mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-07 05:53:59 -06:00
e49316d1b9
Some of them ended up as 15 because that's the default in the Ultimaker 3. This was done correctly by the profile optimiser because this setting was not specified by the original profiles, but it should've been 20 for all AA 0.8mm profiles. Contributes to issue CURA-3650.
65 lines
1.8 KiB
INI
65 lines
1.8 KiB
INI
[general]
|
|
name = AA 0.8
|
|
version = 2
|
|
definition = ultimaker3_extended
|
|
|
|
[metadata]
|
|
author = ultimaker
|
|
type = variant
|
|
|
|
[values]
|
|
acceleration_enabled = True
|
|
acceleration_print = 4000
|
|
brim_width = 7
|
|
cool_fan_speed = 7
|
|
cool_fan_speed_max = 100
|
|
cool_min_speed = 5
|
|
default_material_print_temperature = 200
|
|
infill_before_walls = False
|
|
infill_line_width = =round(line_width * 0.6 / 0.7, 2)
|
|
infill_overlap = 0
|
|
infill_pattern = triangles
|
|
infill_wipe_dist = 0
|
|
jerk_enabled = True
|
|
jerk_print = 25
|
|
jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
|
|
jerk_wall = =math.ceil(jerk_print * 25 / 25)
|
|
jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
|
|
layer_height = 0.2
|
|
line_width = =machine_nozzle_size
|
|
machine_min_cool_heat_time_window = 15
|
|
machine_nozzle_cool_down_speed = 0.85
|
|
machine_nozzle_heat_up_speed = 1.5
|
|
machine_nozzle_size = 0.8
|
|
material_final_print_temperature = =material_print_temperature - 10
|
|
material_initial_print_temperature = =material_print_temperature - 5
|
|
material_standby_temperature = 100
|
|
multiple_mesh_overlap = 0
|
|
prime_tower_enable = False
|
|
prime_tower_size = 16
|
|
prime_tower_wipe_enabled = True
|
|
retract_at_layer_change = True
|
|
retraction_amount = 6.5
|
|
retraction_count_max = 25
|
|
retraction_extrusion_window = 1
|
|
retraction_hop = 2
|
|
retraction_hop_enabled = True
|
|
retraction_hop_only_when_collides = True
|
|
skin_overlap = 5
|
|
speed_equalize_flow_enabled = True
|
|
speed_layer_0 = 20
|
|
speed_print = 35
|
|
speed_topbottom = =math.ceil(speed_print * 25 / 35)
|
|
speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
|
|
support_angle = 60
|
|
support_bottom_distance = =support_z_distance / 2
|
|
support_pattern = zigzag
|
|
support_top_distance = =support_z_distance
|
|
support_z_distance = =layer_height * 2
|
|
switch_extruder_prime_speed = 20
|
|
switch_extruder_retraction_amount = 16.5
|
|
top_bottom_thickness = 1.4
|
|
travel_avoid_distance = 3
|
|
wall_0_inset = 0
|
|
wall_line_width_x = =wall_line_width
|
|
wall_thickness = 2
|