Ghostkeeper
a0ae7489f8
Less technical term for X/Y offset of infill
...
Just in the description. It's good to describe a setting using different words than the setting name.
Contributes to issue CURA-4601.
2017-11-24 13:16:14 +01:00
Ghostkeeper
9ecfd5510a
Clarify description for when bed temperature is 0
...
Fixes #2674 .
2017-11-24 10:42:09 +01:00
Lipu Fei
6b132a13de
Merge pull request #2786 from 0r31/discoeasy200_profile
...
Improve discoeasy200 profile
2017-11-23 00:25:07 +01:00
Jack Ha
0a2a9a2589
CURA-4533 added setting 'Filter out tiny gaps'
2017-11-22 09:42:03 +01:00
Lipu Fei
b439581e2d
Merge pull request #2816 from Ultimaker/CURA-4104
...
CURA-4104 added settings for flow rate compensated extrusion
2017-11-20 15:27:56 +01:00
Aleksei S
9337cc8a7f
Merge branch '3.1' into print_simulation_view
2017-11-20 14:32:22 +01:00
Mark
c1733dd908
Update fdmprinter.def.json
2017-11-20 14:19:58 +01:00
Jack Ha
12bee471eb
CURA-4104 added settings for flow rate compensated extrusion
2017-11-20 14:06:03 +01:00
Ghostkeeper
a5a15df08d
Add setting to set the maximum mesh resolution
...
Implements issue CURA-4590.
2017-11-20 13:41:28 +01:00
Ghostkeeper
2974c4d7ab
Merge branch 'cura/Cura/master' of https://github.com/maukcc/Cura into maukcc-cura/Cura/master
2017-11-20 13:04:34 +01:00
orel Windows
565574a183
Replace the print temperature setting used in gstart code as layer 0 print temperature seems more relevant.
2017-11-20 10:59:57 +01:00
orel Windows
05b4689bd6
Improve discoeasy200 profile, especially the machine gcode start as it uses 'print_temperature' which is an invalid Cura setting.
2017-11-20 10:40:25 +01:00
ChrisTerBeke
f48539cc93
Merge pull request #2685 from Ultimaker/container_stack_improvements
...
Container stack improvements
2017-11-17 13:09:54 +01:00
Ghostkeeper
f27494d60a
Move ironing into shell category
...
It is no longer considered experimental.
2017-11-17 10:59:14 +01:00
Ghostkeeper
15a50511b7
Don't crash if support density is 0
...
Found while working on CURA-4523.
2017-11-17 10:57:23 +01:00
Ruben D
8dd91519a6
Move Support Chunk Size out of children of skip_some_zags
...
The rule is that leaf settings are the ones that are used by the engine. The support_skip_some_zags setting is used by the engine.
2017-11-15 00:54:08 +01:00
MaukCC
b081b686a8
Merge branch 'master' into cura/Cura/master
2017-11-14 11:59:35 +01:00
MaukCC
38882c6d13
Update cartesio.def.json
2017-11-14 10:53:51 +01:00
maukcc
ef2d9b0468
Cartesio profiles
...
updated prime tower
update PC profiles
2017-11-14 10:30:10 +01:00
Ruben D
6d05c320a8
Remove disfunctional initial layer z offset settings
...
The pull request for the engine wasn't merged. It looks like the pull request for the front-end settings wasn't merged either, but here they are. They shouldn't be here.
Fixes #2744 .
2017-11-11 17:51:33 +01:00
ChrisTerBeke
88cf40e2d7
Merge branch 'master' into container_stack_improvements
2017-11-10 14:35:13 +01:00
Lipu Fei
637d1a1da3
Fix Vertex Delta K8800 definition file
2017-11-09 10:37:51 +01:00
Lipu Fei
b0144c7f10
Merge pull request #2740 from kaleidoscopeit/master
...
New machine definition : Deltacomb 3D
2017-11-09 10:33:53 +01:00
Lipu Fei
183c63f765
Merge pull request #2720 from Ultimaker/Update_Infill_Patern_Description
...
Add_tri-hexagon_and_cross_to_pattern_description
2017-11-09 08:14:35 +01:00
Brecht Nuyttens
873862efd7
Fixed Vertex Delta Definition
2017-11-07 16:54:18 +01:00
kaleidoscopeit
5008d63cfe
New machine definition : Deltacomb 3D
2017-11-06 10:01:57 +01:00
ChrisTerBeke
d32b7f0091
Merge branch 'master' into container_stack_improvements
2017-11-06 09:49:44 +01:00
Ruben D
0d71443bd2
Move 'Remove Empty First Layers' setting to mesh fixes category
...
It used to be in 'support' since it's something you may want to decide on depending on whether you have support or not. It could also go in 'Special Modes', but I think this is more specified.
2017-11-05 23:24:07 +01:00
Andreea Scorojitu
1d5d8c5ac0
Add_tri-hexagon_and_cross_to_pattern_description
2017-11-03 15:02:03 +01:00
Diego Prado Gesto
a4441e2bdb
CURA-4481 Setting description improved
2017-11-02 13:20:25 +01:00
ChrisTerBeke
743285f426
Merge branch 'master' into container_stack_improvements
2017-11-01 12:32:37 +01:00
alekseisasin
fb87b73bbe
Merge pull request #2591 from BagelOrb/trihex_infill
...
trihex infill
2017-10-31 17:25:31 +01:00
ChrisTerBeke
4701518404
Add default position to fdm extruder definition - CURA-4482
2017-10-31 10:23:30 +01:00
Chris ter Beke
9806ec7374
Resolve merge conflicts with master - CURA-4482
2017-10-31 09:22:03 +01:00
ChrisTerBeke
d718e6e36c
Create extruder stack for single extruder machines on start - CURA-4482
2017-10-31 09:08:20 +01:00
Ruben D
93e746b1b3
Warm up to layer_0 temperatures in start g-code
...
Thanks to nounours2099 for the correction.
Fixes #2631 .
2017-10-31 00:23:05 +01:00
alekseisasin
e8bd404904
Merge pull request #2584 from Builder3D/master
...
Add Builder Premium
2017-10-27 10:25:11 +02:00
Ghostkeeper
73e809b956
Remove specialised start g-code from Creality CR-10
...
By request from Michael.
This makes it the same as the start g-code for the Custom FDM Printer, which apparently works better.
2017-10-25 13:20:05 +02:00
Diego Prado Gesto
7404df66ac
CURA-4481 Disable "Remove empty layers" when support is enabled.
...
When support is enabled then it doesn't matter if the user choose
whether to remove or not the empty layers, because it's done after
generating supports. In order to avoid confusion to the user, the
setting is disabled.
2017-10-24 16:46:45 +02:00
Jack Ha
a66d27e30e
CURA-4176 reintroduced Wall Extruder. Added limit_to_extruder trick in wall_line_width as suggested in issue to evade inheritance problems.
2017-10-24 15:01:57 +02:00
Jack Ha
d8e1b5b9b4
CURA-4481 add setting Remove Empty First Layers
2017-10-24 11:25:12 +02:00
Jack Ha
4cfd0de580
CURA-4248 hide settings in UI for Surface Energy and Adhesion Tendency
2017-10-23 14:20:10 +02:00
Buco
f1d125b232
Added quality profiles
...
Made some changes to the main profiles and added quality profiles for each material.
2017-10-20 16:09:26 +02:00
ChrisTerBeke
3fcf20c714
Merge pull request #2564 from BagelOrb/slicing_mode
...
Adds a UI setting for the new slicing tolerance option in the engine.
2017-10-20 09:49:05 +02:00
Tim Kuipers
823d11f0e1
rename slicing mode ==> slicing tolerance
2017-10-19 17:14:01 +02:00
Tim Kuipers
4650a12324
slicing mode
2017-10-19 17:14:01 +02:00
Diego Prado Gesto
d3e8915b30
Merge branch 'master' into CURA-4248_BAM
2017-10-19 10:26:25 +02:00
Lipu Fei
475f6223d4
Remove executable bit for json files
2017-10-19 10:24:38 +02:00
ChrisTerBeke
795eda64e3
Merge branch 'master' into CURA-4248_BAM
2017-10-18 15:08:51 +02:00
ChrisTerBeke
78ba3c3aa0
Move BAM equations to BAM quality profiles as they are very specific - CURA-4248
2017-10-18 13:51:06 +02:00
