See issue Ultimaker/CuraEngine#240
The intent of this change it to allow token replacement in start/end
gcode similar to the old Cura. Tokens are of the form
{material_bed_temperature} where the name is any setting name that is
passed to the engine.
Control the backend's generation of temperature commands via new
settings material_bed_temp_prepend and material_print_temp_prepend based
on whether there are temperature tokens in the printer profile's start
gcode.
This change will generate the same temperature gcode as FffGcodeWriter
at the head, if none of the temperature tokens are present in the
machine profile. Otherwise, they're suppressed via the prepend settings.
Also, set fdmprinter.json so that all that inherit from it default to
having the gcode temperature prepend also wait for temperature. Profiles
can override these settings: material_bed_temp_wait and
material_print_temp_wait
This PR intends to change both Cura and CuraEngine. However, it is safe
to sequence with the Cura change first which will do token replacement
(if present), but will fail to supress the temperature prepends.
* 15.10: (39 commits)
Remove unused import in StartSliceJob
conforming to code style
fix typo's..
Adjust initial view to be slightly from the side
uses a different method to check whether a machine name excists
Sets the languageComboBox to the default language
Remove per-group settings for now
Make sure to send all settings when an object overrides the profile
Properly emit writeStarted in RemovableDriveOutputDevice
Add xy_offset setting to list of settings that trigger a disallowed area update
Properly trigger a reslice when the active instance is changed
Wizardpages without hack
Only hides the window when there are no more pages
Only add layer data node after all processing
Also account for "xy_offset" setting for the disallowed areas
JSON: workaround for stutter in spiralize vase: set travel speed to printing speed
Adds a color for the error-messages
Shows an error message when a user tries to add a printer with a name that already excists.
JSON: support bottom stair step height defaults changed so that the bottom distance to the model isn't violated too much
Try to use Protobuf CPP implementation if it is available
...
Previously the minimum layer height was 0.1 micron. This was rounded down to 0 microns in the engine, and then a check would cause the engine to return an error. 1 micron is the minimum that the engine can handle.
* 15.10:
Remove full screen from menu and disable the shortcut key
Properly default infill_sparse_thickness to layer_height`
Changes the color of the 'C' in one iconfile
moves the changelog from on-startup to the extensions menu
Fix firmware update to properly report progress
Use a decorator to track Z offset
Remove infill_sparse_combine setting
Update for BQ printers profiles
Bump version
Properly position groups and nodes once ungrouped
In discussion, we deemed infill_sparse_thickness more clear to the user and infill_sparse_combine superfluous, since it is really an intermediary value used by the engine to round the thickness up. So now it is actually computed in the engine. Accompanying this commit will be a commit to CuraEngine to remove the setting from the .json file.
* 15.10: (37 commits)
Tweak the initial camera position
Never disable the view button
Use selection status to disable/enable tools rather than platform activity
JSON: bugfix: skirt_speed was the only child of speed_layer_0, which meant you couldnt tweak them separately
Fix Windows build
Move all contributed profiles to an "Other" manufacturer
Bump version
Make the Infill buttons and support checkboxes in Simple mode functional
Fix the variants menu so the variants actually get added
Try to add a page when the name of a wizard page is unknown
Catch any exception that happens while trying to eject
Set High Quality to 0.08 layer height
Capture stdout and stderr on Windows to prevent py2exe messages
Add missing Ulti and Low quality profiles
JSON: bugfix/feat: wall_line_width defaults to nozzle size and wall_line_count computed properly
When you click [Manage Printers..] it brings you to the right page
Delay showing the Add Machine dialog until after the main window is properly shown
Adds a smaller cross icon
Use the job name for saving files
Update RemovableDrive and USB output devices to use the new file_name parameter
...
