mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-09 06:45:09 -06:00
2c331604e8
These were errors that were copy pasted from other definitions. So leaving them as is would continue to decrease the quality of third party profiles.
157 lines
7.5 KiB
JSON
157 lines
7.5 KiB
JSON
{
|
|
"name": "Longer Base Printer",
|
|
"version": 2,
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": false,
|
|
"author": "Longer",
|
|
"manufacturer": "Longer",
|
|
"file_formats": "text/x-gcode",
|
|
"first_start_actions": ["MachineSettingsAction"],
|
|
|
|
"machine_extruder_trains": {
|
|
"0": "longer_base_extruder_0"
|
|
},
|
|
|
|
"has_materials": true,
|
|
"has_variants": true,
|
|
"has_machine_quality": true,
|
|
"variants_name": "Nozzle Size",
|
|
|
|
"preferred_variant_name": "0.4mm Nozzle",
|
|
"preferred_quality_type": "standard",
|
|
"preferred_material": "generic_pla"
|
|
|
|
},
|
|
"overrides": {
|
|
"machine_name": { "default_value": "LONGER Base Printer" },
|
|
"machine_start_gcode": { "default_value": "; LONGER Start G-code\nG21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM107 ; start with the fan off\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish\n" },
|
|
"machine_end_gcode": { "default_value": "; LONGER End G-code\nG91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z\n" },
|
|
|
|
"machine_max_feedrate_x": { "value": 500 },
|
|
"machine_max_feedrate_y": { "value": 500 },
|
|
"machine_max_feedrate_z": { "value": 10 },
|
|
"machine_max_feedrate_e": { "value": 50 },
|
|
|
|
"machine_max_acceleration_x": { "value": 500 },
|
|
"machine_max_acceleration_y": { "value": 500 },
|
|
"machine_max_acceleration_z": { "value": 100 },
|
|
"machine_max_acceleration_e": { "value": 5000 },
|
|
"machine_acceleration": { "value": 500 },
|
|
|
|
"machine_max_jerk_xy": { "value": 10 },
|
|
"machine_max_jerk_z": { "value": 0.4 },
|
|
"machine_max_jerk_e": { "value": 5 },
|
|
|
|
"machine_heated_bed": { "default_value": true },
|
|
|
|
"material_diameter": { "default_value": 1.75 },
|
|
|
|
"acceleration_print": { "value": 500 },
|
|
"acceleration_travel": { "value": 500 },
|
|
"acceleration_travel_layer_0": { "value": "acceleration_travel" },
|
|
"acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
|
|
|
|
"jerk_print": { "value": 8 },
|
|
"jerk_travel": { "value": "jerk_print" },
|
|
"jerk_travel_layer_0": { "value": "jerk_travel" },
|
|
|
|
"acceleration_enabled": { "value": false },
|
|
"jerk_enabled": { "value": false },
|
|
|
|
"speed_print": { "value": 50.0 } ,
|
|
"speed_wall_x": { "value": "speed_wall" },
|
|
"speed_roofing": { "value": "speed_topbottom" },
|
|
"speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
|
|
"speed_layer_0": { "value": 20.0 },
|
|
"speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
|
|
"speed_prime_tower": { "value": "speed_topbottom" },
|
|
"speed_support": { "value": "speed_wall_0" },
|
|
"speed_support_interface": { "value": "speed_topbottom" },
|
|
"speed_z_hop": { "value": 5 },
|
|
|
|
"skirt_brim_speed": { "value": "speed_layer_0" },
|
|
|
|
|
|
"optimize_wall_printing_order": { "value": "True" },
|
|
|
|
"material_initial_print_temperature": { "value": "material_print_temperature" },
|
|
"material_final_print_temperature": { "value": "material_print_temperature" },
|
|
|
|
"z_seam_type": { "value": "'back'" },
|
|
"z_seam_corner": { "value": "'z_seam_corner_weighted'" },
|
|
|
|
"infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
|
|
"infill_before_walls": { "value": false },
|
|
"infill_overlap": { "value": 30.0 },
|
|
"skin_overlap": { "value": 10.0 },
|
|
"infill_wipe_dist": { "value": 0.0 },
|
|
"wall_0_wipe_dist": { "value": 0.0 },
|
|
|
|
"fill_outline_gaps": { "value": false },
|
|
|
|
"retraction_amount": { "default_value": 5 },
|
|
"retraction_speed": {
|
|
"maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
|
|
"maximum_value": 200,
|
|
"default_value": 45
|
|
},
|
|
"retraction_retract_speed": {
|
|
"maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
|
|
"maximum_value": 200
|
|
},
|
|
"retraction_prime_speed": {
|
|
"maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
|
|
"maximum_value": 200
|
|
},
|
|
|
|
"retraction_hop": { "value": 0.2 },
|
|
"retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
|
|
"retraction_combing_max_distance": { "value": 30 },
|
|
"travel_avoid_other_parts": { "value": true },
|
|
"travel_avoid_supports": { "value": true },
|
|
"travel_retract_before_outer_wall": { "value": true },
|
|
|
|
|
|
"retraction_count_max": { "value": 100 },
|
|
"retraction_extrusion_window": { "value": 10 },
|
|
"retraction_min_travel": { "value": 1.5 },
|
|
|
|
"cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
|
|
"cool_min_layer_time": { "value": 10 },
|
|
|
|
"adhesion_type": { "value": "'raft'" },
|
|
"brim_replaces_support": { "value": false },
|
|
"skirt_gap": { "value": 10.0 },
|
|
"skirt_line_count": { "value": 3 },
|
|
|
|
"adaptive_layer_height_variation": { "value": 0.04 },
|
|
"adaptive_layer_height_variation_step": { "value": 0.04 },
|
|
|
|
"meshfix_maximum_resolution": { "value": "0.25" },
|
|
"meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
|
|
|
|
"support_angle": { "value": "math.floor(math.degrees(math.atan(line_width/2.0/layer_height)))" },
|
|
"support_pattern": { "value": "'zigzag'" },
|
|
"support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
|
|
"support_use_towers": { "value": false },
|
|
"support_xy_distance": { "value": "wall_line_width_0 * 2" },
|
|
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
|
"support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
|
|
"support_xy_overrides_z": { "value": "'xy_overrides_z'" },
|
|
"support_wall_count": { "value": 1 },
|
|
"support_brim_enable": { "value": true },
|
|
"support_brim_width": { "value": 4 },
|
|
|
|
"support_interface_enable": { "value": true },
|
|
"support_interface_height": { "value": "layer_height * 4" },
|
|
"support_interface_density": { "value": 33.333 },
|
|
"support_interface_pattern": { "value": "'grid'" },
|
|
"support_interface_skip_height": { "value": 0.2 },
|
|
"minimum_support_area": { "value": 2 },
|
|
"minimum_interface_area": { "value": 10 },
|
|
"top_bottom_thickness": {"value": "layer_height_0 + layer_height * 3" },
|
|
"wall_thickness": {"value": "line_width * 2" }
|
|
|
|
}
|
|
}
|