mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-09 23:05:01 -06:00
2c331604e8
These were errors that were copy pasted from other definitions. So leaving them as is would continue to decrease the quality of third party profiles.
62 lines
3.8 KiB
JSON
62 lines
3.8 KiB
JSON
{
|
|
"name": "Lotmaxx SC-10",
|
|
"version": 2,
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "lotmaxx.com",
|
|
"manufacturer": "Lotmaxx",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "lotmaxx_sc_10_20_platform.3mf",
|
|
"has_materials": true,
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "lotmaxx_sc10_extruder_0"
|
|
}
|
|
},
|
|
"overrides":
|
|
{
|
|
"machine_name": { "default_value": "Lotmaxx SC-10" },
|
|
"machine_width": { "default_value": 235 },
|
|
"machine_depth": { "default_value": 235 },
|
|
"machine_height": { "default_value": 320 },
|
|
"machine_head_with_fans_polygon": { "default_value": [[-32,11],[-32,-32],[28,-32],[28,11]] },
|
|
"gantry_height": { "value": 40 },
|
|
"machine_start_gcode": { "default_value": "; SC-10 Custom Start G-code\nG28 ; Home all axes\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n; End of custom start GCode" },
|
|
"machine_end_gcode": { "default_value": "; SC-10 Custom End G-code\nG4 ; Wait\nM220 S100 ; Reset Speed factor override percentage to default (100%)\nM221 S100 ; Reset Extrude factor override percentage to default (100%)\nG91 ; Set coordinates to relative\nG1 F1800 E-3 ; Retract filament 3 mm to prevent oozing\nG1 F3000 Z20 ; Move Z Axis up 20 mm to allow filament ooze freely\nG90 ; Set coordinates to absolute\nG1 X0 Y{machine_depth} F1000 ; Move Heat Bed to the front for easy print removal\nM84 ; Disable stepper motors\n; End of custom end GCode" },
|
|
"machine_max_jerk_xy":{ "value": 10 },
|
|
"machine_max_jerk_z":{ "value": 0.4 },
|
|
"machine_max_jerk_e":{ "value": 5 },
|
|
"machine_heated_bed":{ "default_value": true },
|
|
"material_diameter":{ "default_value": 1.75 },
|
|
"jerk_print":{ "value": 8 },
|
|
"jerk_travel":{ "value": "jerk_print" },
|
|
"jerk_travel_layer_0":{ "value":" jerk_travel" },
|
|
"acceleration_enabled":{ "value": false },
|
|
"jerk_enabled":{ "value": false },
|
|
"speed_print":{ "value": 60.0 },
|
|
"speed_infill":{ "value": "speed_print * 2" },
|
|
"speed_wall_0":{ "value": "speed_wall" },
|
|
"speed_wall_x":{ "value": "speed_wall" },
|
|
"speed_roofing":{ "value": "speed_topbottom" },
|
|
"speed_travel":{ "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
|
|
"speed_layer_0":{ "value": 20.0 },
|
|
"speed_travel_layer_0":{ "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
|
|
"speed_prime_tower":{ "value": "speed_topbottom" },
|
|
"speed_support":{ "value": "speed_wall_0" },
|
|
"speed_support_interface":{ "value": "speed_topbottom" },
|
|
"skirt_brim_speed":{ "value": "speed_layer_0" },
|
|
"retraction_enable":{ "value": true },
|
|
"retraction_count_max":{ "value": 100 },
|
|
"retraction_extrusion_window":{ "value": 10 },
|
|
"retraction_min_travel":{ "value": 1.5 },
|
|
"cool_fan_full_at_height":{ "value": "layer_height_0 + 2 * layer_height" },
|
|
"cool_fan_enabled":{ "value": true },
|
|
"cool_min_layer_time":{ "value": 10 },
|
|
"meshfix_maximum_resolution":{ "value": "0.25" },
|
|
"meshfix_maximum_travel_resolution":{ "value": "meshfix_maximum_resolution" },
|
|
"adhesion_type": { "value": "'none' if support_enable else 'skirt'" },
|
|
"skirt_gap":{ "value": 5.0 },
|
|
"skirt_line_count":{ "value": 4 }
|
|
}
|
|
}
|