mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-10 07:15:03 -06:00
3eba7cd454
This was causing some files to be just over the limit of file length when given the default printer name on some operating systems. Some file systems, especially encrypted ones, have strict limitations for the maximum length of a file name. With percent-encoding and the extension and postfix we add to these file names, this could go over the limit in file name length for some operating systems. Easy fix is to slightly shorten the name, at least to remove those brackets. Done as a 5 minute fix.
144 lines
8.3 KiB
JSON
144 lines
8.3 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Anycubic i3 Mega S/Pro",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "Nils Hendrik Rottgardt",
|
|
"manufacturer": "Anycubic",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "anycubic_i3_mega_s_platform.3mf",
|
|
"has_materials": true,
|
|
"has_variants": false,
|
|
"has_machine_quality": true,
|
|
"preferred_quality_type": "normal",
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "anycubic_i3_mega_s_extruder_0"
|
|
}
|
|
},
|
|
|
|
"overrides":
|
|
{
|
|
"machine_name": { "default_value": "Anycubic i3 Mega S/Pro" },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_width": { "default_value": 210 },
|
|
"machine_height": { "default_value": 205 },
|
|
"machine_depth": { "default_value": 210 },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"gantry_height": { "value": "0" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_start_gcode": { "default_value": "G21 ; metric values \nG90 ; absolute positioning \nM82 ; set extruder to absolute mode \nM107 ; start with the fan off \nM140 S{material_bed_temperature_layer_0} ; Start heating the bed \nG4 S60 ; wait 1 minute \nM104 S{material_initial_print_temperature} ; start heating the hot end \nM190 S{material_bed_temperature_layer_0} ; wait for bed \nM109 S{material_initial_print_temperature} ; wait for hotend \nM300 S1000 P500 ; BEEP heating done \nG28 X0 Y10 Z0 ; move X/Y to min endstops \nM420 S1 ; Enable leveling \nM420 Z2.0 ; Set leveling fading height to 2 mm \nG0 Z0.15 ; lift nozzle a bit \nG92 E0 ; zero the extruded length \nG1 X50 E25 F500 ; Extrude 25mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-2 F500 ; Retract a little \nG1 X120 F4000 ; Quickly wipe away from the filament line`" },
|
|
"machine_end_gcode": { "default_value": "M104 S0 ; Extruder off \nM140 S0 ; Heatbed off \nM107 ; Fan off \nG91 ; relative positioning \nG1 E-5 F300 ; retract a little \nG1 Z+10 E-5 ; X-20 Y-20 F{travel_xy_speed} ; lift print head \nG28 X0 Y0 ; homing \nG1 Y180 F2000 ; reset feedrate \nM84 ; disable stepper motors \nG90 ; absolute positioning \nM300 S440 P200 ; Make Print Completed Tones \nM300 S660 P250 ; beep \nM300 S880 P300 ; beep" },
|
|
|
|
"machine_max_acceleration_x": { "value": 3000 },
|
|
"machine_max_acceleration_y": { "value": 3000 },
|
|
"machine_max_acceleration_z": { "value": 3000 },
|
|
"machine_max_acceleration_e": { "value": 3000 },
|
|
"machine_acceleration": { "value": 3000 },
|
|
|
|
"machine_max_jerk_xy": { "value": 10 },
|
|
"machine_max_jerk_z": { "value": 0.4 },
|
|
"machine_max_jerk_e": { "value": 5 },
|
|
|
|
"material_diameter": { "default_value": 1.75 },
|
|
|
|
"acceleration_print": { "value": 1800 },
|
|
"acceleration_travel": { "value": 3000 },
|
|
"acceleration_travel_layer_0": { "value": "acceleration_travel" },
|
|
"acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
|
|
|
|
"jerk_print": { "value": 8 },
|
|
"jerk_travel": { "value": 10 },
|
|
"jerk_travel_layer_0": { "value": "jerk_travel" },
|
|
|
|
"acceleration_enabled": { "value": false },
|
|
"jerk_enabled": { "value": true },
|
|
|
|
"speed_print": { "value": 50.0 } ,
|
|
"speed_infill": { "value": "speed_print" },
|
|
"speed_wall": { "value": "speed_print / 2" },
|
|
"speed_wall_0": { "value": "speed_wall" },
|
|
"speed_wall_x": { "value": "speed_wall" },
|
|
"speed_topbottom": { "value": "speed_print / 2" },
|
|
"speed_roofing": { "value": "speed_topbottom" },
|
|
"speed_travel": { "value": 100.0, "maximum_value_warning": 150.0 },
|
|
"speed_layer_0": { "value": 20.0 },
|
|
"speed_print_layer_0": { "value": "speed_layer_0" },
|
|
"speed_travel_layer_0": { "value": 100.0 },
|
|
"speed_prime_tower": { "value": "speed_topbottom" },
|
|
"speed_support": { "value": "speed_wall_0" },
|
|
"speed_support_interface": { "value": "speed_topbottom" },
|
|
|
|
"skirt_brim_speed": { "value": "speed_layer_0" },
|
|
|
|
"optimize_wall_printing_order": { "value": "True" },
|
|
|
|
"material_initial_print_temperature": { "value": "material_print_temperature + 10" },
|
|
"material_final_print_temperature": { "value": "material_print_temperature" },
|
|
"material_flow": { "value": 100 },
|
|
"travel_compensate_overlapping_walls_0_enabled": { "value": "False" },
|
|
|
|
"infill_sparse_density": { "value": 25 },
|
|
"infill_before_walls": { "value": false },
|
|
"infill_overlap": { "value": 15.0 },
|
|
|
|
|
|
"retraction_speed": { "value": 25, "maximum_value": 40 },
|
|
"retraction_retract_speed": { "maximum_value": 40 },
|
|
"retraction_prime_speed": { "maximum_value": 40 },
|
|
|
|
"retraction_hop_enabled": { "value": true },
|
|
"retraction_hop": { "value": 0.075 },
|
|
"retraction_hop_only_when_collides": { "value": true },
|
|
|
|
"retraction_combing": { "value": "'off'" },
|
|
"retraction_combing_max_distance": { "value": 30 },
|
|
"travel_avoid_other_parts": { "value": true },
|
|
"travel_avoid_supports": { "value": true },
|
|
"travel_retract_before_outer_wall": { "value": true },
|
|
|
|
"retraction_amount": { "value": 6 },
|
|
"retraction_enable": { "value": true },
|
|
"retraction_min_travel": { "value": 1.5 },
|
|
|
|
"cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
|
|
"cool_fan_speed": { "value": 70 },
|
|
"cool_fan_speed_0": { "value": 30 },
|
|
|
|
"cool_fan_enabled": { "value": true },
|
|
"cool_min_layer_time": { "value": 10 },
|
|
|
|
"adhesion_type": { "value": "'none' if support_enable else 'skirt'" },
|
|
"brim_replaces_support": { "value": false },
|
|
"skirt_gap": { "value": 5.0 },
|
|
"skirt_line_count": { "value": 4 },
|
|
|
|
"meshfix_maximum_deviation": { "value": 0.05 },
|
|
|
|
"support_angle": { "value": "math.floor(math.degrees(math.atan(line_width / 2.0 / layer_height)))" },
|
|
"support_pattern": { "value": "'zigzag'" },
|
|
"support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
|
|
"support_use_towers": { "value": false },
|
|
"support_xy_distance": { "value": "wall_line_width_0 * 2" },
|
|
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
|
"support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height * 2" },
|
|
"support_xy_overrides_z": { "value": "'xy_overrides_z'" },
|
|
"support_wall_count": { "value": 1 },
|
|
"support_brim_enable": { "value": true },
|
|
"support_brim_width": { "value": 4 },
|
|
|
|
"support_interface_enable": { "value": true },
|
|
"support_structure": { "value": "'tree'" },
|
|
"support_type": { "value": "'buildplate' if support_structure == 'tree' else 'everywhere'" },
|
|
"support_interface_height": { "value": "layer_height * 4" },
|
|
"support_interface_density": { "value": 33.333 },
|
|
"support_interface_pattern": { "value": "'grid'" },
|
|
"support_interface_skip_height": { "value": 0.2 },
|
|
"minimum_support_area": { "value": 2 },
|
|
"minimum_interface_area": { "value": 10 },
|
|
"top_bottom_thickness": { "value": "layer_height_0 + layer_height * math.floor(1.2 / layer_height)" },
|
|
"wall_thickness": { "value": "line_width * 3" }
|
|
}
|
|
}
|