mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-10 15:25:09 -06:00
2c331604e8
These were errors that were copy pasted from other definitions. So leaving them as is would continue to decrease the quality of third party profiles.
66 lines
3.9 KiB
JSON
66 lines
3.9 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Sovol-SV01",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "Sovol",
|
|
"manufacturer": "Sovol 3D",
|
|
"file_formats": "text/x-gcode",
|
|
"has_variants": false,
|
|
"has_machine_quality": false,
|
|
"preferred_quality_type": "draft",
|
|
"machine_extruder_trains": {
|
|
"0": "SV01_extruder_0"
|
|
}
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_name": { "default_value": "SV01" },
|
|
"machine_extruder_count": { "default_value": 1 },
|
|
"machine_width": { "default_value": 280 },
|
|
"machine_depth": { "default_value": 260 },
|
|
"machine_height": { "default_value": 300 },
|
|
"machine_max_feedrate_x": { "value": 500 },
|
|
"machine_max_feedrate_y": { "value": 500 },
|
|
"machine_max_feedrate_z": { "value": 10 },
|
|
"machine_max_feedrate_e": { "value": 50 },
|
|
"machine_max_acceleration_x": { "value": 500 },
|
|
"machine_max_acceleration_y": { "value": 500 },
|
|
"machine_max_acceleration_z": { "value": 100 },
|
|
"machine_max_acceleration_e": { "value": 5000 },
|
|
"machine_acceleration": { "value": 500 },
|
|
"machine_max_jerk_xy": { "value": 10 },
|
|
"machine_max_jerk_z": { "value": 0.4 },
|
|
"machine_max_jerk_e": { "value": 5 },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"material_diameter": { "default_value": 1.75 },
|
|
"acceleration_print": { "value": 500 },
|
|
"acceleration_travel": { "value": 500 },
|
|
"acceleration_travel_layer_0": { "value": "acceleration_travel" },
|
|
"acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
|
|
"jerk_print": { "value": 8 },
|
|
"jerk_travel": { "value": "jerk_print" },
|
|
"jerk_travel_layer_0": { "value": "jerk_travel" },
|
|
"acceleration_enabled": { "value": false },
|
|
"jerk_enabled": { "value": false },
|
|
"speed_print": { "value": 50.0 } ,
|
|
"skirt_brim_speed": { "value": "speed_layer_0" },
|
|
"optimize_wall_printing_order": { "value": "True" },
|
|
"material_initial_print_temperature": { "value": "material_print_temperature" },
|
|
"material_final_print_temperature": { "value": "material_print_temperature" },
|
|
"z_seam_type": { "value": "'back'" },
|
|
"z_seam_corner": { "value": "'z_seam_corner_weighted'" },
|
|
"infill_pattern": { "value": "'lines'" },
|
|
"infill_before_walls": { "value": false },
|
|
"infill_overlap": { "value": 30.0 },
|
|
"skin_overlap": { "value": 10.0 },
|
|
"infill_wipe_dist": { "value": 0.0 },
|
|
"wall_0_wipe_dist": { "value": 0.0 },
|
|
"retraction_amount": { "default_value": 3},
|
|
"retraction_speed": { "default_value": 50},
|
|
"adhesion_type": { "value": "'skirt'" },
|
|
"machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
|
|
"machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y240 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" }
|
|
}
|
|
}
|