mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-10 07:15:03 -06:00
5ef569d8ce
CURA-12255 Also applied some consistency between labels, so that they are more consistent and more printers get their variants name translated.
90 lines
No EOL
4.4 KiB
JSON
90 lines
No EOL
4.4 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Discov3ry Complete",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "Andrew Finkle, CTO",
|
|
"manufacturer": "Structur3d.io",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "ultimaker2_platform.obj",
|
|
"firmware_file": "MarlinUltimaker2plus.hex",
|
|
"first_start_actions": [],
|
|
"has_machine_quality": false,
|
|
"has_materials": true,
|
|
"has_variants": true,
|
|
"machine_extruder_trains": { "0": "structur3d_discov3ry1_complete_um2plus_extruder_0" },
|
|
"platform_offset": [
|
|
0,
|
|
0,
|
|
0
|
|
],
|
|
"platform_texture": "Ultimaker2Plusbackplate.png",
|
|
"preferred_material": "structur3d_dap100silicone",
|
|
"preferred_quality_type": "extra_fast",
|
|
"preferred_variant_name": "0.84mm (Green)",
|
|
"supported_actions": [],
|
|
"variants_name": "Print Core"
|
|
},
|
|
"overrides":
|
|
{
|
|
"adhesion_type": { "default_value": "skirt" },
|
|
"gantry_height": { "value": "52" },
|
|
"infill_sparse_density": { "value": 100 },
|
|
"layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
|
|
"line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },
|
|
"machine_depth": { "default_value": 205 },
|
|
"machine_disallowed_areas":
|
|
{
|
|
"default_value": [
|
|
[
|
|
[-115, 112.5],
|
|
[-78, 112.5],
|
|
[-80, 102.5],
|
|
[-115, 102.5]
|
|
],
|
|
[
|
|
[115, 112.5],
|
|
[115, 102.5],
|
|
[105, 102.5],
|
|
[103, 112.5]
|
|
],
|
|
[
|
|
[-115, -112.5],
|
|
[-115, -104.5],
|
|
[-84, -104.5],
|
|
[-82, -112.5]
|
|
],
|
|
[
|
|
[115, -112.5],
|
|
[108, -112.5],
|
|
[110, -104.5],
|
|
[115, -104.5]
|
|
]
|
|
]
|
|
},
|
|
"machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off \nM140 S0 ;heated bed heater off (if you have it) \nM92 E282 ;reset extruder EEPROM steps/mm for plastic filament \nG91 ;relative positioning \nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure \nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more \nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way \nM84 ;steppers off\nG90 ;absolute positioning" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[-44, 14],
|
|
[-44, -34],
|
|
[64, 14],
|
|
[64, -34]
|
|
]
|
|
},
|
|
"machine_heat_zone_length": { "default_value": 20 },
|
|
"machine_height": { "default_value": 205 },
|
|
"machine_name": { "default_value": "Discov3ry Complete (Ultimaker 2+)" },
|
|
"machine_show_variants": { "default_value": true },
|
|
"machine_start_gcode": { "default_value": "\n;Updated Firmware (.hex and Marlin .ino) for \n;Ultimaker 2+ with Discov3ry Extruder available at: \n;https://github.com/Structur3d/UM2.1Discov3ry-Firmware-beta \n;**Learn more at https://www.structur3d.io** \n \nM104 S{material_print_temperature} ;Start heating extruder \nM140 S{material_bed_temperature} ;Start heating bed \nG21 ;metric values \nG90 ;absolute positioning \nM82 ;set extruder to absolute mode \nM107 ;start with the fan off \nM302 ;allow cold extrusion \nM92 E2589 ;set extruder EEPROM steps/mm for paste \nG28 Z0 ;move Z to bottom endstops \nG28 X0 Y0 ;move X/Y to endstops \nG1 X15 Y0 F4000 ;move X/Y to front of printer \nG1 Z15.0 F9000 ;move the platform to 15mm \nG92 E0 ;zero the extruded length \nG1 F200 E10 ;extrude 10 mm of feed stock \nG92 E0 ;zero the extruded length again \nG1 F9000 \n;Put printing message on LCD screen \nM117 Printing..." },
|
|
"machine_width": { "default_value": 205 },
|
|
"retraction_hop_enabled": { "value": true },
|
|
"skirt_brim_minimal_length": { "value": 1500 },
|
|
"speed_print": { "value": 15 },
|
|
"speed_support": { "value": "speed_wall_0" },
|
|
"speed_wall_x": { "value": "speed_wall" }
|
|
}
|
|
} |