mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-10 15:25:09 -06:00
ae50a047f5
The test `test_validateOverridingDefaultValue` pointed out that some default values are ineffective. This commit removes these default values.
100 lines
No EOL
4.2 KiB
JSON
100 lines
No EOL
4.2 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "ELEGOO NEPTUNE 4",
|
|
"inherits": "elegoo_base",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "mastercaution"
|
|
},
|
|
"overrides":
|
|
{
|
|
"acceleration_layer_0": { "value": 3000 },
|
|
"acceleration_print": { "value": 3000 },
|
|
"acceleration_travel": { "value": 5000 },
|
|
"cool_fan_full_layer": { "value": 2 },
|
|
"infill_line_width": { "value": "line_width + 0.05" },
|
|
"infill_overlap": { "value": "0 if infill_sparse_density < 40.01 and infill_pattern != 'concentric' else -5" },
|
|
"initial_layer_line_width_factor": { "value": "100.0 if resolveOrValue('adhesion_type') == 'raft' else 125 if line_width < 0.5 else 110" },
|
|
"machine_acceleration": { "value": 3000 },
|
|
"machine_depth": { "default_value": 230 },
|
|
"machine_end_gcode": { "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z2 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"value": [
|
|
[-40, 50],
|
|
[-40, -30],
|
|
[40, 50],
|
|
[40, -30]
|
|
]
|
|
},
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_height": { "default_value": 270 },
|
|
"machine_max_acceleration_e": { "value": 5000 },
|
|
"machine_max_acceleration_x": { "value": 5000 },
|
|
"machine_max_acceleration_y": { "value": 5000 },
|
|
"machine_name": { "default_value": "ELEGOO NEPTUNE 4" },
|
|
"machine_nozzle_cool_down_speed": { "value": 0.75 },
|
|
"machine_nozzle_heat_up_speed": { "value": 1.6 },
|
|
"machine_start_gcode": { "default_value": "G28 ;home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X1.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X1.1 Y80.0 Z0.28 F1500.0 E10 ;Draw the first line\nG1 X1.4 Y80.0 Z0.28 F5000.0 ;Move to side a little\nG1 X1.4 Y20 Z0.28 F1500.0 E20 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up" },
|
|
"machine_width": { "default_value": 235 },
|
|
"retraction_amount": { "default_value": 0.5 },
|
|
"retraction_count_max": { "value": 80 },
|
|
"retraction_speed": { "default_value": 45 },
|
|
"skirt_brim_speed": { "maximum_value_warning": "500" },
|
|
"speed_infill":
|
|
{
|
|
"maximum_value_warning": "500",
|
|
"value": "speed_print"
|
|
},
|
|
"speed_layer_0":
|
|
{
|
|
"maximum_value_warning": "500",
|
|
"value": 60
|
|
},
|
|
"speed_prime_tower": { "maximum_value_warning": "500" },
|
|
"speed_print":
|
|
{
|
|
"default_value": 250,
|
|
"maximum_value_warning": "500"
|
|
},
|
|
"speed_print_layer_0": { "maximum_value_warning": "500" },
|
|
"speed_roofing": { "maximum_value_warning": "500" },
|
|
"speed_support": { "maximum_value_warning": "500" },
|
|
"speed_support_bottom": { "maximum_value_warning": "500" },
|
|
"speed_support_infill": { "maximum_value_warning": "500" },
|
|
"speed_support_interface": { "maximum_value_warning": "500" },
|
|
"speed_support_roof": { "maximum_value_warning": "500" },
|
|
"speed_topbottom":
|
|
{
|
|
"maximum_value_warning": "500",
|
|
"value": "speed_wall"
|
|
},
|
|
"speed_travel":
|
|
{
|
|
"maximum_value_warning": "500",
|
|
"value": "speed_print"
|
|
},
|
|
"speed_travel_layer_0":
|
|
{
|
|
"maximum_value_warning": "500",
|
|
"value": "speed_layer_0*2"
|
|
},
|
|
"speed_wall":
|
|
{
|
|
"maximum_value_warning": "500",
|
|
"value": "speed_print / 2"
|
|
},
|
|
"speed_wall_0":
|
|
{
|
|
"maximum_value_warning": "500",
|
|
"value": "speed_wall"
|
|
},
|
|
"speed_wall_x":
|
|
{
|
|
"maximum_value_warning": "500",
|
|
"value": "speed_wall + (speed_wall / 2)"
|
|
}
|
|
}
|
|
} |