Ghostkeeper
5ef7fe56be
Remove unnecessary override of expansion angle to 45 degrees
...
Found in #6823 .
2019-12-19 09:58:42 +01:00
Ghostkeeper
4a5673746c
Remove unused default_value overrides
...
These are overrides of default_value while there is a value defined. As such these overrides had no effect at all.
Changing them to value can actually change the behaviour of the profile. That is not what the profile author has apparently tested with, so I'm not doing that. I'm just removing the unused data.
In the future if we get new definitions the author gets notified of the error so that he may test more effectively. The legacy can't be fixed without re-testing, so I'm leaving that to the authors.
Done during Turbo Testing & Tooling. I want to go home for the weekend now...
2019-10-18 18:38:16 +02:00
Ghostkeeper
e26e825d83
Overwrite gantry height value instead of default_value
...
Because the default in fdmprinter has a formula in the value, the default_value properties wouldn't get used any more.
2019-05-13 09:30:32 +02:00
Ghostkeeper
25bbc1e66e
Set default infill density for tree support to 0% in profiles
...
In profiles that overwrite the support infill density, also keep it 0% for tree support.
Except PVA profiles. Those are probably better off with their normal infill density.
Fixes #5297 .
2019-04-29 12:06:54 +02:00
fieldOfView
7c68829fcd
Remove unused and incorrect "icon" metadata from definitions
...
The "icon" metadata is not used, and in all cases points to non-existing files anyway.
2018-10-05 15:57:30 +02:00
Diego Prado Gesto
5b251fc6dc
CURA-5334 Remove machine nozzle size from machine definitions and move
...
it to extruder definitions.
2018-07-04 12:00:38 +02:00
Lipu Fei
aba3795d0b
Add extruder definition for all single-extrusion machines
...
CURA-5334
All changed printers:
- 101Hero
- 3dator
- abax_pri3
- abax_pri5
- abax_titan
- alya3dp
- anycubic_i3_mega
- bfb
- bq_hephestos
- bq_hephestos_2
- bq_hephestos_xl
- bq_witbox
- bq_witbox_2
- creality_cr10
- creality_cr10s4
- creality_cr10s5
- dagoma_discoeasy200
- dagoma_neva
- delta_go
- deltabot
- deltacomb
- easyarts_ares
- fabtotum
- folgertech_FT-5
- gmax15plus
- grr_neo
- imade3d_jellybox
- innovo_inventor
- julia
- kemiq_q2_beta
- kemiq_q2_gama
- kossel_mini
- kossel_pro
- kupido
- makeR_pegasus
- makeR_prusa_tairona_i3
- maker_starter
- makerbotreplicator
- malyan_m180
- malyan_m200
- mankati_fullscale_xt_plus
- mendel90
- monoprice_select_mini_v1
- monoprice_select_mini_v2
- peopoly_moai
- printrbot_play
- printrbot_play_heated
- printrbot_simple
- printrbot_simple_extended
- printrbot_simple_makers_kit
- prusa_i3
- prusa_i3_mk2
- prusa_i3_xl
- raise3D_N2_plus_single
- raise3D_N2_single
- renkforce_rf100
- rigid3d
- rigid3d_3rdgen
- rigid3d_hobby
- rigid3d_mucit
- rigid3d_zero
- rigid3d_zero2
- rigidbot
- rigidbot_big
- robo_3d_r1
- seemecnc_artemis
- seemecnc_v32
- tam
- tevo_blackwidow
- tevo_tarantula
- ubuild-3d_mr_bot_280
- ultimaker2
- ultimaker2_extended
- ultimaker2_extended_plus
- ultimaker2_go
- ultimaker2_plus
- ultimaker_original
- ultimaker_original_plus
- uniqbot_one
- vertex_delta_k8800
- vertex_k8400
- zone3d_printer
- zyyx_agile
2018-06-08 17:05:31 +02:00
Jack Ha
60a21b3d7d
3DMaker Starter definition: Set the preferred quality to draft (0.2mm) and remove default layer_height so normal profile is back to 0.1. CURA-5217
2018-05-16 09:42:34 +02:00
Ghostkeeper
202f7f87f8
Remove ID from definition files
...
Sometimes it's out of sync. Sometimes even missing. Let's just not use that any more.
Contributes to issue CURA-4243.
2017-11-02 12:53:06 +01:00
Ghostkeeper
4b4f971222
Make 'other' the default category
...
This should make it a bit easier for others to create a new definition since there is less for them to 'have to know'. Previously they would be required to fill in as category Other, but now they can just leave the category out.
2017-08-25 09:17:55 +02:00
Ghostkeeper
c0d96a1d79
Remove heat/cool speeds that are equal to default
...
The default value for both of these settings in fdmprinter is 2.
2017-08-09 09:46:22 +02:00
Ghostkeeper
6f355d9006
Make 3DMaker Starter visible again
...
For some reason it was made invisible in 4e3e466a11
2017-05-10 12:01:59 +02:00
Tim Kuipers
6564ada60d
JSON bugfix: prusa i3 had wrong adhesion setting (CURA-2410)
2016-10-03 14:42:14 +02:00
Tim Kuipers
14cd1395eb
JSON fix: gcode favlour became an enum (CURA-2304)
2016-09-19 13:41:23 +02:00
Tim Kuipers
9cd6a8c1ae
JSON feat: machine_name as a setting for the 3D printer model type (CURA-2360)
2016-09-13 16:44:55 +02:00
Ghostkeeper
557e52e514
Update outdated setting name
...
This setting name was changed, but apparently not everywhere.
2016-09-08 13:06:03 +02:00
Ghostkeeper
cb4c1fd08c
Rename skirt_speed to skirt_brim_speed
...
Also updated the description. Because this concerns not only the skirt, but also the brim.
Contributes to issue CURA-1678.
2016-07-22 16:45:11 +02:00
Ghostkeeper
afb7a45bb0
Translate ancient machine_nozzle_gantry_distance setting
...
It was changed to gantry_height long ago but not updated in these definitions.
Contributes to issue CURA-1278.
2016-05-18 11:48:43 +02:00
Ghostkeeper
a8fc830f2b
Translate ancient machine_head_shape settings
...
It has been machine_head_polygon for a while.
Contributes to issue CURA-1278.
2016-05-18 11:36:45 +02:00
Ghostkeeper
4e3e466a11
Move platform offset to metadata
...
Also removed the setting from fdmprinter just to be clear.
Contributes to issue CURA-1278.
2016-05-18 10:34:28 +02:00
Jaime van Kessel
51e57b1f91
Added visibility meta data
...
CURA-1278
2016-05-18 09:44:53 +02:00
Ghostkeeper
da03eab355
Use default value rather than 'default'
...
Default is outdated.
Contributes to issue CURA-1278.
2016-05-17 17:46:29 +02:00
Ghostkeeper
e13878b343
Translate definition for 3DMaker Starter
...
Contributes to issue CURA-1278.
2016-05-17 17:46:29 +02:00
