mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-10-10 15:27:53 -06:00
80698c47de
This will determine which file formats a machine is able to save to. The setting is currently not yet used. It will be used to filter the output formats under the Save to File dialogue. Contributes to issue CURA-611.
63 lines
3.1 KiB
JSON
63 lines
3.1 KiB
JSON
{
|
|
"id": "bq_hephestos_xl",
|
|
"version": 1,
|
|
"name": "BQ Prusa i3 Hephestos XL",
|
|
"manufacturer": "Other",
|
|
"author": "BQ",
|
|
"platform": "bq_hephestos_platform.stl",
|
|
"inherits": "fdmprinter.json",
|
|
|
|
"machine_settings": {
|
|
"machine_start_gcode": {
|
|
"default": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z15.0 F1200 ;move Z to position 15.0 mm\nG92 E0 ;zero the extruded length\nG1 E20 F200 ;extrude 20mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F7200 ;set feedrate to 120 mm/sec\n; -- end of START GCODE --"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nG91 ;set to relative positioning\nG1 E-20 F300 ;retract the filament a bit to release some of the pressure\nG1 Z10 ;move extruder up 10 mm\nG90 ;set to absolute positioning\nG1 X0 Y180 F1200 ;expose the platform\nM84 ;turn off steppers\n; -- end of END GCODE --"
|
|
},
|
|
"machine_width": {
|
|
"default": 200
|
|
},
|
|
"machine_depth": {
|
|
"default": 300
|
|
},
|
|
"machine_height": {
|
|
"default": 180
|
|
},
|
|
"machine_heated_bed": {
|
|
"default": false
|
|
},
|
|
"machine_center_is_zero": {
|
|
"default": false
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default": "RepRap"
|
|
},
|
|
"machine_platform_offset": {
|
|
"default": [0, -82, 0]
|
|
},
|
|
"machine_file_formats": {
|
|
"default": "text/x-gcode",
|
|
}
|
|
},
|
|
"overrides": {
|
|
"layer_height": { "default": 0.2 },
|
|
"layer_height_0": { "default": 0.2, "visible": false },
|
|
"shell_thickness": { "default": 1.0 },
|
|
"wall_thickness": { "default": 1.0, "visible": false },
|
|
"top_bottom_thickness": { "default": 1.0, "visible": false},
|
|
"bottom_thickness": { "default": 1.0, "visible": false },
|
|
"material_print_temperature": { "default": 220, "visible": true },
|
|
"material_bed_temperature": { "default": 0, "visible": false },
|
|
"material_diameter": { "default": 1.75, "visible": true },
|
|
"speed_print": { "default": 40.0},
|
|
"speed_infill": { "default": 40.0, "visible": true },
|
|
"speed_wall": { "default": 35.0, "visible": true},
|
|
"speed_topbottom": { "default": 35.0, "visible": true },
|
|
"speed_travel": { "default": 120.0 },
|
|
"speed_layer_0": { "default": 20.0, "visible": false },
|
|
"retraction_speed": { "default": 30.0, "visible": false},
|
|
"retraction_amount": { "default": 2.0, "visible": false },
|
|
"retraction_hop": { "default": 0.075, "visible": false },
|
|
"support_enable": { "default": true }
|
|
}
|
|
}
|