpu_0.15mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.4_um-abs_0.1mm.inst.cfg
|
Restore old z support formula.
|
2024-01-18 13:48:14 +01:00 |
|
um_s3_aa0.4_um-abs_0.2mm.inst.cfg
|
Restore old z support formula.
|
2024-01-18 13:48:14 +01:00 |
|
um_s3_aa0.4_um-abs_0.3mm.inst.cfg
|
Restore old z support formula.
|
2024-01-18 13:48:14 +01:00 |
|
um_s3_aa0.4_um-abs_0.06mm.inst.cfg
|
Restore old z support formula.
|
2024-01-18 13:48:14 +01:00 |
|
um_s3_aa0.4_um-abs_0.15mm.inst.cfg
|
Restore old z support formula.
|
2024-01-18 13:48:14 +01:00 |
|
um_s3_aa0.4_um-petg_0.1mm.inst.cfg
|
Restore old z support formula.
|
2024-01-18 13:48:14 +01:00 |
|
um_s3_aa0.4_um-petg_0.2mm.inst.cfg
|
Restore old z support formula.
|
2024-01-18 13:48:14 +01:00 |
|
um_s3_aa0.4_um-petg_0.3mm.inst.cfg
|
Restore old z support formula.
|
2024-01-18 13:48:14 +01:00 |
|
um_s3_aa0.4_um-petg_0.06mm.inst.cfg
|
Restore old z support formula.
|
2024-01-18 13:48:14 +01:00 |
|
um_s3_aa0.4_um-petg_0.15mm.inst.cfg
|
Restore old z support formula.
|
2024-01-18 13:48:14 +01:00 |
|
um_s3_aa0.4_um-pla_0.1mm.inst.cfg
|
Regenerated from autogenerate
|
2024-01-18 13:43:59 +01:00 |
|
um_s3_aa0.4_um-pla_0.2mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.4_um-pla_0.3mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.4_um-pla_0.06mm.inst.cfg
|
Regenerated from autogenerate
|
2024-01-18 13:43:59 +01:00 |
|
um_s3_aa0.4_um-pla_0.15mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg
|
Regenerated from autogenerate
|
2024-01-18 13:43:59 +01:00 |
|
um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg
|
Regenerated from autogenerate
|
2024-01-18 13:43:59 +01:00 |
|
um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.8_abs_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_abs_0.3mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_abs_0.4mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_cpe_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_cpe_0.3mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_cpe_0.4mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_nylon_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_nylon_0.3mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_nylon_0.4mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_pc_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_pc_0.3mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_pc_0.4mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_petg_0.2mm.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_aa0.8_petg_0.3mm.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_aa0.8_petg_0.4mm.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_aa0.8_pla_0.2mm.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_aa0.8_pla_0.3mm.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_aa0.8_pla_0.4mm.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_aa0.8_pp_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_pp_0.3mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_pp_0.4mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_tough-pla_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_tough-pla_0.3mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_tough-pla_0.4mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_tpu_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_tpu_0.3mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_tpu_0.4mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_aa0.8_um-abs_0.2mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.8_um-abs_0.3mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.8_um-abs_0.4mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.8_um-petg_0.2mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.8_um-petg_0.3mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.8_um-petg_0.4mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.8_um-pla_0.2mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.8_um-pla_0.3mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.8_um-pla_0.4mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg
|
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
2024-01-17 13:24:34 +01:00 |
|
um_s3_aa0.25_abs_0.1mm.inst.cfg
|
Set initial fan speed for AA0.25 ABS 0.1mm print mode to 0% to increase adhesion robustness.
|
2024-01-10 10:02:46 +01:00 |
|
um_s3_aa0.25_cpe_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.25_nylon_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.25_pc_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.25_petg_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.25_pla_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.25_pp_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.25_tough-pla_0.1mm.inst.cfg
|
Merge branch 'main' into PP-350_cleanup_print_temperature
|
2023-09-12 10:21:21 +02:00 |
|
um_s3_aa0.25_um-abs_0.1mm.inst.cfg
|
Restore old z support formula.
|
2024-01-18 13:48:14 +01:00 |
|
um_s3_aa0.25_um-petg_0.1mm.inst.cfg
|
Restore old z support formula.
|
2024-01-18 13:48:14 +01:00 |
|
um_s3_aa0.25_um-pla_0.1mm.inst.cfg
|
Regenerated from autogenerate
|
2024-01-18 13:43:59 +01:00 |
|
um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg
|
Default temperature corrections on the any color profiles
|
2023-09-19 09:43:39 +02:00 |
|
um_s3_bb0.4_pva_0.1mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_bb0.4_pva_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_bb0.4_pva_0.3mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_bb0.4_pva_0.06mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_bb0.4_pva_0.15mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_bb0.8_pva_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_bb0.8_pva_0.3mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_bb0.8_pva_0.4mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_cc0.4_cffcpe_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_cc0.4_cffcpe_0.15mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_cc0.4_cffpa_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_cc0.4_cffpa_0.15mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_cc0.4_gffcpe_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_cc0.4_gffcpe_0.15mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_cc0.4_gffpa_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_cc0.4_gffpa_0.15mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_cc0.4_petcf_0.2mm.inst.cfg
|
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
2023-07-10 20:52:06 +02:00 |
|
um_s3_cc0.4_petcf_0.15mm.inst.cfg
|
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
2023-07-10 20:52:06 +02:00 |
|
um_s3_cc0.4_pla_0.2mm.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_cc0.4_pla_0.15mm.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_cc0.4_um-pla_0.2mm.inst.cfg
|
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
2023-09-01 16:03:33 +02:00 |
|
um_s3_cc0.4_um-pla_0.15mm.inst.cfg
|
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
2023-09-01 16:03:33 +02:00 |
|
um_s3_cc0.6_cffcpe_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_cc0.6_cffpa_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_cc0.6_gffcpe_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_cc0.6_gffpa_0.2mm.inst.cfg
|
Move temperature deltas to quality profiles
|
2023-06-27 17:47:55 +02:00 |
|
um_s3_cc0.6_petcf_0.2mm.inst.cfg
|
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
2023-07-10 20:52:06 +02:00 |
|
um_s3_cc0.6_petcf_0.3mm.inst.cfg
|
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
2023-07-10 20:52:06 +02:00 |
|
um_s3_cc0.6_petcf_0.15mm.inst.cfg
|
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
2023-07-10 20:52:06 +02:00 |
|
um_s3_cc0.6_pla_0.2mm.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_cc0.6_pla_0.15mm.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_cc0.6_um-pla_0.2mm.inst.cfg
|
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
2023-09-01 16:03:33 +02:00 |
|
um_s3_cc0.6_um-pla_0.15mm.inst.cfg
|
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
2023-09-01 16:03:33 +02:00 |
|
um_s3_global_Draft_Quality.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_global_Fast_Quality.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_global_High_Quality.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_global_Normal_Quality.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_global_Superdraft_Quality.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
um_s3_global_Verydraft_Quality.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
