3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2025-07-12 01:07:52 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2
34356 commits 302 branches 270 tags 770 MiB
Commit graph

15419 commits

Author SHA1 Message Date
jspijker
e43c451745 Fixed failing UT 
These default_values don't work anymore,
since the values are set in fdm_printer
 2023-02-21 16:23:38 +01:00
Remco Burema
cf922295db Try before the beta. After it's too late. 
A lot was changed in support. The short of it is that we now think towers should be on by default, but aren't _completely_ certain about it. It makes more sense to do make this change before the beta rather than just before stable, so we have a chance to revert should it prove disastrous.
 2023-02-21 15:43:12 +01:00
Rijk van Manen
79a9f254b1 disable support interface floor and bottom 
CURA-10289 / PP-323
 2023-02-21 15:00:50 +01:00
Rijk van Manen
d938d9f1c1 turn off minimum support area completely it is not helpful anymore. 
CURA-10289 / PP-323
 2023-02-21 14:59:08 +01:00
Rijk van Manen
0b6edce20a increase support horizontal expansion 
We introduced a smoothing distance effectively introducing a negative horizontal expansion as well. So adding this smoothing distance to the horizontal expansion to compensate for this.

CURA-10289/PP-323
 2023-02-21 11:57:24 +01:00
Rijk van Manen
e9634fa8d9 revert support join distance and tower diameter 
We made it a bit too bulky, this is not useful anymore

CURA-10289/PP-323
 2023-02-21 11:56:21 +01:00
highpower
f974ca467a fix typo 2023-02-20 21:50:16 -08:00
Hao Xu
d315376492
Update resources/definitions/snapmaker2_dual.def.json 
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
 2023-02-20 21:45:06 -08:00
Hao Xu
b91e319062
Update resources/definitions/snapmaker2_dual.def.json 
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
 2023-02-20 21:45:00 -08:00
highpower
c23aa5ca22 add Snapmaker 2.0 Dual Extruder Definitions 2023-02-20 20:49:28 -08:00
c.lamboo
1f1353802a Prefill material sync file name 
CURA-10174
 2023-02-20 17:41:07 +01:00
Rijk van Manen
f7fd02cde9 warnings at same value as max don't make sense 
PP-324
 2023-02-20 17:06:49 +01:00
Cláudio 'Patola' Sampaio
656d336b03 Updated strings for pt_BR 2023-02-17 17:42:13 +01:00
pkuiper-ultimaker
167b9a0ef3 Applied printer-linter format 2023-02-17 08:55:10 +00:00
Paul Kuiper
434b6f13c1 Consistent max. and warning for the build plate temperature. 
S-line + Colorado   warning >120C  and error >140C
UM3 family          error > 115C
UM2 family          error > 110C

Relates to PP-324
 2023-02-17 09:54:08 +01:00
Miroslav Sustek
f1b3389cf2 Czech translations for v5.3 2023-02-16 20:35:52 +01:00
Rijk van Manen
c6c9047757 reduce support join distance 
We changed the support join distance, so a smaller value is now better.

CURA-10289/PP-323
 2023-02-15 16:21:09 +01:00
rijkvanmanen
482d5d38b7 Applied printer-linter format 2023-02-15 12:55:28 +00:00
Rijk van Manen
35ad0ccb0d improve support settings and properly enable them 
As a result of all the support improvements we have done in CURA-10220 we would like to update the support settings.

CURA-10289 / PP-323
 2023-02-15 13:54:09 +01:00
Rijk van Manen
63f5916cfb move support brim to fdmprinter 
PP-249
 2023-02-15 13:30:44 +01:00
rijkvanmanen
bd2f09dc42 Applied printer-linter format 2023-02-15 13:30:33 +01:00
Rijk van Manen
033e4c8073 set support brim width to 3 line widths 
PP-249
 2023-02-15 13:30:14 +01:00
Rijk van Manen
957ea8541f enable support brim by default 
remove all support brim mention in the profiles and move this to ultimaker.def.json
PP-249
 2023-02-15 13:29:58 +01:00
Joey de l'Arago
d0c0b0584a Add removed translations back 
CURA-10183
 2023-02-09 17:49:54 +01:00
rijkvanmanen
651d278377 Applied printer-linter format 2023-02-09 14:29:26 +01:00
Rijk van Manen
0735748dee cool_min_temperature can now follow default 
PP-71
 2023-02-09 14:29:16 +01:00
Jelle Spijker
07e8bae15f
Merge pull request #14524 from Ultimaker/5.3 
5.3
 2023-02-09 14:28:35 +01:00
Rijk van Manen
9088ab23f4 cleanup initial print temperatures 
In the initial PR for PP-71 I only cleaned up material_final_print_temperatures, but now the material_initial_print_temperatures are also coming into play, so I cleaned those as well. From research for PP-123 I know this is a safe change. Due to this cleanup the cool_min_temperature can now always follow the ultimaker default settings.
 2023-02-09 14:28:11 +01:00
Rijk van Manen
f8edf89375 avoid too low cool_min_temperature 
By taking the max value it is not possible anymore that a (3rd party) profile has a too low cool_min_temperature causing it too not slice. PP-71
 2023-02-09 14:27:59 +01:00
Rijk van Manen
ebdfee0fef update cool_min_temperature lower limit 
The cool_min_temperature should be larger then both the initial and final temperature too avoid that the printer is heating too much and later on waits for cooling. We could make the limit less strict for single extrusion. PP-71
 2023-02-09 14:27:34 +01:00
Rijk van Manen
c36fcfcbd2 reduce the interlocking_boundary_avoidance 
The interlocking_boundary_avoidance was a bit larger originally to prevent interlocking structures outside the model for edge cases. But this behaviour is improved a lot, so the boundary avoidance can be reduced, which helps for thin and small structures.
PP-283
 2023-02-09 10:26:43 +01:00
c.lamboo
8574e5866c Fix: Only set support_tower_roof_angle to 0 if support_interface is enabled 
Contributes to CURA-10220

Co-authored-by: Rijk van Manen <rijk.vanmanen@ultimaker.com>
 2023-02-09 10:24:44 +01:00
Jelle Spijker
5fb51d3535
Merge pull request #14515 from Ultimaker/CURA-10220_support_towers_reenabled 
Cura 10220 support towers reenabled
 2023-02-09 10:17:30 +01:00
Rijk van Manen
d981234df3 disable interface extruder if no interface is enabled 
CURA-10254
 2023-02-09 09:29:24 +01:00
MariMakes
36a5f8e418 Merge branch '5.3' of https://github.com/Ultimaker/Cura into 5.3 2023-02-08 18:23:00 +01:00
MariMakes
d2a1daa82a Update 53 beta changelog 
Fixed a few typos, added links and reminder that this version does not include tree support.
 2023-02-08 18:22:47 +01:00
Remco Burema
388e1a52ef Merge branch '5.3' 2023-02-08 17:26:55 +01:00
casperlamboo
fba299280f Applied printer-linter format 2023-02-08 15:15:40 +00:00
Casper Lamboo
b37d80a546
Don't duplicate default setting 
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
 2023-02-08 16:14:24 +01:00
c.lamboo
06c0ccb572 Only set support_tower_roof_angle to 0 if support_interface is enabled 
Contributes to CURA-10220

Co-authored-by: Rijk van Manen <rijk.vanmanen@ultimaker.com>
 2023-02-08 16:01:44 +01:00
c.lamboo
44b71dd8f1 Update support horizontal expansion value 
Contributes to CURA-10220

Co-authored-by: Rijk van Manen <rijk.vanmanen@ultimaker.com>
 2023-02-08 16:01:34 +01:00
c.lamboo
46fe9c0568 Set support tower angle to 0 
This enlarges small areas to immediately be equal to support_tower_diameter^2.

Contributes to CURA-10220

Co-authored-by: Rijk van Manen <rijk.vanmanen@ultimaker.com>
 2023-02-08 16:01:22 +01:00
c.lamboo
046d6ab01c Re-enable support towers 
Decrease `support_offset` setting as using both support towers and support horizontal expansion would apply the same concept twice.
Remove duplicate settings in other ultimaker profiles.

Contributes to CURA-10220

Co-authored-by: Rijk van Manen <rijk.vanmanen@ultimaker.com>
 2023-02-08 16:01:08 +01:00
Joey de l'Arago
cd09717a64 This onclick is already passed in where it is needed. It is being triggered unnecessarily when switching support extruder in recommended mode. 
CURA-10233
 2023-02-08 13:42:30 +01:00
MariMakes
db800551aa CURA-10252_Update-changelog-5.3 
Update Changelog for Cura 5.3
 2023-02-07 15:40:13 +01:00
Jaime van Kessel
129232101e
Remove ultibot mesh 
It's 8mb and it's not being used anywhere. So sorry 'lil buddy, but you have to go :(
 2023-02-07 15:15:23 +01:00
Brad
7dd6335f4b
Outdated definition was updated 2023-02-04 20:50:37 +03:00
Brad
18020338ea
Fixed linter error 2023-02-04 20:41:23 +03:00
Brad
e93dd8857d
Rename longer_lk4_x.def.json to longer_lk4x.def.json 2023-02-04 20:31:51 +03:00
Brad
92bcacfaaa
Create longer_lk4x_0.4.inst.cfg 2023-02-04 20:31:14 +03:00