mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-05 13:03:59 -06:00
9d5936492a
Removal of all final and initial print temperature offsets, and huge increase in first layer print temperature. These changes should greatly improve first layer extrusion.
62 lines
1.9 KiB
INI
62 lines
1.9 KiB
INI
[general]
|
|
version = 4
|
|
name = Extra Fast
|
|
definition = ultimaker3
|
|
|
|
[metadata]
|
|
setting_version = 5
|
|
type = quality
|
|
quality_type = verydraft
|
|
weight = -3
|
|
material = generic_tpu
|
|
variant = AA 0.8
|
|
|
|
[values]
|
|
brim_width = 8.75
|
|
cool_min_layer_time_fan_speed_max = 6
|
|
top_skin_expand_distance = =line_width * 2
|
|
gradual_infill_step_height = =4 * layer_height
|
|
infill_before_walls = True
|
|
infill_line_width = =round(line_width * 0.7 / 0.8, 2)
|
|
infill_pattern = cross_3d
|
|
infill_sparse_density = 10
|
|
jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
|
|
jerk_support = =math.ceil(jerk_print * 25 / 25)
|
|
jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
|
|
layer_height = 0.3
|
|
machine_nozzle_cool_down_speed = 0.5
|
|
machine_nozzle_heat_up_speed = 2.5
|
|
material_final_print_temperature = =material_print_temperature
|
|
material_flow = 105
|
|
material_initial_print_temperature = =material_print_temperature
|
|
material_print_temperature_layer_0 = =material_print_temperature + 17
|
|
material_standby_temperature = 100
|
|
multiple_mesh_overlap = 0.2
|
|
prime_tower_enable = True
|
|
prime_tower_flow = 100
|
|
retract_at_layer_change = False
|
|
retraction_count_max = 12
|
|
retraction_extra_prime_amount = 0.5
|
|
retraction_hop = 1.5
|
|
retraction_hop_only_when_collides = False
|
|
retraction_min_travel = =line_width * 2
|
|
retraction_prime_speed = 15
|
|
skin_line_width = =round(line_width * 0.78 / 0.8, 2)
|
|
speed_print = 30
|
|
speed_topbottom = =math.ceil(speed_print * 23 / 30)
|
|
speed_travel = 300
|
|
speed_wall = =math.ceil(speed_print * 30 / 30)
|
|
speed_wall_x = =math.ceil(speed_wall * 30 / 30)
|
|
support_angle = 50
|
|
support_bottom_distance = =support_z_distance
|
|
support_line_width = =round(line_width * 0.7 / 0.8, 2)
|
|
support_offset = =line_width
|
|
switch_extruder_prime_speed = 15
|
|
switch_extruder_retraction_amount = 20
|
|
switch_extruder_retraction_speeds = 45
|
|
top_bottom_thickness = 1.2
|
|
travel_avoid_distance = 1.5
|
|
travel_compensate_overlapping_walls_0_enabled = False
|
|
wall_0_wipe_dist = =line_width * 2
|
|
wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
|
|
wall_thickness = 1.3
|