Ghostkeeper 672fc58930 Allow down to half the layer height for infill layer thickness ... This is possible because CuraEngine rounds these to the nearest layer thickness. So if it's more than half the layer height it gets rounded up and it's still properly one layer. Contributes to issue #6465.		2019-10-02 12:59:48 +02:00
..
3dator.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
101Hero.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
abax_pri3.def.json	CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json	2018-06-12 13:39:29 +02:00
abax_pri5.def.json	CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json	2018-06-12 13:39:29 +02:00
abax_titan.def.json	CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json	2018-06-12 13:39:29 +02:00
alfawise_u20.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
alfawise_u30.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
alya3dp.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
alyanx3dp.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
anet_a6.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:38:36 +02:00
anycubic_4max.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
anycubic_chiron.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
anycubic_i3_mega.def.json	Add sideways move to not squash the primed amount onto the nozzle	2019-10-02 11:44:24 +02:00
bfb.def.json	CURA-5334 Remove machine nozzle size from machine definitions and move	2018-07-04 12:00:38 +02:00
bibo2_dual.def.json	Set BIBO print speed to 40mm/s	2019-09-26 19:26:10 -06:00
bq_hephestos.def.json	Move hardcoded firmware-file table to definitions	2018-08-02 11:50:28 +02:00
bq_hephestos_2.def.json	bq Hephestos2: Getting a rid of custom g-code	2018-08-25 14:46:21 +02:00
bq_hephestos_xl.def.json	CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json	2018-06-12 13:39:29 +02:00
bq_witbox.def.json	Move hardcoded firmware-file table to definitions	2018-08-02 11:50:28 +02:00
bq_witbox_2.def.json	CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json	2018-06-12 13:39:29 +02:00
builder_premium_large.def.json	Show prime blob by default	2019-06-06 12:31:06 +02:00
builder_premium_medium.def.json	Show prime blob by default	2019-06-06 12:31:06 +02:00
builder_premium_small.def.json	Show prime blob by default	2019-06-06 12:31:06 +02:00
cartesio.def.json	Remove has_machine_materials and has_variant_materials	2019-08-07 10:44:02 +02:00
cocoon_create_modelmaker.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
creality_base.def.json	Apply proposed Creality changes	2019-09-03 09:48:01 +02:00
creality_cr-x.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
creality_cr10.def.json	Make base Creality profile invisible (but the rest visible)	2019-07-02 12:00:24 +02:00
creality_cr10max.def.json	make Ender-5 Plus and CR-10 Max visible	2019-08-28 15:04:17 +02:00
creality_cr10mini.def.json	Make base Creality profile invisible (but the rest visible)	2019-07-02 12:00:24 +02:00
creality_cr10s.def.json	Make base Creality profile invisible (but the rest visible)	2019-07-02 12:00:24 +02:00
creality_cr10s4.def.json	Make base Creality profile invisible (but the rest visible)	2019-07-02 12:00:24 +02:00
creality_cr10s5.def.json	Make base Creality profile invisible (but the rest visible)	2019-07-02 12:00:24 +02:00
creality_cr10spro.def.json	Rename creawsome to creality	2019-07-02 11:48:23 +02:00
creality_cr20.def.json	Make base Creality profile invisible (but the rest visible)	2019-07-02 12:00:24 +02:00
creality_cr20pro.def.json	Make base Creality profile invisible (but the rest visible)	2019-07-02 12:00:24 +02:00
creality_ender2.def.json	Make base Creality profile invisible (but the rest visible)	2019-07-02 12:00:24 +02:00
creality_ender3.def.json	Reduce size of print head without fans for one-at-a-time mode	2019-09-09 17:37:01 +02:00
creality_ender4.def.json	Make base Creality profile invisible (but the rest visible)	2019-07-02 12:00:24 +02:00
creality_ender5.def.json	fix ender purge line going out of bed	2019-07-02 19:39:20 +02:00
creality_ender5plus.def.json	make Ender-5 Plus and CR-10 Max visible	2019-08-28 15:04:17 +02:00
creatable_d3.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
cubicon_3dp_110f.def.json	Add check for platform mesh & texture	2019-02-15 14:42:50 +01:00
cubicon_3dp_210f.def.json	Add check for platform mesh & texture	2019-02-15 14:42:50 +01:00
cubicon_3dp_310f.def.json	Add check for platform mesh & texture	2019-02-15 14:42:50 +01:00
cubicon_common.def.json	4904 cubicon device (#4963)	2019-01-22 16:44:04 +01:00
cubicon_dual_pro_a30.def.json	Add Cubicon plus A15 and A30	2019-09-12 14:05:13 +02:00
cubicon_style_plus_a15.def.json	Add Cubicon plus A15 and A30	2019-09-12 14:05:13 +02:00
custom.def.json	Rename Custom FDM Printer to Custom FFF printer	2018-07-11 13:30:27 +02:00
dagoma_discoeasy200.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
dagoma_magis.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
dagoma_neva.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
delta_go.def.json	Add check for platform mesh & texture	2019-02-15 14:42:50 +01:00
deltabot.def.json	Mark DeltaBot as a custom printer	2019-07-08 10:27:06 +02:00
deltacomb.def.json	Remove has_machine_materials and has_variant_materials	2019-08-07 10:44:02 +02:00
easyarts_ares.def.json	Make corrections to manufacturer fields	2019-07-03 11:27:19 +02:00
erzay3d.def.json	Fixed the value of "retraction_amount"	2019-06-21 11:53:06 +03:00
fabtotum.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
fdmextruder.def.json	Update setting_version	2019-09-24 11:19:03 +02:00
fdmprinter.def.json	Allow down to half the layer height for infill layer thickness	2019-10-02 12:59:48 +02:00
felixpro2dual.def.json	Remove Felix' platform texture	2019-08-05 10:35:55 +02:00
felixtec4dual.def.json	Fix indentation and remove spaces	2019-02-24 19:01:13 +01:00
flsun_qq.def.json	Correction for build volume.	2019-09-15 09:56:21 -07:00
flsun_qq_s.def.json	Update flsun_qq_s.def.json	2019-06-24 13:22:18 +02:00
folgertech_FT-5.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
geeetech_a30.def.json	Added upgrader for 4.3	2019-07-23 11:15:13 +02:00
gmax15plus.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
gmax15plus_dual.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
grr_neo.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
hellbot_adonis.def.json	Fix whitespace	2019-09-26 10:33:44 +02:00
hellbot_magna_dual.def.json	Fix dual extrusion for Magna Dual	2019-09-26 11:14:01 +02:00
hellbot_magna_I.def.json	Fix whitespace	2019-09-26 10:33:44 +02:00
helloBEEprusa.def.json	CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json	2018-06-12 13:39:29 +02:00
hms434.def.json	HMS434 update and material exclusion	2019-09-25 10:23:20 +02:00
imade3d_jellybox.def.json	Remove has_machine_materials and has_variant_materials	2019-08-07 10:44:02 +02:00
imade3d_jellybox_2.def.json	Remove has_machine_materials and has_variant_materials	2019-08-07 10:44:02 +02:00
imade3d_jellybox_root.def.json	Update the JellyBOX definitions	2019-07-17 01:42:35 +02:00
innovo_inventor.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
jgaurora_a1.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
jgaurora_a3s.def.json	Add JGAurora A3S (#6235)	2019-08-26 10:34:58 +02:00
jgaurora_a5.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
jgaurora_jgmaker_magic.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
jgaurora_z_603s.def.json	Align comment with the rest	2019-09-30 17:30:12 +02:00
julia.def.json	CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json	2018-06-12 13:39:29 +02:00
kemiq_q2_beta.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
kemiq_q2_gama.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
kossel_mini.def.json	Make corrections to manufacturer fields	2019-07-03 11:27:19 +02:00
kossel_pro.def.json	Make corrections to manufacturer fields	2019-07-03 11:27:19 +02:00
kupido.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
makeit_pro_l.def.json	Fill in manufacturers previously set to unknown/'not applicable'.	2019-07-04 14:39:28 +02:00
makeit_pro_m.def.json	Fill in manufacturers previously set to unknown/'not applicable'.	2019-07-04 14:39:28 +02:00
makeR_pegasus.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
makeR_prusa_tairona_i3.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
maker_starter.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
makerbotreplicator.def.json	Let Makerbot Replicator use Replicator's X3G variant	2018-10-15 01:30:36 +02:00
malyan_m180.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
malyan_m200.def.json	Remove references to start_layers_at_same_position	2019-07-26 17:26:40 +02:00
mankati_fullscale_xt_plus.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
Mark2_for_Ultimaker2.def.json	Remove unused definition ID field	2019-09-17 13:10:25 +02:00
mendel90.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
monoprice_select_mini_v1.def.json	Add extruder definition for all single-extrusion machines	2018-06-08 17:05:31 +02:00
monoprice_select_mini_v2.def.json	Fix start g-code of Monoprice Select Mini v2	2018-07-24 09:09:26 +02:00
monoprice_ultimate.def.json	Fix manufacturer of Monoprice Ultimate	2019-08-05 10:43:49 +02:00
nwa3d_a5.def.json	Remove has_machine_materials and has_variant_materials	2019-08-07 10:44:02 +02:00
nwa3d_a31.def.json	Remove has_machine_materials and has_variant_materials	2019-08-07 10:44:02 +02:00
ord.def.json	CURA-5334 Remove machine nozzle size from machine definitions and move	2018-07-04 12:00:38 +02:00
peopoly_moai.def.json	Remove the max-z-speed-override	2019-07-03 16:13:21 +02:00
printrbot_play.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
printrbot_play_heated.def.json	Add check for platform mesh & texture	2019-02-15 14:42:50 +01:00
printrbot_simple.def.json	Update printrbot_simple.def.json	2019-09-02 22:20:20 +03:00
printrbot_simple_extended.def.json	Update printrbot_simple_extended.def.json	2019-09-02 22:14:24 +03:00
printrbot_simple_makers_kit.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
prusa_i3.def.json	Make corrections to manufacturer fields	2019-07-03 11:27:19 +02:00
prusa_i3_mk2.def.json	Make corrections to manufacturer fields	2019-07-03 11:27:19 +02:00
prusa_i3_xl.def.json	Make corrections to manufacturer fields	2019-07-03 11:27:19 +02:00
punchtec_connect_xl.def.json	CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json	2018-06-12 13:39:29 +02:00
raise3D_N2_dual.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
raise3D_N2_plus_dual.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
raise3D_N2_plus_single.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
raise3D_N2_single.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
renkforce_rf100.def.json	Set default infill density for tree support to 0% in profiles	2019-04-29 12:06:54 +02:00
rigid3d.def.json	CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json	2018-06-12 13:39:29 +02:00
rigid3d_3rdgen.def.json	CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json	2018-06-12 13:39:29 +02:00
rigid3d_hobby.def.json	CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json	2018-06-12 13:39:29 +02:00
rigid3d_mucit.def.json	CURA-5334 Remove machine nozzle size from machine definitions and move	2018-07-04 12:00:38 +02:00
rigid3d_zero.def.json	CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json	2018-06-12 13:39:29 +02:00
rigid3d_zero2.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
rigidbot.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
rigidbot_big.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
robo_3d_r1.def.json	CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json	2018-06-12 13:39:29 +02:00
seemecnc_artemis.def.json	Remove unused and incorrect "icon" metadata from definitions	2018-10-05 15:57:30 +02:00
seemecnc_v32.def.json	Remove unused and incorrect "icon" metadata from definitions	2018-10-05 15:57:30 +02:00
stereotech_start.def.json	Make corrections to manufacturer fields	2019-07-03 11:27:19 +02:00
stereotech_ste320.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:38:36 +02:00
strateo3d.def.json	Remove has_machine_materials and has_variant_materials	2019-08-07 10:44:02 +02:00
structur3d_discov3ry1_complete_um2plus.def.json	Remove has_machine_materials and has_variant_materials	2019-08-07 10:44:02 +02:00
tam.def.json	Rename machines with too long names	2019-07-10 13:02:14 +02:00
tevo_blackwidow.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
tevo_tarantula.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
tevo_tornado.def.json	Reduce travel jerk/acceleration and reduce print jerk slightly	2019-06-14 11:50:58 +02:00
tizyx_evy.def.json	Remove has_machine_materials and has_variant_materials	2019-08-07 10:44:02 +02:00
tizyx_evy_dual.def.json	Remove has_machine_materials and has_variant_materials	2019-08-07 10:44:02 +02:00
tizyx_k25.def.json	update profiles, qualities, variants... of TiZYX printers	2019-06-28 08:21:59 -07:00
ubuild-3d_mr_bot_280.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
ultimaker.def.json	Don't show Silicone for UM printers that are incompatible with it anyway	2019-03-05 15:36:31 +01:00
ultimaker2.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
ultimaker2_extended.def.json	Merge branch 'feature_add_printer_layout' of https://github.com/fieldOfView/Cura	2018-10-31 14:23:42 +01:00
ultimaker2_extended_plus.def.json	Remove UpgradeFirmware as supported machine action...	2018-10-03 21:00:23 +02:00
ultimaker2_go.def.json	Merge branch 'feature_add_printer_layout' of https://github.com/fieldOfView/Cura	2018-10-31 14:23:42 +01:00
ultimaker2_plus.def.json	Remove has_machine_materials and has_variant_materials	2019-08-07 10:44:02 +02:00
ultimaker3.def.json	Add bom_numbers field to definitions	2019-09-06 16:03:26 +02:00
ultimaker3_extended.def.json	Add bom_numbers field to definitions	2019-09-06 16:03:26 +02:00
ultimaker_original.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
ultimaker_original_dual.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
ultimaker_original_plus.def.json	WIP: Remove UMOCheckup MachineAction	2019-03-19 15:47:49 +01:00
ultimaker_s3.def.json	Add bom_numbers field to definitions	2019-09-06 16:03:26 +02:00
ultimaker_s5.def.json	Add bom_numbers field to definitions	2019-09-06 16:03:26 +02:00
uni_print_3d.def.json	Added test for definition container	2018-11-23 17:01:05 +01:00
uniqbot_one.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
vertex_delta_k8800.def.json	Make corrections to manufacturer fields	2019-07-03 11:27:19 +02:00
vertex_k8400.def.json	Make corrections to manufacturer fields	2019-07-03 11:27:19 +02:00
vertex_k8400_dual.def.json	Make corrections to manufacturer fields	2019-07-03 11:27:19 +02:00
vertex_nano_k8600.def.json	Added Vertex Nano K8600 profile (#5998)	2019-07-19 10:42:01 +02:00
wanhao_d4s.def.json	Updated to reference speed_travel macro	2018-11-02 09:39:12 -04:00
wanhao_d6.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
wanhao_d6_plus.def.json	Updated to reference speed_travel macro	2018-11-02 09:39:12 -04:00
wanhao_d9.def.json	Replace travel_speed with speed_travel	2019-03-05 17:43:00 +01:00
wanhao_duplicator5S.def.json	Updated to reference speed_travel macro	2018-11-02 09:39:12 -04:00
wanhao_duplicator5Smini.def.json	Updated to reference speed_travel macro	2018-11-02 09:39:12 -04:00
wanhao_i3.def.json	Updated to reference speed_travel macro	2018-11-02 09:39:12 -04:00
wanhao_i3mini.def.json	Updated to reference speed_travel macro	2018-11-02 09:39:12 -04:00
wanhao_i3plus.def.json	Updated to reference speed_travel macro	2018-11-02 09:39:12 -04:00
winbo_dragonl4.def.json	Show prime blob by default	2019-06-06 12:31:06 +02:00
winbo_mini2.def.json	Show prime blob by default	2019-06-06 12:31:06 +02:00
winbo_superhelper105.def.json	Show prime blob by default	2019-06-06 12:31:06 +02:00
winbo_superhelper155.def.json	Create winbo_superhelper155.def.json	2018-07-24 17:15:07 +08:00
z-bolt_classic.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
z-bolt_plus.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00
zone3d_printer.def.json	Fill in manufacturers previously set to unknown/'not applicable'.	2019-07-04 14:39:28 +02:00
zyyx_agile.def.json	Overwrite gantry height value instead of default_value	2019-05-13 09:30:32 +02:00