[general]
version = 2
name = Fast Print
definition = ultimaker3

[metadata]
type = quality
quality_type = fast
material = generic_cpe_ultimaker3_AA_0.4
weight = -1

[values]
acceleration_enabled = True
acceleration_infill = =acceleration_print
acceleration_layer_0 = =acceleration_topbottom
acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_print = 4000
acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_support_infill = =acceleration_support
acceleration_support_interface = =acceleration_topbottom
acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
acceleration_wall_x = =acceleration_wall
adhesion_type = brim
brim_width = 7
cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
cool_fan_speed = 50
cool_fan_speed_max = 100
cool_min_layer_time = 5
cool_min_speed = 7
infill_line_width = =round(line_width * 0.5 / 0.35, 2)
infill_pattern = triangles
infill_sparse_density = 20
infill_wipe_dist = 0
jerk_enabled = True
jerk_infill = =jerk_print
jerk_layer_0 = =jerk_topbottom
jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
jerk_print = 25
jerk_support = =math.ceil(jerk_print * 15 / 25)
jerk_support_infill = =jerk_support
jerk_support_interface = =jerk_topbottom
jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
jerk_wall = =math.ceil(jerk_print * 10 / 25)
jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
jerk_wall_x = =jerk_wall
layer_height = 0.15
layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
line_width = =machine_nozzle_size * 0.875
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.9
machine_nozzle_heat_up_speed = 1.4
material_bed_temperature = 70
material_print_temperature = 245
material_standby_temperature = 100
multiple_mesh_overlap = 0
ooze_shield_angle = 60
ooze_shield_enabled = False
prime_tower_enable = True
prime_tower_size = 17
prime_tower_wipe_enabled = True
raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
raft_speed = =speed_print / 60 * 30
raft_interface_speed = =raft_speed * 0.75
raft_base_speed = =0.75 * raft_speed
raft_acceleration = =acceleration_print
raft_jerk = =jerk_print
retraction_count_max = 25
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
skin_overlap = 15
speed_infill = =speed_print
speed_layer_0 = 20
speed_prime_tower = =speed_topbottom
speed_print = 60
speed_support = =speed_wall_0
speed_support_interface = =speed_topbottom
speed_topbottom = =math.ceil(speed_print * 30 / 60)
speed_travel = 250
speed_wall = =math.ceil(speed_print * 40 / 60)
speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
speed_wall_x = =speed_wall
support_angle = 60
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance
support_xy_distance = =wall_line_width_0 * 2.5
support_xy_distance_overhang = =wall_line_width_0
support_z_distance = =layer_height * 2
top_bottom_thickness = 1.2
travel_avoid_distance = 3
travel_compensate_overlapping_walls_enabled = True
wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
wall_thickness = 1.3
support_line_width = =line_width
support_pattern = zigzag
support_infill_rate = 15
support_join_distance = 2
support_offset = 0.2
support_interface_enable = False
support_use_towers = True
raft_margin = 15
raft_airgap = 0.3
raft_surface_layers = 2
raft_surface_thickness = =resolveOrValue('layer_height')
raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
raft_interface_line_width = =line_width * 2
raft_interface_line_spacing = =raft_interface_line_width + 0.2
support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
retraction_amount = 6.5

cool_min_layer_time_fan_speed_max = 10
infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
ooze_shield_dist = 2
retraction_extra_prime_amount = 0
retraction_min_travel = =line_width * 2
retraction_prime_speed = =retraction_speed
retraction_speed = 25
support_bottom_stair_step_height = 0.3
switch_extruder_prime_speed = =switch_extruder_retraction_speeds
switch_extruder_retraction_amount = =machine_heat_zone_length
switch_extruder_retraction_speeds = 20