mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-09 14:55:03 -06:00
2c331604e8
These were errors that were copy pasted from other definitions. So leaving them as is would continue to decrease the quality of third party profiles.
112 lines
5.1 KiB
JSON
112 lines
5.1 KiB
JSON
{
|
|
"name": "tank_m Base Printer",
|
|
"version": 2,
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": false,
|
|
"author": "tank_m",
|
|
"manufacturer": "tank_m",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "tank_m.obj",
|
|
"platform_texture": "tank_m.png",
|
|
|
|
"first_start_actions": [ "MachineSettingsAction" ],
|
|
"machine_extruder_trains": {"0": "tank_m_base_extruder_0"},
|
|
|
|
"has_materials": true,
|
|
"has_machine_quality": true,
|
|
|
|
|
|
"preferred_quality_type": "standard",
|
|
"preferred_material": "generic_pla"
|
|
},
|
|
|
|
|
|
"overrides": {
|
|
"machine_start_gcode": {
|
|
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Move to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nM117 Printing..."
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
|
},
|
|
|
|
"machine_max_feedrate_x": { "value": 500 },
|
|
"machine_max_feedrate_y": { "value": 500 },
|
|
"machine_max_feedrate_z": { "value": 50 },
|
|
"machine_max_feedrate_e": { "value": 500 },
|
|
|
|
"machine_max_acceleration_x": { "value": 2500 },
|
|
"machine_max_acceleration_y": { "value": 2500 },
|
|
"machine_max_acceleration_z": { "value": 100 },
|
|
"machine_max_acceleration_e": { "value": 2000 },
|
|
"machine_acceleration": { "value": 2500 },
|
|
|
|
"machine_heated_bed": { "default_value": true },
|
|
|
|
"material_diameter": { "default_value": 1.75 },
|
|
|
|
|
|
"acceleration_print": { "value": 2500 },
|
|
"acceleration_travel": { "value": 2500 },
|
|
|
|
|
|
"wall_thickness": {"value": "line_width * 2" },
|
|
|
|
"top_bottom_thickness": {"value": "layer_height_0 + layer_height * 3" },
|
|
|
|
"infill_sparse_density": { "value": "15" },
|
|
"infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
|
|
|
|
"material_print_temperature": { "value": "195" },
|
|
"material_initial_print_temperature": { "value": "material_print_temperature" },
|
|
"material_final_print_temperature": { "value": "material_print_temperature" },
|
|
"material_bed_temperature": { "value": "55" },
|
|
"material_bed_temperature_layer_0": { "value": "material_bed_temperature" },
|
|
"material_standby_temperature": { "value": "material_print_temperature" },
|
|
|
|
"speed_print": { "value": 50.0 } ,
|
|
"speed_wall_x": { "value": "speed_wall" },
|
|
"speed_travel": { "value": "120.0 if speed_print < 60 else 300.0 if speed_print > 100 else speed_print * 2.2" },
|
|
"speed_layer_0": { "value": 25.0 },
|
|
"speed_travel_layer_0": { "value": "100 if speed_layer_0 < 25 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
|
|
"speed_prime_tower": { "value": "speed_topbottom" },
|
|
"speed_support": { "value": "speed_wall_0" },
|
|
"speed_z_hop": { "value": 5 },
|
|
|
|
"retraction_amount": { "value": 1.0 },
|
|
"retraction_speed": { "value": 40 },
|
|
|
|
"cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
|
|
"cool_min_layer_time": { "value": 10 },
|
|
|
|
"support_brim_enable": { "value": true },
|
|
"support_angle": { "value": "math.floor(math.degrees(math.atan(line_width/2.0/layer_height)))" },
|
|
"support_pattern": { "value": "'zigzag'" },
|
|
"support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
|
|
"support_use_towers": { "value": false },
|
|
"support_xy_distance": { "value": "wall_line_width_0 * 2" },
|
|
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
|
"support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
|
|
"support_xy_overrides_z": { "value": "'xy_overrides_z'" },
|
|
"support_wall_count": { "value": 1 },
|
|
"support_brim_width": { "value": 4 },
|
|
|
|
"support_enable": { "value": true },
|
|
"support_interface_enable": { "value": true },
|
|
"support_interface_height": { "value": "layer_height * 4" },
|
|
"support_interface_density": { "value": 33.333 },
|
|
"support_interface_pattern": { "value": "'grid'" },
|
|
"support_interface_skip_height": { "value": 0.2 },
|
|
"minimum_support_area": { "value": 2 },
|
|
"minimum_interface_area": { "value": 10 },
|
|
|
|
"fill_outline_gaps": { "value": false },
|
|
|
|
"adhesion_type": { "value": "'skirt'" },
|
|
"brim_replaces_support": { "value": false },
|
|
"skirt_gap": { "value": 6.0 },
|
|
"skirt_line_count": { "value": 3 }
|
|
|
|
|
|
}
|
|
}
|