mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-07 05:53:59 -06:00
b0ecb3ecdf
There have been some problems in the optimization of these profiles, so we undo this for now, preventing people from editing these materials and risking some warnings in Cura's interface, but providing the correct experience for people trying the new materials.
113 lines
3.7 KiB
INI
113 lines
3.7 KiB
INI
[general]
|
|
version = 2
|
|
name = Draft Print
|
|
definition = ultimaker3
|
|
|
|
[metadata]
|
|
type = quality
|
|
quality_type = draft
|
|
material = generic_pc_ultimaker3_AA_0.4
|
|
weight = -2
|
|
|
|
[values]
|
|
acceleration_enabled = True
|
|
acceleration_infill = =acceleration_print
|
|
acceleration_layer_0 = =acceleration_topbottom
|
|
acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
|
|
acceleration_print = 4000
|
|
acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
|
|
acceleration_support_infill = =acceleration_support
|
|
acceleration_support_interface = =acceleration_topbottom
|
|
acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
|
|
acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
|
|
acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
|
|
acceleration_wall_x = =acceleration_wall
|
|
adhesion_type = raft
|
|
brim_width = 20
|
|
cool_fan_full_at_height = =layer_height_0 + layer_height
|
|
cool_fan_speed = 0
|
|
cool_fan_speed_max = 90
|
|
cool_min_layer_time = 5
|
|
cool_min_layer_time_fan_speed_max = 5
|
|
cool_min_speed = 6
|
|
infill_line_width = =round(line_width * 0.4 / 0.35, 2)
|
|
infill_overlap = 0
|
|
infill_overlap_mm = 0.05
|
|
infill_pattern = triangles
|
|
infill_sparse_density = 20
|
|
infill_wipe_dist = 0.1
|
|
jerk_enabled = True
|
|
jerk_infill = =jerk_print
|
|
jerk_layer_0 = =jerk_topbottom
|
|
jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
|
|
jerk_print = 25
|
|
jerk_support = =math.ceil(jerk_print * 15 / 25)
|
|
jerk_support_infill = =jerk_support
|
|
jerk_support_interface = =jerk_topbottom
|
|
jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
|
|
jerk_wall = =math.ceil(jerk_print * 10 / 25)
|
|
jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
|
|
jerk_wall_x = =jerk_wall
|
|
layer_height = 0.2
|
|
layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
|
|
line_width = =machine_nozzle_size * 0.875
|
|
machine_min_cool_heat_time_window = 15
|
|
machine_nozzle_cool_down_speed = 0.85
|
|
machine_nozzle_heat_up_speed = 1.5
|
|
material_bed_temperature = 107
|
|
material_flow = 100
|
|
material_initial_print_temperature = =material_print_temperature - 5
|
|
material_final_print_temperature = =material_print_temperature - 10
|
|
material_print_temperature = =default_material_print_temperature + 10
|
|
material_standby_temperature = 100
|
|
multiple_mesh_overlap = 0
|
|
ooze_shield_angle = 40
|
|
ooze_shield_dist = 2
|
|
prime_tower_enable = True
|
|
prime_tower_size = 16
|
|
prime_tower_wipe_enabled = True
|
|
raft_airgap = 0.25
|
|
raft_margin = 15
|
|
retraction_amount = 8
|
|
retraction_count_max = 80
|
|
retraction_extrusion_window = 1
|
|
retraction_hop = 2
|
|
retraction_hop_enabled = True
|
|
retraction_hop_only_when_collides = True
|
|
retraction_min_travel = 0.8
|
|
retraction_prime_speed = 15
|
|
retraction_speed = 35
|
|
skin_overlap = 30
|
|
speed_infill = =speed_print
|
|
speed_layer_0 = 25
|
|
speed_prime_tower = =speed_topbottom
|
|
speed_print = 50
|
|
speed_support = =speed_wall_0
|
|
speed_support_interface = =speed_topbottom
|
|
speed_topbottom = 25
|
|
speed_travel = 250
|
|
speed_wall = =math.ceil(speed_print * 40 / 50)
|
|
speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
|
|
speed_wall_x = =speed_wall
|
|
support_angle = 60
|
|
support_bottom_distance = =support_z_distance
|
|
support_infill_rate = 15
|
|
support_pattern = zigzag
|
|
support_roof_density = 100
|
|
support_roof_enable = False
|
|
support_roof_line_distance = 0.4
|
|
support_roof_pattern = lines
|
|
support_top_distance = =support_z_distance
|
|
support_xy_distance = =wall_line_width_0 * 2.5
|
|
support_xy_distance_overhang = =wall_line_width_0
|
|
support_z_distance = =layer_height * 2
|
|
switch_extruder_prime_speed = 15
|
|
switch_extruder_retraction_amount = 20
|
|
switch_extruder_retraction_speeds = 35
|
|
top_bottom_thickness = 1.2
|
|
travel_avoid_distance = 3
|
|
travel_compensate_overlapping_walls_enabled = True
|
|
xy_offset = -0.15
|
|
wall_0_inset = 0
|
|
wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
|
|
wall_thickness = 1.2
|