{
    "id": "hephestos_xl",
    "version": 1, 
    "name": "BQ Prusa i3 Hephestos XL",
    "manufacturer": "BQ",
    "author": "other",
    "platform": "hephestos_platform.stl",
    "inherits": "fdmprinter.json",

    "machine_settings": {
        "machine_start_gcode": {
            "default": "; -- START GCODE --\n;Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z15.0 F1200          ;move Z to position 15.0 mm\nG92 E0                  ;zero the extruded length\nG1 E20 F200             ;extrude 20mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F7200                ;set feedrate to 120 mm/sec\n; -- end of START GCODE --"
        },
        "machine_end_gcode": {
            "default": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nG91                     ;set to relative positioning\nG1 E-20 F300            ;retract the filament a bit to release some of the pressure\nG1 Z10                  ;move extruder up 10 mm\nG90                     ;set to absolute positioning\nG1 X0 Y180 F1200        ;expose the platform\nM84                     ;turn off steppers\n; -- end of END GCODE --"
        },
        "machine_width": {
            "default": 200
        },
        "machine_depth": {
            "default": 300
        },
        "machine_height": {
            "default": 180
        },
        "machine_heated_bed": {
            "default": false
        },
        "machine_center_is_zero": {
            "default": false
        },
        "machine_gcode_flavor": {
            "default": "RepRap"
        },
        "machine_platform_offset": {
            "default": [0.0, 100.0, 0.0]
        }
    },
    "categories": {
        "layer_height": {
            "settings": {
                "layer_height": {
                    "default": 0.2
                },
                "layer_height_0": {
                    "default": 0.2,
                    "visible": true
                }
            }
        },
        "shell": {
            "settings": {
                "shell_thickness": {
                    "default": 1.2,
                    "children": {
                        "wall_thickness": {
                            "default": 1.2,
                            "visible": false
                        },
                        "top_bottom_thickness": {
                            "default": 0.8,
                            "visible": false,
                            "children": {
                                "bottom_thickness": {
                                    "default": 0.4,
                                    "visible": false
                                }
                            }
                        }
                    }
                }
            }
        },
        "material": {
            "settings": {
                "material_print_temperature": {
                    "default": 220,
                    "visible": true
                },
                "material_bed_temperature": {
                    "default": 0,
                    "visible": false
                },
                "material_diameter": {
                    "default": 1.75,
                    "visible": true
                }
            }
        },
        "speed": {
            "settings": {
                "speed_print": {
                    "default": 40.0,
                    "children": {
                        "speed_infill": {
                            "default": 40.0,
                            "visible": false
                        },
                        "speed_wall": {
                            "default":35.0,
                            "visible": false,
                            "children": {
                                "speed_wall_0": {
                                    "default": 35.0,
                                    "visible": false
                                },
                                "speed_wall_x": {
                                    "default": 35.0,
                                    "visible": false
                                }
                            }
                        },
                        "speed_topbottom": {
                            "default": 35.0,
                            "visible": false
                        },
                        "speed_support": {
                            "default": 35.0,
                            "visible": false
                        }
                    }
                },
                "speed_travel": {
                    "default": 110.0
                },
                "speed_layer_0": {
                    "default": 20.0,
                    "visible": false
                }
            }
        },
        "travel": {
            "settings": {
                "retraction_speed": {
                    "default": 30.0,
                    "visible": true,
                    "children": {
                        "retraction_retract_speed": {
                            "default": 30.0,
                            "visible": true
                        },
                        "retraction_prime_speed": {
                            "default": 30.0,
                            "visible": true
                        }
                    }
                },
                "retraction_amount": {
                    "default": 2.0,
                    "visible": true
                },
                "retraction_hop": {
                    "default": 0.75,
                    "visible": false
                }
            }
        },
        "platform_adhesion": {
            "settings": {
                "skirt_minimal_length": {
                    "default": 150
                },
                "raft_base_line_width": {
                    "default": 0.7
                },
                "raft_interface_thickness": {
                    "default": 0.2
                }
            }
        },
        "support": {
            "settings": {
                "support_enable": {
                    "default": true
                },
                "support_z_distance": {
                    "default": 0.2,
                    "visible": false
                },
                "support_fill_rate": {
                    "default": 10,
                    "visible": false
                }
            }
        }
    }
}