3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2026-02-16 01:19:37 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 6
Cura/resources/variants
History
Steinar H. Gunderson 1ca58824ac Add printer definitions for Sovol SV08. 
The SV08 (or SV-08; nomenclature is not completely consistent)
is a relatively new printed based on Voron 2.4, running Klipper.
This adds printer, extruder and material definitions for it,
based on the voron2_base definitions (by copying, so as to stay
independent of voron2_base is changed) plus Sovol's published
profiles for Orca Slicer:

  https://drive.google.com/drive/folders/1KWjLxwpO_9_Xqi_f6qu84HRxZi26a_GN

Unfortunately, the included STL model for the platform does not have
texture coordinates, so we cannot use the platform texture (unless someone
goes to add them manually or otherwise adjusts the model).

The following settings were not carried over, mostly because I could not
find any obvious equivalent in Cura:

  - Machine:
    "retract_before_wipe": [ "0%" ],
    "machine_max_acceleration_extruding": [ "20000" ],
    "machine_max_acceleration_retracting": [ "5000" ],
    "retract_length_toolchange": [ "2" ],
    "wipe_distance": [ "2" ],
    "retract_lift_below": [ "343" ],
    "thumbnails_format": "PNG",
    "before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",

  - Filament (using ABS as an example; the exact values differ between
    the four material profiles):
    "nozzle_temperature_range_low": [ "190" ],
    "nozzle_temperature_range_high": [ "250" ],
    "overhang_fan_threshold": [ "25%" ],
    "temperature_vitrification": [ "60" ],  # Only used for arranging.
    "close_fan_the_first_x_layers": [ "3" ],
    "full_fan_speed_layer": [ "0" ],  # Inconsistent; effectively 4.
    # Enclosure fan (M106 P3 commands)
    "activate_air_filtration": [ "1" ],
    "complete_print_exhaust_fan_speed": [ "60" ],
    "during_print_exhaust_fan_speed": [ "100" ],

  - Process: A bunch (e.g. bridge_flow, elephant_foot_compensation,
    overhang_1_4_speed, etc. etc.), but it's unclear how many are
    printer-specific and how many are just Orca defaults where Cura wants
    to do things differently.

The start and end G-code are mostly copied over verbatim, except that it
leaves the printer in relative coordinate mode and Cura does not set this
explicitly back to absolute, so we need an explicit G90 at the end. (Also,
there seems to be a Klipper issue where G90 does not reset extrusion to
absolute as well, so we need to send an explicit M82.) We give
EXTRUDER_TEMP= and BED_TEMP= as parameters to the START_PRINT macro; the
Sovol stock macros ignore these, but the popular mainline Klipper
installation can use this to e.g. bed mesh at the correct temperature.
We also use the new Cura 5.8 conditionals to reduce the extrusion amount
for finer nozzles than 0.4mm, as we get Klipper errors otherwise.

Unfortunately, Cura chooses SS_ as prefix instead of SV08_. I don't know
if there is a way to override this; the other Sovol printers seem to have
the same issue.

I've tested this with the standard 0.4mm nozzle and ABS/PLA, using the
Moonraker plugin. PETG and TPU are untested, in part because the current
nozzle is said to be unsafe for PETG. The time estimates from Cura are not
all that good, but klipper_estimator helps. (The Klipper object exclusion
plugin is also recommended, as it allows the printer to bed mesh a smaller
area.)

Future work would include supporting the 0.2mm, 0.6mm and 0.8mm nozzles.
There are separate profiles for them, with different layer height, support
settings, print speeds, etc. -- and then there is a specific PLA/0.2mm
profile with lower printing speed and higher fan settings. Also, it would
be really good to support the enclosure fan (M106 P3, known as
exhaust_fan in Orca) for printing ABS; it's possible that something could
be done using the Cura fan control plugin, but it would be better to
simply have it right in the filament settings. Similarly, the ABS/PETG
profiles want to turn off the fan entirely the first three layers
(to improve adhesion), but Cura can only ramp linearly starting from the
first layer, not hold the first few layers constant.
2025-06-22 23:14:23 +02:00
..
arjun Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
artillery Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
atmat Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
bambu Limit extruders for MVP 2025-05-02 10:09:02 +02:00
biqu Update settings version 2025-06-12 16:10:13 +02:00
blocks Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
cartesio Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
crazy3dprint Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
creality Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
dagoma Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
deltacomb Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
diy Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
draftshift Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
dxu Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
elegoo Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
fabtotum Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
farm2 Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
felix Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
flashforge Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
flyingbear Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
fusion3 Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
geeetech_variants Update Geeetech 3D printer profiles 2025-06-07 17:01:31 +08:00
gmax Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
goofoo Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
hms434 Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
imade3d Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
kingroon Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
kosher Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
leapfrog Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
liquid Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
lnl3d Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
longer Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
mark2 Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
mingda Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
modix Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
multicomp Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
nwa3d Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ratrig Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
renkforce Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
sovol Add printer definitions for Sovol SV08. 2025-06-22 23:14:23 +02:00
strateo3d Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
structur3d Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
tizyx Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
tronxy Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
two_trees Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
uni Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
vivedino Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
voron Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
vzbot Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
weedo Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
xyz_printing Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
zav Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
zyyx Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_olsson_0.4.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_olsson_0.6.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_olsson_0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_olsson_0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_plus_0.4.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_plus_0.6.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_plus_0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_extended_plus_0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_olsson_0.4.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_olsson_0.6.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_olsson_0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_olsson_0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_0.4.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_0.6.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_connect_0.4.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_connect_0.6.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_connect_0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker2_plus_connect_0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_aa0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_aa0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_aa04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_bb0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_bb04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_extended_aa0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_extended_aa0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_extended_aa04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_extended_bb0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker3_extended_bb04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_aa0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_aa0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_aa04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_bb0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_bb04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_cc04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_cc06.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_dd04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_factor4_ht06.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_method_1A.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_method_1C.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_method_2A.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_method_LABS.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodx_1A.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodx_1C.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodx_1XA.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodx_2A.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodx_2XA.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodx_LABS.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodxl_1A.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodxl_1C.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodxl_1XA.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodxl_2A.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodxl_2XA.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_methodxl_LABS.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_replicator_smart_extruder_plus.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_replicator_smart_extruder_plus_im-pla.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_replicator_smart_extruder_plus_labs.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s3_aa0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s3_aa0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s3_aa04.inst.cfg Add machine_nozzle_size to variants 2025-03-31 12:59:43 +02:00
ultimaker_s3_bb0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s3_bb04.inst.cfg Add machine_nozzle_size to variants 2025-03-31 12:59:43 +02:00
ultimaker_s3_cc04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s3_cc06.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s3_dd04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_aa0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_aa0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_aa04.inst.cfg Add machine_nozzle_size to variants 2025-03-31 12:59:43 +02:00
ultimaker_s5_aluminum.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_bb0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_bb04.inst.cfg Add machine_nozzle_size to variants 2025-03-31 12:59:43 +02:00
ultimaker_s5_cc04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_cc06.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_dd04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s5_glass.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s6_aa_plus04.inst.cfg New configurations for the S line printers. 2025-04-04 12:02:58 +02:00
ultimaker_s6_bb04.inst.cfg [PP-605] Add missing machine_nozzle_size to S6 BB04 2025-06-17 13:29:29 +02:00
ultimaker_s6_cc_plus04.inst.cfg New configurations for the S line printers. 2025-04-04 12:02:58 +02:00
ultimaker_s6_dd04.inst.cfg New configurations for the S line printers. 2025-04-04 12:02:58 +02:00
ultimaker_s7_aa0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s7_aa0.25.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s7_aa04.inst.cfg Add machine_nozzle_size to variants 2025-03-31 12:59:43 +02:00
ultimaker_s7_bb0.8.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s7_bb04.inst.cfg Add machine_nozzle_size to variants 2025-03-31 12:59:43 +02:00
ultimaker_s7_cc04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s7_cc06.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s7_dd04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s8_aa_plus04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s8_bb04.inst.cfg Add machine_nozzle_size to variants 2025-03-31 12:59:43 +02:00
ultimaker_s8_cc_plus04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_s8_dd04.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_sketch_0.4mm.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_sketch_large_0.4mm.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00
ultimaker_sketch_sprint_0.4mm.inst.cfg Upgrade the in-files settings-version to 25 (for Cura 5.9 -> 5.10). 2025-02-26 10:57:55 +01:00