mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-06 21:44:01 -06:00
ac23c9df22
These are much smaller than their STL counterparts. This saves on download and installation time. Maybe also on loading time.
65 lines
No EOL
2.6 KiB
JSON
65 lines
No EOL
2.6 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "BQ Witbox",
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "BQ",
|
|
"manufacturer": "BQ",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "bq_witbox_platform.3mf",
|
|
"platform_offset": [ 0, -145, -38],
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "bq_witbox_extruder_0"
|
|
},
|
|
"firmware_file": "MarlinWitbox.hex"
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_name": { "default_value": "BQ Witbox" },
|
|
"machine_start_gcode": {
|
|
"default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z15.0 F1200 ;move Z to position 15.0 mm\nG92 E0 ;zero the extruded length\nG1 E20 F200 ;extrude 20mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F7200 ;set feedrate to 120 mm/s\n; -- end of START GCODE --"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nG91 ;set to relative positioning\nG1 E-20 F300 ;retract the filament a bit to release some of the pressure\nG90 ;set to absolute positioning\nG1 Z200 ;move the platform to the bottom\nG28 X0 Y0 ;move to the X/Y origin (Home)\nM84 ;turn off steppers\n; -- end of END GCODE --"
|
|
},
|
|
"machine_width": {
|
|
"default_value": 297
|
|
},
|
|
"machine_depth": {
|
|
"default_value": 210
|
|
},
|
|
"machine_height": {
|
|
"default_value": 200
|
|
},
|
|
"machine_heated_bed": {
|
|
"default_value": false
|
|
},
|
|
"machine_center_is_zero": {
|
|
"default_value": false
|
|
},
|
|
"machine_gcode_flavor": {
|
|
"default_value": "RepRap (Marlin/Sprinter)"
|
|
},
|
|
"layer_height": {
|
|
"default_value": 0.2
|
|
},
|
|
"layer_height_0": {
|
|
"default_value": 0.2
|
|
},
|
|
"wall_thickness": {
|
|
"value": "1"
|
|
},
|
|
"top_bottom_thickness": {
|
|
"default_value": 1
|
|
},
|
|
"speed_print": {
|
|
"default_value": 40
|
|
},
|
|
"support_enable": {
|
|
"default_value": true
|
|
}
|
|
|
|
}
|
|
} |