mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-10 15:25:09 -06:00
4b4f971222
This should make it a bit easier for others to create a new definition since there is less for them to 'have to know'. Previously they would be required to fill in as category Other, but now they can just leave the category out.
83 lines
2.8 KiB
JSON
83 lines
2.8 KiB
JSON
{
|
|
"id": "PRi3",
|
|
"name": "ABAX PRi3",
|
|
"version": 2,
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "ABAX 3d Technologies",
|
|
"manufacturer": "ABAX 3d Technologies",
|
|
"file_formats": "text/x-gcode"
|
|
},
|
|
"overrides": {
|
|
"machine_start_gcode": {
|
|
"default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z5.0 F200 ;move Z to position 5.0 mm\nG92 E0 ;zero the extruded length\n; -- end of START GCODE --"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nM140 S0 ;set temp of bed to Zero \nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y215 ;move X to min and Y to max \nG90 ;set to absolute positioning\nM84 ;turn off steppers\n; -- end of END GCODE --"
|
|
},
|
|
"machine_width": {
|
|
"default_value": 225
|
|
},
|
|
"machine_depth": {
|
|
"default_value": 220
|
|
},
|
|
"machine_height": {
|
|
"default_value": 200
|
|
},
|
|
"machine_heated_bed": {
|
|
"default_value": false
|
|
},
|
|
"machine_center_is_zero": {
|
|
"default_value": false
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default_value": "RepRap"
|
|
},
|
|
"layer_height": {
|
|
"default_value": 0.2
|
|
},
|
|
"layer_height_0": {
|
|
"default_value": 0.2
|
|
},
|
|
"wall_thickness": {
|
|
"default_value": 1
|
|
},
|
|
"top_bottom_thickness": {
|
|
"default_value": 1
|
|
},
|
|
"bottom_thickness": {
|
|
"default_value": 1
|
|
},
|
|
"material_print_temperature": {
|
|
"default_value": 200
|
|
},
|
|
"material_bed_temperature": {
|
|
"default_value": 0
|
|
},
|
|
"material_diameter": {
|
|
"default_value": 1.75
|
|
},
|
|
"speed_print": {
|
|
"default_value": 40
|
|
},
|
|
"speed_infill": {
|
|
"default_value": 70
|
|
},
|
|
"speed_wall": {
|
|
"default_value": 25
|
|
},
|
|
"speed_topbottom": {
|
|
"default_value": 15
|
|
},
|
|
"speed_travel": {
|
|
"default_value": 150
|
|
},
|
|
"speed_layer_0": {
|
|
"default_value": 30
|
|
},
|
|
"support_enable": {
|
|
"default_value": true
|
|
}
|
|
}
|
|
}
|