mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-10 23:35:07 -06:00
90b4e4e654
Ultimaker origin overrides the value, so the default_value override is not effective causing the unittest fail additionally the value must be formatted correctly to resolve.
78 lines
No EOL
3.7 KiB
JSON
78 lines
No EOL
3.7 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Ultimaker Original Dual Extrusion",
|
|
"inherits": "ultimaker_original",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "Ultimaker",
|
|
"manufacturer": "Ultimaker B.V.",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "ultimaker_platform.3mf",
|
|
"exclude_materials": [
|
|
"generic_cffcpe",
|
|
"generic_cffpa",
|
|
"generic_flexible",
|
|
"generic_gffcpe",
|
|
"generic_gffpa",
|
|
"generic_hips",
|
|
"generic_petcf",
|
|
"generic_petg",
|
|
"generic_pva",
|
|
"generic_tough_pla",
|
|
"structur3d_",
|
|
"ultimaker_bam",
|
|
"ultimaker_petcf",
|
|
"ultimaker_petg",
|
|
"ultimaker_pva",
|
|
"ultimaker_tough_pla"
|
|
],
|
|
"firmware_file": "MarlinUltimaker-{baudrate}-dual.hex",
|
|
"firmware_hbk_file": "MarlinUltimaker-HBK-{baudrate}-dual.hex",
|
|
"first_start_actions": [
|
|
"UMOUpgradeSelection",
|
|
"BedLevel"
|
|
],
|
|
"has_machine_quality": true,
|
|
"has_materials": true,
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "ultimaker_original_dual_1st",
|
|
"1": "ultimaker_original_dual_2nd"
|
|
},
|
|
"quality_definition": "ultimaker_original",
|
|
"supported_actions": [
|
|
"UMOUpgradeSelection",
|
|
"BedLevel"
|
|
],
|
|
"weight": 4
|
|
},
|
|
"overrides":
|
|
{
|
|
"cool_fan_speed_0": { "value": "cool_fan_speed_min" },
|
|
"gantry_height": { "value": "55" },
|
|
"infill_before_walls": { "value": "True" },
|
|
"layer_height_0": { "value": "max(0.2, layer_height)" },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_depth": { "default_value": 195 },
|
|
"machine_end_gcode": { "value": "'M104 T0 S0 ;1st extruder heater off\\nM104 T1 S0 ;2nd extruder heater off' + ('\\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning'" },
|
|
"machine_extruder_count": { "default_value": 2 },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[-75, 35],
|
|
[-75, -18],
|
|
[18, 35],
|
|
[18, -18]
|
|
]
|
|
},
|
|
"machine_height": { "default_value": 200 },
|
|
"machine_name": { "default_value": "Ultimaker Original Dual Extrusion" },
|
|
"machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nT1 ;Switch to the 2nd extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F200 E-{switch_extruder_retraction_amount}\nT0 ;Switch to the 1st extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
|
|
"machine_use_extruder_offset_to_offset_coords": { "default_value": true },
|
|
"machine_width": { "default_value": 205 },
|
|
"material_print_temp_wait": { "value": false },
|
|
"speed_slowdown_layers": { "value": 1 }
|
|
}
|
|
} |